Startseite Rheology and Foaming of Long-Chain Branched Ethylene-Tetrafluoroethylene Copolymer and Its Blends
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Rheology and Foaming of Long-Chain Branched Ethylene-Tetrafluoroethylene Copolymer and Its Blends

  • E. Nishi , T. Satou , S. K. Sukumaran , T. Katou , M. Sugimoto und K. Koyama
Veröffentlicht/Copyright: 27. April 2018
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

The long-chain branched ethylene-tetrafluoroethylene copolymer (B-ETFE) was synthesized by radical polymerization using ethylene, tetrafluoroethylene, termonomer, and a very small amount of divinyl monomer. We studied melt rheology under shear and elongational flow, and foamability for B-ETFE, comparing with conventional linear ETFE. Addition of a small amount of the divinyl monomer had a considerable impact on the melt rheology of ETFE and its blends. The observed non-linear elongational behavior and emergence of long relaxation time components can be explained by long-chain branching in the modified ETFE. B-ETFE and its blends showed excellent foaming processability: uniform and smaller cell sizes and much higher cell number densities than those of linear ETFE. To the best of our knowledge, this is the first report of the enhancement of the melt rheology of ETFE from the viewpoint of modification of its molecular architecture.


*Correspondence address, Mail address: Masataka Sugimoto, Graduate School of Organic Materials Science, Yamagata University, 4-3-16 Jonan, Yonezawa 992-8510, Japan, E-mail:

References

Abe, S., Yamaguchi, M., “Study on the Foaming of Crosslinked Polyethylene”, J. Appl. Polym. Sci., 79, 21462155 (2001) 10.1002/1097-4628(20010321)79:12<2146::AID-APP1022>3.0.CO;2-QSuche in Google Scholar

Anna, S. L., McKinley, G.H., “Elasto-Capillary Thinning and Breakup of Model Elastic Liquids”, J. Rheol., 45, 115138 (2001) 10.1122/1.1332389Suche in Google Scholar

Aoki, Y., Hirayama, K., Kikuchi, K., Sugimoto, M. and Koyama, K., “Uniaxial Elongational Behavior of Poly(vinyl chloride) Physical Gel”, Rheol. Acta, 49, 10711076 (2010) 10.1007/s00397-010-0483-4Suche in Google Scholar

Arai, K., Funaki, A., Aida, S., Phongtamrug, S. and Tashiro, K., “Influence of Third Monomer on the Crystal Phase Transition Behavior of Ethylene-Tetrafluoroethylene Copolymer”, Polymer, 49, 54975503 (2008) 10.1016/j.polymer.2008.10.009Suche in Google Scholar

Arai, K., Funaki, A., Aida, S., Phongtamrug, S. and Tashiro, K., “Influence of the Monomer Sequential Distribution on the Mechanical Properties and Temperature Dependence of an Ethylene-tetrafluoroethylene Copolymer in Association with the Phase-transition Behavior”, J. Appl. Polym. Sci., 114, 17101716 (2009a) 10.1002/app.30660Suche in Google Scholar

Arai, K., Funaki, A., Aida, S., Phongtamrug, S. and Tashiro, K., “Influence of Side Branches on the Elastic Modulus of Ethylene-tetrafluoroethylene Terpolymers”, Polymer, 50, 46124617 (2009b) 10.1016/j.polymer.2009.07.029Suche in Google Scholar

Drobny, J. G.: Technology of Fluoropolymers, 2nd Edition, CRC Press, Boca Raton (2004) 10.1201/9781420042672Suche in Google Scholar

Ferry, J. D.: Viscoelastic Properties of Polymers, 3rd Edition, Wiley, New York (1980)Suche in Google Scholar

Graebling, D., “Synthesis of Branched Polypropylene by a Reactive Extrusion Process”, Macromolecules, 35, 46024610 (2002) 10.1021/ma0109469Suche in Google Scholar

