Startseite Seikei-Kakou Abstracts
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Seikei-Kakou Abstracts

Veröffentlicht/Copyright: 6. April 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 25 Heft 3

Published Online: 2013-04-06
Published in Print: 2010-07-01

© 2010, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Improvement in the Scratch Resistance of Polymers by Roller Burnishing Process
  5. Effect of Processing Conditions on the Dispersion of Vapor Grown Carbon Fiber in a Polyamide 6 and the Crystalline Structure of their Composites by Melt Compounding
  6. Dynamics of Filler Size and Spatial Distribution in a Plasticating Single Screw Extruder – Modeling and Experimental Observations
  7. Modification of Polyester Fibers by Bactericides Using Crazing Mechanism
  8. An Assessment of Erosion Wear Response of SiC Filled Epoxy Composites Reinforced with Glass and Bamboo Fibers
  9. A Global Model for Closely Intermeshing Counter-rotating Twin Screw Extruders with Flood Feeding
  10. Effects of Injection Molding Holding Pressure on the Replication of Surface Microfeatures
  11. Scaling-up a Reactive Extrusion Operation: A One-dimensional Simulation Analysis
  12. Modeling of Agglomerate Dispersion in Single Screw Extruders
  13. PPS-News
  14. PPS News
  15. Seikei Kakou Abstracts
  16. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.1035

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Improvement in the Scratch Resistance of Polymers by Roller Burnishing Process
  5. Effect of Processing Conditions on the Dispersion of Vapor Grown Carbon Fiber in a Polyamide 6 and the Crystalline Structure of their Composites by Melt Compounding
  6. Dynamics of Filler Size and Spatial Distribution in a Plasticating Single Screw Extruder – Modeling and Experimental Observations
  7. Modification of Polyester Fibers by Bactericides Using Crazing Mechanism
  8. An Assessment of Erosion Wear Response of SiC Filled Epoxy Composites Reinforced with Glass and Bamboo Fibers
  9. A Global Model for Closely Intermeshing Counter-rotating Twin Screw Extruders with Flood Feeding
  10. Effects of Injection Molding Holding Pressure on the Replication of Surface Microfeatures
  11. Scaling-up a Reactive Extrusion Operation: A One-dimensional Simulation Analysis
  12. Modeling of Agglomerate Dispersion in Single Screw Extruders
  13. PPS-News
  14. PPS News
  15. Seikei Kakou Abstracts
  16. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 3.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.1035/html?lang=de
Button zum nach oben scrollen