Startseite Polymer/Layered Silicate Nano-composites
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Polymer/Layered Silicate Nano-composites

Structure Development and Processing Operations
  • M. Okamoto
Veröffentlicht/Copyright: 10. Mai 2022
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

Polymer/layered filler nano-composites (PLFNCs) offer remarkably improved mechanical properties with low inorganic filler loading. Major developments in this field have been carried out over the last one and half decades. However, we are far from the goal of understanding the mechanisms of the enhancement effects in nanocomposites. Continued progress in nanoscale control, as well as an improved understanding of the physicochemical phenomena at the nanometer scale, has contributed to the rapid development of novel PLFNCs. We describe nano-structure development and processing operations in PLFNCs.


* Mail address: M. Okamoto, Advanced Polymeric Materials Engineering, Graduate School of Engineering, Toyota Technological Institute, 2-12-1 Hisakata, Tempaku, Nagoya 468 8511, Japan Morand Lambla Award 2005 recipient.


References

1 Ray, S. S., Okamoto, M.: Prog. Polym. Sci. 28, p. 1539 (2003)10.1016/j.progpolymsci.2003.08.002Suche in Google Scholar

2 Usuki, A., Kojima, Y., Okada, A., Fukushima, Y., Kurauchi, T., Kamigaito, O.: J. Mater. Res. 8, p. 1174 (1993)10.1557/JMR.1993.1174Suche in Google Scholar

3 Gao, F.: Materials Today 7, p. 50 (2004)10.1016/S1369-7021(04)00509-7Suche in Google Scholar

4 Usuki, A., Hasegawa, N., Kato, M.: Adv. Polym. Sci. 179, p. 135 (2005)10.1007/b104481Suche in Google Scholar

5 U.S. Patent No. 2531396 (1950) National Lead Co.Suche in Google Scholar

6 U.S. Patent No. 3084117 (1963) Union Oil Co.Suche in Google Scholar

7 Japanese Kokai Patent Application No. 109998 (1976) Unitika Ltd.Suche in Google Scholar

8 Fukushima, Y., Inagakim S.: J. Incl. Phen. 5, p. 473 (1987)10.1007/BF00664105Suche in Google Scholar

9 Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Karauchi, T., Kamigaito, O.: J. Mater. Res. 8, p. 1185 (1993)10.1557/JMR.1993.1185Suche in Google Scholar

10 Jose-Yacaman, M., Rendon, L., Arenas, J., Puche, M. C. S.: Science 273, p. 223 (1996)10.1126/science.273.5272.223Suche in Google Scholar PubMed

11 Vaia, R. A., Ishii, H., Giannelis, E. P.: Chem. Mater. 5, p. 1694 (1993)10.1021/cm00036a004Suche in Google Scholar

12 Vaia, R. A., Giannelis, E. P.: Macromolecules 30, p. 7990 (1997)10.1021/ma9514333Suche in Google Scholar

13 Vaia, R. A., Giannelis, E. P.: Macromolecules 30, p. 8000 (1997)10.1021/ma9603488Suche in Google Scholar

14 Hiroi, R., Sinha Ray, S., Okamoto, M., Shiroi, T.: Macromol. Rapid Commun. 25, p. 1359 (2004)10.1002/marc.200400173Suche in Google Scholar

15 Lagaly, G.: Clay Miner. 16, 1 (1970)Suche in Google Scholar

16 Vaia, R. A.: Teukolsky RK, Giannelis EP, Chem. Mater. 6, p. 1017 (1994)10.1021/cm00043a025Suche in Google Scholar

17 Li, Y. Q., Ishida, H.: Langmuir 19, p. 2479 (2003)10.1021/la026481cSuche in Google Scholar

18 Osman, M. A.: J. Mater. Chem. 16, p. 3007 (2006)10.1039/b606036fSuche in Google Scholar

19 Paul, D. R., Zeng, Q. H., Yu, A. B., Lu, G. O.: J. Colloid Interface Sci. 292, p. 462 (2005)10.1016/j.jcis.2005.06.024Suche in Google Scholar PubMed

20 Yoshida, O., Okamoto, M.: Macromol. Rapid Commun. 27, p. 751 (2006)10.1002/marc.200600080Suche in Google Scholar

21 Saito, T., Okamoto, M.: Macromol. Mater. Eng. in press (2006)Suche in Google Scholar

22 Totha, R., Coslanicha, A., Ferronea, M., Fermeglia, M., Pricl, S., Miertus, S., Chiellini, E.: Polymer 45, p. 8075 (2004)10.1016/j.polymer.2004.09.025Suche in Google Scholar

