Article
Licensed
Unlicensed Requires Authentication

Polímeros: Ciência e Tecnologia – Abstracts

Published/Copyright: April 6, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 27 Issue 1

Published Online: 2013-04-06
Published in Print: 2012-03-01

© 2012, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Foreword
  4. IPP Special Issue on “Advanced Molding and Materials Processing Technology”
  5. Invited Papers from SAMT Conference
  6. Solving Injection Molded Part Warpage under Asymmetric Mold Cooling Conditions by Corrugated Variations in Part Thickness
  7. Injection Molding of Water Containing Thermoplastic Polyolefin
  8. Effects of Pressure and Supercritical Fluid on Melt Viscosity of LDPE in Conventional and Microcellular Injection Molding
  9. Influence of Scale Effect on Filling Behavior of Injection Molding by Visualization Method
  10. Determination of Thermal Response on Mold Surface and Recommendation of Feasible Heating Time and Gas Flow Rate for a Circular Cavity by Gas Preheating
  11. Overall Control System for Injection Molding Process
  12. Structure, Injection Molding Process and Fracture Behavior of Composite Plastics
  13. Review Papers
  14. A Structured Review and Classification of Demolding Issues and Proven Solutions
  15. Regular Contributed Articles
  16. Quantifying Extrusion Modification of LDPE with a Microcompounder
  17. Measurement Modification of Barrier Properties against UV Irradiation of PP Composite Fibres
  18. Application of Dry Nano Powder Inverse Imprint Technology in Transferring and Replication of Micro Patterns
  19. Three-dimensional Numerical Study of the Mixing Behaviour of Twin-screw Elements
  20. The Rheological and Mechanical Properties of PVC-Lignin Blends
  21. Three-Dimensional Observation on the Liquid Emptying Process from a Scaled-up Gravure Cell
  22. Radio-Frequency Compression Molding of Recycled Commingled Polymers
  23. PPS-News
  24. PPS News
  25. Seikei Kakou Abstracts
  26. Seikei-Kakou Abstracts
  27. Polímeros: Ciência e Tecnologia – Abstracts
  28. Polímeros: Ciência e Tecnologia – Abstracts
https://doi.org/10.3139/217.1216

Articles in the same Issue

  1. Contents
  2. Contents
  3. Foreword
  4. IPP Special Issue on “Advanced Molding and Materials Processing Technology”
  5. Invited Papers from SAMT Conference
  6. Solving Injection Molded Part Warpage under Asymmetric Mold Cooling Conditions by Corrugated Variations in Part Thickness
  7. Injection Molding of Water Containing Thermoplastic Polyolefin
  8. Effects of Pressure and Supercritical Fluid on Melt Viscosity of LDPE in Conventional and Microcellular Injection Molding
  9. Influence of Scale Effect on Filling Behavior of Injection Molding by Visualization Method
  10. Determination of Thermal Response on Mold Surface and Recommendation of Feasible Heating Time and Gas Flow Rate for a Circular Cavity by Gas Preheating
  11. Overall Control System for Injection Molding Process
  12. Structure, Injection Molding Process and Fracture Behavior of Composite Plastics
  13. Review Papers
  14. A Structured Review and Classification of Demolding Issues and Proven Solutions
  15. Regular Contributed Articles
  16. Quantifying Extrusion Modification of LDPE with a Microcompounder
  17. Measurement Modification of Barrier Properties against UV Irradiation of PP Composite Fibres
  18. Application of Dry Nano Powder Inverse Imprint Technology in Transferring and Replication of Micro Patterns
  19. Three-dimensional Numerical Study of the Mixing Behaviour of Twin-screw Elements
  20. The Rheological and Mechanical Properties of PVC-Lignin Blends
  21. Three-Dimensional Observation on the Liquid Emptying Process from a Scaled-up Gravure Cell
  22. Radio-Frequency Compression Molding of Recycled Commingled Polymers
  23. PPS-News
  24. PPS News
  25. Seikei Kakou Abstracts
  26. Seikei-Kakou Abstracts
  27. Polímeros: Ciência e Tecnologia – Abstracts
  28. Polímeros: Ciência e Tecnologia – Abstracts
Downloaded on 12.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.1216/html
Scroll to top button