On Induced Properties and Self Heating during Free Blowing of PET Preform

References

Bedoui, F., “Etude du Comportement Elastique et Viscoélastique Linéaire des Polymères Semi-Cristallins par Approche Micromécanique”, PhD Thesis, ENSAM, Paris (2005)Search in Google Scholar

Champin, C., “Modélisation 3D du Chauffage par Rayonnement Infrarouge et de l'étirage Soufflage de Corps Creux en PET”, PhD Thesis, Ecole Nationale Supérieure Des Mines De Paris, Sophia-Antipolis (2007)Search in Google Scholar

Chevalier, L., Linhone, C. and Reigner, G., “Induced Crystallinity during Stretch-Blow Moulding Process and its Influence on Mechanical Strength of Poly(ethylene terephthalate) Bottles”, Plast. Rubber Compos., 28, 8, 393–401 (1999) 10.1179/146580199101540547Search in Google Scholar

Cosson, B., “Modélisation et Simulation Numérique du Procédé de Soufflage par Bi-Orientation des Bouteilles en PET: Evolution de Microstructure, Evolution de Comportement”, PhD Thesis, University Paris-Est, Marne-la-Vallée (2008)Search in Google Scholar

Cosson, B., Chevalier, L. and Régnier, G., “Simulation of the Stretch Blow Moulding Process: From the Modelling of the Microstructure Evolution to the End-Use Elastic Properties of Polyethylene Terephthalate Bottles“, Int. J. Mater. Form., 5, 1, 39–53 (2012) 10.1007/s12289-010-1010-ySearch in Google Scholar

Erchiqui, F., Hamani, I. and Charrette, A., “Modélisation par Eléments Finis du Chauffage Infrarouge des Membranes Thermoplastiques Semi-Transparentes”, Int. J. Therm. Sci., 48, 73–84 (2009) 10.1016/j.ijthermalsci.2008.03.007Search in Google Scholar

Gong, Y. H., “Sur l'Analyse Multiéchelle du Changement de Morphologie du PET sous l'effet de la Température ou des Sollicitations Mécaniques”, PhD Thesis, University Paris-Est, Marne-la-Vallée (2018)Search in Google Scholar

Hild, F., Roux, S.: Optical Methods for Solid Mechanics. A Full-Field Approach, Wiley-VCH, Weinheim, 183–228 (2012)Search in Google Scholar

Hild, F., Roux, S., Gras, R., Guerrero, M., Marante, E. and Florez-Lopez, J., “Optics and Lasers in Engineering”, Optical Measurements, 47, 495–503 (2009)10.1016/j.optlaseng.2008.03.006Search in Google Scholar

Huang, H. X., Deng, Y. H. and Huang, Y. F., “Temperature Profiles within Reheated Preform in Stretch Blow Molding”, ANTEC'05, Boston, Massachusetts (2005)Search in Google Scholar

Lebaudy, P., Saiter, J. M., Grenet, J. and Vautier, C., “Temperature Distribution in Poly(ethylene terephthalate) Plate Undergoing Heat Treatment. Diffusion Influence and Application”, Polymer, 36, 1217–1221 (1995) 10.1016/0032-3861(95)93923-ASearch in Google Scholar

Luo, Y. M., Chevalier, L., Monteiro, E. and Utheza, F., “Self Heating during Stretch Blow Molding: An Experimental Numerical Comparison”, 20^th International ESAFORM Conference on Material Forming, Dublin, Ireland (2017) 10.1063/1.5008066Search in Google Scholar

Luo, Y. M., Chevalier, L., Utheza, F. and Monteiro, E., “Numerical Simulation of the Thermodependant Visco-Hyperelastic Behaviour of PET near the Glass Transition Temperature: Prediction of the Self Heating during Biaxail Tension Test”, Polymer Eng. Sci., 53, 2683–2695 (2013) 10.1002/pen.23522Search in Google Scholar

Marco, Y., “Caractérisation Multi-Axiale du Comportement et de la Micro-Structure d'un Semi-Cristallin: Application au Cas du P.E.T.”, PhD Thesis, ENS Cachan, Cachan (2003)Search in Google Scholar

Menary, G., “The Effect of Temperature, Strain Rate and Strain on the Induced Mechanical Properties of Biaxially Stretched PET”, 17^th Annual ESAFORM Conference on Material Forming, Erlangen, Germany (2012) 10.4028/www.scientific.net/KEM.504-506.1117Search in Google Scholar

Monteix, S., Schmidt, F. and Le Maoult, Y., “Experimental Study and Numerical Simulation of Preform or Sheet Exposed to Infrared Radiative Heating”, J. Mater. Process. Technol., 119, 90–97 (2001) 10.1016/S0924-0136(01)00882-2Search in Google Scholar

Pierron, F., Grediac, M.,: The Virtual Fields Method: Extracting Constitutive Mechanical Parameters From Full- Field Deformation Measurements”, Springer Science and Business Media, Berlin (2012)Search in Google Scholar

Salomeia, Y. M., Menary, G. H. and Armstrong, C. G., “Experimental Investigation of Stretch Blow Molding, Part 1: Instrumentation in an Industrial Environment”, Adv. Polym. Tech., 32, S1, E771–E783 (2013) 10.1002/adv.21291Search in Google Scholar

Schmidt, F. M., Le Maoult, Y. and Monteix, S., “Modelling of Infrared Heating of Thermoplastic Sheet Used in Thermoforming Process”, J. Mater. Process. Technol., 143–144, 225–231 (2003)10.1016/S0924-0136(03)00291-7Search in Google Scholar

Venkateswaran, G., Cameron, M. R. and Jabarin, S. A., “Effects of Temperature Profiles through Preform Thickness on the Properties of Reheat – Blown PET Containers”, Adv. Polym. Tech., 17, 237–249 (1998) 10.1002/(SICI)1098-2329(199823)17:3<237::AID-ADV4>3.0.CO;2-TSearch in Google Scholar

Yousefi, A., Di Raddo, R. and Bendada, A., “Simulation of the Mobile Preform Reheat in Injection Stretch Blow Moulding Process”, PPS-17, The Polymer Processing Society, p. 134–146 (2001)Search in Google Scholar

Zimmer, J., Chauvin, G. and Stommel, M., “Experimental Investigation and Numerical Simulation of Liquid Supported Stretch Blow Molding”, Polym. Eng. Sci., 55, 933–944 (2015) 10.1002/pen.23961Search in Google Scholar

Zimmer, J., Klein, D. and Stommel, M., “Experimental and Numerical Analysis of Liquid-Forming”, Key Eng. Mater., 651–653, 842–847 (2015)10.4028/www.scientific.net/KEM.651-653.842Search in Google Scholar