23 Sinsawat, A., Anderson, K. L., Vaia, R. A., Farmer, B. L.: J. Polym. Sci. Part B: Polym. Phys. 41, p. 3272 (2003)10.1002/polb.10696Suche in Google Scholar

24 Kuppa, V., Menakanit, S., Krishnamoorti, R., Manias, E.: J. Polym. Sci: Part B: Polym. Phys. 41, p. 3285 (2003)10.1002/polb.10706Suche in Google Scholar

25 Zeng, Q. H., Yu, A. B., Lu, G. Q., Standish, R. K.: Chem. Mater. 15, p. 4732 (2003)10.1021/cm0342952Suche in Google Scholar

26 Sheng, N., Boyce, M. C., Parks, D. M., Rutledge, G. C., Abes, J. I., Cohen, R. E.: Polymer 45, p. 487 (2004)10.1016/j.polymer.2003.10.100Suche in Google Scholar

27 Zerda, A. S., Caskey, T. C., Lesser, A.: Macromolecules 36, p. 1603 (2003)10.1021/ma0213450Suche in Google Scholar

28 Zhao, Q., Samulski, E. T.: Macromolecules 36, p. 6967 (2003)10.1021/ma0349682Suche in Google Scholar

29 Yang, K., Ozisik, R.: Polymer 47, p. 2849 (2006)10.1016/j.polymer.2006.02.043Suche in Google Scholar

30 Lee, E. C., Mielewski, D. F., Baird, R. J.: Polym. Eng. Sci. 44, p. 1773 (2004)10.1002/pen.20179Suche in Google Scholar

31 Zhao, L., Li, J., Guo, S., Du, Q.: Polymer 47, p. 2460 (2006)10.1016/j.polymer.2006.02.011Suche in Google Scholar

32 Shao, W., Wang, Q., Li, K.: Polym. Eng. Sci. 45, p. 451 (2005)10.1002/pen.20300Suche in Google Scholar

33 Okamoto, M., Nam, P. H., Maiti, P., Kotaka, T., Hasegawa, N., Usuki, A.: Nano Lett. 1, p. 295 (2001)10.1021/nl0100163Suche in Google Scholar

34 Okamoto, M.: Polymer/ Layered Silicate Nanocomposites, Rapra Review Report No 163. Rapra Technology, London (2003)Suche in Google Scholar

35 Maiti, P., Okamoto, M.: Macromole. Mater. Eng. 288, p. 440 (2003)10.1002/mame.200390040Suche in Google Scholar

36 Nam, P. H.: Master Thesis, Toyota Technological Institute, Nagoya, Japan (2001)Suche in Google Scholar

37 Sinha Ray, S., Okamoto, K., Okamoto, M.: Macromolecules 36, p. 2355 (2003)10.1021/ma021728ySuche in Google Scholar

38 Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., Kamigaito, O., Kaji, K.: J. Polym. Sci. Part B: Polym. Phys. 33, p. 1039 (1995)10.1002/polb.1995.090330707Suche in Google Scholar

39 Yalcin, B., Cakmak, M.: Polymer 45, p. 2691 (2004)10.1016/j.polymer.2004.01.031Suche in Google Scholar

40 Medellin-Rodriguez, F. J., Burger, C., Hsiao, B. S., Chu, B., Vaia, R. A., Phillips, S.: Polymer 42, p. 9015 (2001)10.1016/S0032-3861(01)00395-0Suche in Google Scholar

41 Lele, A., Mackley, M., Galgali, G., Ramesh, C.: J. Rheol. 46, p. 1091 (2002)10.1122/1.1498284Suche in Google Scholar

42 Bafna, A., Beaucage, G., Mirabella, F., Mehta, S.: Polymer 44, p. 1103 (2003)10.1016/S0032-3861(02)00833-9Suche in Google Scholar

43 Roe, R.: Methods of X-ray and neutron scattering in polymer science. Oxford University Press, New York (2000)Suche in Google Scholar

44 Bafna, A., Beaucage, G., Mirabella, F., Skillas, G., Sukumaran, S.: J. Polym. Sci., Part B: Polym. Phys. 39, p. 2923 (2001)10.1002/polb.10049Suche in Google Scholar

