Startseite Advanced Finite Element 3D Injection Molding
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Advanced Finite Element 3D Injection Molding

  • L. Silva , C. Gruau , J.-F. Agassant , T. Coupez und J. Mauffrey
Veröffentlicht/Copyright: 30. April 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 20 Heft 3

Abstract

In this paper, we present aspects and examples relating to Rem3D, a 3D finite element software dedicated to the computation of the entire injection molding cycle (filling, packing and cooling). Recent developments are presented, namely mesh generation and adaptation driven by a local natural metric, compressible Stokes and temperature solvers, as well as a multidomain approach. As an example of the application of Rem3D, computations have been compared with well instrumented experiments for a complex mold geometry.

∗ Mail address: L. Silva, CEMEF-ENSMP, rue Claude Daunesse, 06904 Sophia-Antipolis, France E-mail:

References

1 Harry, D. H., Parrot, R. G.: Polym. Eng. Sci.10, p. 209 (1970).10.1002/pen.760100404Suche in Google Scholar

2 Chiang, H. H., Hieber, C. A., Wang, K. K.: Polym. Eng. Sci.31, p. 140 (1991).10.1002/pen.760310212Suche in Google Scholar

3 Chen, B. S., Liu, W. H.: Polym. Eng. Sci.34, p. 835 (1994).10.1002/pen.760341009Suche in Google Scholar

4 Han, K.-H., Im, Y.-T.: Composite Structures38, p. 179 (1997).10.1016/S0263-8223(97)00054-8Suche in Google Scholar

5 Ilinca, F., Hétu, J.-F.: Intern. Polym. Process.16 (3), p. 291 (2001).10.3139/217.1643Suche in Google Scholar

6 Ilinca, F., Hétu, J.-F.: Polym. Eng. Sci.43, p. 1415 (2003).10.1002/pen.10120Suche in Google Scholar

7 www.moldflow.com/Products/MPI/modules/3d.asp.Suche in Google Scholar

8 Pichelin, E., Coupez, T.: Computer Methods in Applied Mechanics and Engineering163, p. 359 (1998).10.1016/S0045-7825(98)00024-3Suche in Google Scholar

9 Silva, L., Barre, M., Digonnet, H., Gruau, C., Rodriguez-Villa, A., Agassant, J.-F., Coupez, T.: Paper presented at the 16ème Congrès Français de Mécanique. Nice (2003).Suche in Google Scholar

10 Gruau, C., Coupez, T., in: Adaptive Modelling and Simulation, Wiberg, N.-E., Dìez, P. (Eds.), Göteborg (2003).Suche in Google Scholar

11 Gruau, C., Coupez, T.: Computer Methods in Applied Mechanics and Engineering, accepted.Suche in Google Scholar

12 Coupez, T., Bigot, E., in: European Congress on Computational Methods in Applied Sciences and Engineering, Onate, E., Bugenda, G., Suárez, B. (Eds.), Barcelona (2000).Suche in Google Scholar

13 Batkam, S., Bruchon, J., Coupez, T.: International Journal of Forming Processes7 (1), p. 11 (2004).10.3166/ijfp.7.11-33Suche in Google Scholar

14 Silva, L., Valette, R., Coupez, T.: Journal of Non-Newtonian Fluid Mechanics, submitted.Suche in Google Scholar

15 Agassant, J.-F., Avenas, P., Sergent, J.-P., Vergnes, B., Vincent, M.: La Mise en Forme des Matières Plastiques. Lavoisier, Paris (1996).Suche in Google Scholar

16 Mahishi, M.: Paper presented at the Annual Technical Conference of the Society of Plastics Engineers (1998).Suche in Google Scholar

17 Callen, H. B.: Thermodynamics. John Wiley, New York (1960).Suche in Google Scholar

18 Silva, L., Gruau, C, Agassant, J.-F., Coupez, T., Rodriguez-Villa, A.: Rem3D: Advanced finite element model for 3D injection molding, Paper presented at the Annual Polymer Processing Society Conference (PPS 20), Akron, 2004.10.3139/217.1888Suche in Google Scholar

Received: 2004-7-18
Accepted: 2005-4-12
Published Online: 2013-04-30
Published in Print: 2005-09-01

© 2005, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Assessment of the Degree of Mixedness of Filled Polymers
  5. Screw Extrusion
  6. Numerical Analysis of Rubber Moulding Using Finite Element Modelling
  7. Regular Contributed Articles
  8. Experimental Study on the Filling of a Micro Injection Molding with Cylindrical Dot Patterns
  9. The Gloss of Injection-Moulded Recovered Polypropylene
  10. Injection Moulding and Mechanical Properties of Recovered Polypropylene
  11. Advanced Finite Element 3D Injection Molding
  12. Using Multi-Objective Evolutionary Algorithms to Optimize Mechanical Properties of Injection Molded Parts
  13. On PVT and Rheological Measurements of Polymer Melts
  14. External Calibration in PA12 Tube Extrusion
  15. Screw Extrusion
  16. External Calibration in PA12 Tube Extrusion
  17. Regular Contributed Articles
  18. Two Dimensional Description of Pressure-Throughput Behaviour of Newtonian Materials Considering Wall Slippage Effects
  19. Experimental Studies and Modeling of Development of Dispersion and Fiber Damage in Continuous Compounding
  20. PPS News
  21. PPS News
  22. Seikei-Kakou Abstracts
  23. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.1888

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Assessment of the Degree of Mixedness of Filled Polymers
  5. Screw Extrusion
  6. Numerical Analysis of Rubber Moulding Using Finite Element Modelling
  7. Regular Contributed Articles
  8. Experimental Study on the Filling of a Micro Injection Molding with Cylindrical Dot Patterns
  9. The Gloss of Injection-Moulded Recovered Polypropylene
  10. Injection Moulding and Mechanical Properties of Recovered Polypropylene
  11. Advanced Finite Element 3D Injection Molding
  12. Using Multi-Objective Evolutionary Algorithms to Optimize Mechanical Properties of Injection Molded Parts
  13. On PVT and Rheological Measurements of Polymer Melts
  14. External Calibration in PA12 Tube Extrusion
  15. Screw Extrusion
  16. External Calibration in PA12 Tube Extrusion
  17. Regular Contributed Articles
  18. Two Dimensional Description of Pressure-Throughput Behaviour of Newtonian Materials Considering Wall Slippage Effects
  19. Experimental Studies and Modeling of Development of Dispersion and Fiber Damage in Continuous Compounding
  20. PPS News
  21. PPS News
  22. Seikei-Kakou Abstracts
  23. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 8.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.1888/html
Button zum nach oben scrollen