Zum Hauptinhalt springen
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Polymer Processing Technology in the 21st Century from the Viewpoint of the Japanese Plastics Industry

Global Trends and Initiatives
Veröffentlicht/Copyright: 6. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 16 Heft 1

Abstract

Recent progress in polymerization easily allows the control of precise structure of a base polymer and accelerates lower-cost production using larger-scale-plants. In addition to this, today's more important issue in our industry is the development of the key-technology corresponding to a sustainable society. Under these circumstances, the polymer industry in Japan has been focussing on down-stream products from upper-stream using advanced processing technology. To meet today's trends, the polymer industry should establish more sophisticated technology in both higher functionality and hybridization to survive in the 21st century. In particular, various hybridized polymer-processing systems such as the combination of reactive extrusion and injection molding should be applied to create cost-effectiveness and less environmental burdens as well as higher performance.

* Mail address: Prof. Dr. T. Sakai, The Japan Steel Works, 1-1 Nikko-cho, Fuchu City, Tokyo 183-0044, Japan
Received: 2000-10-31
Accepted: 2000-10-31
Published Online: 2013-06-06
Published in Print: 2001-03-01

© 2001, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Editorial
  2. 10.3139/217.0101
  3. Invited Paper
  4. Polymer Processing Technology in the 21st Century from the Viewpoint of the Japanese Plastics Industry
  5. Screw Extrusion Blend
  6. Polymer Blends in Co-Rotating Twin-Screw Extruders
  7. Reactive Extrusion
  8. Polymerization of ∊-Caprolactone in a Twin Screw Extruder
  9. Fiber and Film
  10. Crystallization Studies of LLDPE during Tubular Blown Film Processing
  11. Numerical Study of Internal Bubble Cooling (IBC) in Film Blowing
  12. Modeling Heat Transfer with Crystallization in Rods and Filaments
  13. Molding
  14. Relevance of Crystallisation Kinetics in the Simulation of the Injection Molding Process
  15. Causes of Cracks in Petaloid Bottom of Carbonated PET Bottle
https://doi.org/10.3139/217.1621

Artikel in diesem Heft

  1. Editorial
  2. 10.3139/217.0101
  3. Invited Paper
  4. Polymer Processing Technology in the 21st Century from the Viewpoint of the Japanese Plastics Industry
  5. Screw Extrusion Blend
  6. Polymer Blends in Co-Rotating Twin-Screw Extruders
  7. Reactive Extrusion
  8. Polymerization of ∊-Caprolactone in a Twin Screw Extruder
  9. Fiber and Film
  10. Crystallization Studies of LLDPE during Tubular Blown Film Processing
  11. Numerical Study of Internal Bubble Cooling (IBC) in Film Blowing
  12. Modeling Heat Transfer with Crystallization in Rods and Filaments
  13. Molding
  14. Relevance of Crystallisation Kinetics in the Simulation of the Injection Molding Process
  15. Causes of Cracks in Petaloid Bottom of Carbonated PET Bottle
Heruntergeladen am 22.4.2026 von https://www.degruyterbrill.com/document/doi/10.3139/217.1621/html?lang=de
Button zum nach oben scrollen