Hodder, P., Franck, A., “A New Tool for Measuring Extensional Viscosity”, Ann. Trans. Nord. Rheol. Soc., 13, 227232 (2005)Suche in Google Scholar

Koyama, K., Ishizuka, O., “Nonlinearity in Uniaxial Elongational Viscosity at a Constant Strain Rate”, Polym. Proc. Eng., 1, 5570 (1983)Suche in Google Scholar

Koyama, K., Ishizuka, O., “Elongation Flow of Polymer Melt”, Nihon Reoroji Gakkaishi, 13, 93100 (1985) 10.1678/rheology1973.13.3_93Suche in Google Scholar

Li, S., Xiao, M., Guan, Y., Wei, D., Xiao, H. and Zheng, A., “Polydimethylsiloxane Assisted Supercritical CO2 Foaming Behavior of High Melt Strength Polypropylene Grafted with Styrene”, Euro. Polym. J., 48, 362371 (2012) 10.1016/j.eurpolymj.2011.11.015Suche in Google Scholar

Minegishi, A., Nishioka, A., Takahashi, T., Masubuchi, Y., Takimoto, J. and Koyama, K., “A Novel Elongational Rheology Control of PS by SBS and Dicumyl Peroxide”, Nihon Reoroji Gakkaishi, 33, 141144 (2005) 10.1678/rheology.33.141Suche in Google Scholar

Nam, G. J., Yoo, J. H. and Lee, J. W., “Effect of Long-Chain Branches of Polypropylene on Rheological Properties and Foam-Extrusion Performances”, J. Appl. Polym. Sci., 96, 17931800 (2005) 10.1002/app.21619Suche in Google Scholar

Ogura, K., Takahashi, M., “Uniaxial Extension Behavior of Cross-linked Poly(methylmethacrylate)s with Various Degrees of Cross-linking”, Nihon Reoroji Gakkaishi, 31, 8589 (2003) 10.1678/rheology.31.85Suche in Google Scholar

Otsuki, Y., Kanai, T., Taki, K. and Ohshima, M., “Viscoelastic Simulation of Bubble Growth in Polymeric Foaming”, Seikei-Kakou (JJSPP), 15, 638645 (2003) 10.4325/seikeikakou.15.638Suche in Google Scholar

Petraccone, V., De Rosa, C., Guerra, G., Iuliano, M. and Corradini, P., “Fourier-Transform Analysis of Models for the Orthorhombic Crystal Phase of the Alternating Ethylene-tetrafluoroethylene Copolymer”, Polymer, 33, 2226 (1992) 10.1016/0032-3861(92)90554-ASuche in Google Scholar

Phongtamrug, S., Tashiro, K., Funaki, A., Arai, K. and Aida, S., “Structural Study of a Series of Ethylene-Tetrafluoroethylene Copolymers with Various Ethylene Contents, Part 1: Structure at Room Temperature Investigated for Uniaxially-oriented Samples by an Organized Combination of 2D-WAXD/SAXS and IR/Raman Spectra”, Polymer, 49, 561569 (2008) 10.1016/j.polymer.2007.11.036Suche in Google Scholar

Phongtamrug, S., Tashiro, K., Funaki, A., Arai, K. and Aida, S., “Structural Study of a Series of Ethylene-Tetrafluoroethylene Copolymers with Various Ethylene Contents, Part 2: Phase Transition Behavior Investigated by Temperature Dependent Measurements of X-ray Fiber Diagrams”, Polymer, 49, 50725083 (2008) 10.1016/j.polymer.2007.11.036Suche in Google Scholar

Pieper, T., Heise, B. and Wilke, W., “Wide-angle X-ray Studies on Ethylene-tetrafluoroethylene (ETFE) Copolymers”, Polymer, 30, 17681775 (1989) 10.1016/0032-3861(89)90344-3Suche in Google Scholar

Taki, K., Tabata, K., Kihara, S. and Ohshima, M., “Bubble Coalescence in Foaming Process of Polymers”, Polym. Eng. Sci., 46, 680690 (2006) 10.1002/pen.20521Suche in Google Scholar

