Startseite Effect of Annealing Temperature on PP Microporous Membranes Obtained by a Melt-Extrusion-Stretching Method
Artikel Open Access

Effect of Annealing Temperature on PP Microporous Membranes Obtained by a Melt-Extrusion-Stretching Method

  • Z.-Y. Liu , X.-T. Wu , J. Yan , W. Yang und M.-B. Yang
Veröffentlicht/Copyright: 1. August 2019
Artikel downloaden (PDF)
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 34 Heft 4

Received: 2018-10-17
Accepted: 2019-05-12
Published Online: 2019-08-01
Published in Print: 2019-08-13

© 2019, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Influence of Post-Treatment Media on Morphological Changes in Transient Macromolecules of Polymeric Fibers
  5. The Influence of Mechanical Recycling on Properties in Injection Molding of Fiber-Reinforced Polypropylene
  6. Study on Influence of Co-Injection Molding Process on Self-Reinforcing Characteristics of Self-Reinforced Polypropylene Composite via Visualization
  7. Influence of Ultrasonic Transducer Structural Parameters on the Frictional Plasticizing Heat Generation of Polymer Particles
  8. Influence of the Mold Temperature and Part Thickness on the Replication Quality and Molecular Orientation in Compression Injection Molding of Polystyrene
  9. Study of Bonding Formation between the Filaments of PLA in FFF Process
  10. Rheology and Extrusion Foaming of Partially Crosslinked Thermoplastic Vulcanizates Silicone
  11. Influence of Rubber Ratio and Crosslinking Agent on Mechanical Properties, Crystallization and Rheological Behaviors of EPDM/PP Thermoplastic Elastomer
  12. Effect of Annealing Temperature on PP Microporous Membranes Obtained by a Melt-Extrusion-Stretching Method
  13. PPS News
  14. PPS News
  15. Seikei Kakou Abstracts
  16. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.3774
Creative Commons
BY 4.0

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Influence of Post-Treatment Media on Morphological Changes in Transient Macromolecules of Polymeric Fibers
  5. The Influence of Mechanical Recycling on Properties in Injection Molding of Fiber-Reinforced Polypropylene
  6. Study on Influence of Co-Injection Molding Process on Self-Reinforcing Characteristics of Self-Reinforced Polypropylene Composite via Visualization
  7. Influence of Ultrasonic Transducer Structural Parameters on the Frictional Plasticizing Heat Generation of Polymer Particles
  8. Influence of the Mold Temperature and Part Thickness on the Replication Quality and Molecular Orientation in Compression Injection Molding of Polystyrene
  9. Study of Bonding Formation between the Filaments of PLA in FFF Process
  10. Rheology and Extrusion Foaming of Partially Crosslinked Thermoplastic Vulcanizates Silicone
  11. Influence of Rubber Ratio and Crosslinking Agent on Mechanical Properties, Crystallization and Rheological Behaviors of EPDM/PP Thermoplastic Elastomer
  12. Effect of Annealing Temperature on PP Microporous Membranes Obtained by a Melt-Extrusion-Stretching Method
  13. PPS News
  14. PPS News
  15. Seikei Kakou Abstracts
  16. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 29.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.3774/html
Button zum nach oben scrollen