Tanigami, T., Yamaura, S., Matsuzawa, S., Ishikawa, M., Mizoguchi, K. and Miyasaka, K., “Structural Studies on Ethylene-Tetrafluoroethylene Copolymer 1. Crystal Structure”, Polymer, 7, 9991006 (1986a) 10.1016/0032-3861(86)90063-7Suche in Google Scholar

Tanigami, T., Yamaura, S., Matsuzawa, S., Ishikawa, M., Mizoguchi, K. and Miyasaka, K., “Structural Studies on Ethylene-Tetrafluoroethylene Copolymer: 2. Transition from Crystal Phase to Mesophase”, Polymer, 27, 15211528 (1986b) 10.1016/0032-3861(86)90063-7Suche in Google Scholar

Trouton, F. T., “On the Coefficient of Viscous Traction and its Relation to That of Viscosity”, Proc. Roy. Soc., A77, 426440 (1906) 10.1098/rspa.1906.0038Suche in Google Scholar

Xiao, M., Li, S., Wei, D., Xiao, H., Zheng, A. and Hu, F., “The Melt Grafting Preparation and Rheological Characterization of Long Chain Branching Polypropylene”, Polymer, 50, 61216128 (2009) 10.1016/j.polymer.2009.10.006Suche in Google Scholar

Yamaguchi, M., Suzuki, K., “Rheological Properties and Foam Processability for Blends of Linear and Crosslinked Polyethylenes”, J. Polym. Sci., Part B: Polym. Phys., 39, 21592167 (2001) 10.1002/polb.1189Suche in Google Scholar

Zirkel, L., Jakob, M. and Münstedt, H., “Foaming of Thin Films of a Fluorinated Ethylene Propylene Copolymer Using Supercritical Carbon Dioxide”, J. Supercrit. Fluids, 49, 103110 (2009) 10.1016/j.supflu.2008.11.013Suche in Google Scholar

Received: 2017-03-28
Accepted: 2017-07-14
Published Online: 2018-04-27
Published in Print: 2018-05-27

© 2018, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Influence of Glass Microsphere Filler on the Rheological Behavior of an Epoxy Resin
  5. Morphology and Mechanical Properties of Itaconic Anhydride Grafted Poly(lactic acid) and Thermoplastic Protein Blends
  6. An Effective α/β Nucleating Agent Compoundfor the Preparation of Polypropylene
  7. Experimental and Theoretical Study on Screw Filling in Starve Fed Single Screw Extruders
  8. The Role of Extrusion Conditions on the Mechanical Properties of Thermoplastic Protein
  9. Investigation of the Behavior of Organo-Metallic Compound and Its Influence on Polyurethane
  10. A Novel Technique for Manufacturing Polypropylene Based Functionally Graded Materials
  11. Development of a Segmented Temperature Control for Targeted Solidification in Injection Molding
  12. Rheology and Foaming of Long-Chain Branched Ethylene-Tetrafluoroethylene Copolymer and Its Blends
  13. Optical and Structural Characteristics of CdSe/PMMA Nanocomposites
  14. Crystallization Behavior of Polyvinyl Alcohol with 1,2-Diol Side-Chains
  15. Effects of Mean Particle Size and Addition Weight Percentage of CaCO3 on Selected Rheological Properties of Filled LDPE
  16. Using a Visualization Mold to Discuss the Influence of Gas Counter Pressure and Mold Temperature on the Fountain Flow Effect
  17. Recycling of Virgin and Post-Consumer Polypropylene and High Density Polyethylene
  18. An Open-Source Framework for the Computer Aided Design of Complex Profile Extrusion Dies
  19. Rapid Communications
  20. Investigation of the Mechanical and Thermal Properties of LFR PA66 with Graphene Coating on Fibre Surface
  21. PPS News
  22. PPS News
  23. Seikei Kakou Abstracts
  24. Seikei-Kakou Abstracts
Heruntergeladen am 1.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.3468/html
Button zum nach oben scrollen