45 van Olphen, H.: An Introduction to Clay Colloid Chemistry.Wiley, New York (1977)10.1097/00010694-197807000-00013Suche in Google Scholar

46 Okamoto, M., Nam, P. H., Maiti, M., Kotaka, T., Nakayama, T., Takada, M., Ohshima, M., Usuki, A., Hasegawa, N., Okamoto, H.: Nano Lett. 1, p. 503 (2001)10.1021/nl010051+Suche in Google Scholar

47 Nam, P. H., Okamoto, M., Maiti, P., Kotaka, T., Nakayama, T., Takada, M., Ohshima, M., Hasegawa, N., Usuki, A.: Polym. Eng. Sci. 42(9), p. 1907 (2002)10.1002/pen.11083Suche in Google Scholar

48 Mitsunaga, M., Ito, Y., Okamoto, M., Sinha Ray, S., Hironaka, K.: Macromol. Mater. Eng. 288, p. 543 (2003)10.1002/mame.200300097Suche in Google Scholar

49 Ito, Y., Yamashita, M., Okamoto, M.: Macromol. Mater. Eng. 291, p. 773 (2006)10.1002/mame.200600075Suche in Google Scholar

50 Klempner, D., Frisch, K. C.: Handbook of Polymeric Foams and Foam Technology. Hanser, Munich Vienna (1991)Suche in Google Scholar

51 Colton, J. S., Suh, N. P.: Polym. Eng. Sci. 27, p. 485 (1987)10.1002/pen.760270702Suche in Google Scholar

52 Goel, K., Beckman, E. J.: Polym. Eng. Sci. 34, p. 1137 (1994) 53 Ema, Y., Ikeya, M., Okamoto, M.: Polymer 47, p. 5350 (2006)10.1002/pen.760341407Suche in Google Scholar

53 Ema, Y., Ikeya, M., Okamoto, M.: Polymer 47, p. 5350 (2006)10.1016/j.polymer.2006.05.050Suche in Google Scholar

54 Fujimoto, Y., Sinha Ray, S., Okamoto, M., Ogami, A., Ueda, K.: Macromol. Rapid Commun. 24, p. 457 (2003)10.1002/marc.200390068Suche in Google Scholar

55 Lee, L. J., Zeng, C., Cao, X., Han, X., Shen, J., Xu, G.: Composites Science and Technology 65, p. 2344 (2005)10.1016/j.compscitech.2005.06.016Suche in Google Scholar

56 Cao, X., Lee, L. J., Widya, T., Macosko, C.: Polymer 46, p. 775 (2005)10.1016/j.polymer.2004.11.028Suche in Google Scholar

57 Chandra, A., Gong, S., Turng, L.-S., Gramann, P., Cordes, H.: Polym. Eng. Sci. 45, p. 52 (2005)10.1002/pen.20229Suche in Google Scholar

58 Strauss, W., D’Souza, N. A.: J. Cellular Plastics 40, p. 229 (2004)10.1177/0021955X04043720Suche in Google Scholar

59 Fong, H., Liu, W., Wang, C. S., Vaia, R. A.: Polymer 43, p. 775 (2002)10.1016/S0032-3861(01)00665-6Suche in Google Scholar

60 Ji, Y., Li, B., Ge, S., Sokolov, J. C., Rafailovich, M. H.: Langmuir 22, p. 1321 (2006)10.1021/la0525022Suche in Google Scholar PubMed

61 Wang, M., Hsieh, A. J., Rutledge, G. C.: Polymer 46, p. 3407 (2005)10.1016/j.polymer.2005.02.099Suche in Google Scholar

Received: 2006-02-01
Accepted: 2006-07-21
Published Online: 2022-05-10

© 2006 Walter de Gruyter GmbH, Berlin/Boston, Germany

Artikel in diesem Heft

  1. Contents
  2. Rapid Communications
  3. A Novel High Flow Rate Pin for Water-assisted Injection Molding of Plastic Parts with a More Uniform Residual Wall Thickness Distribution
  4. Regular Contributed Articles
  5. Structure Property Relationships in PA 6 and PP Copolymers Blended by Single and Twin Screw Extrusion
  6. Stretchability and Properties of Biaxially Oriented Polypropylene Film
  7. Dynamic Mold Surface Temperature Control Using Induction and Heater Heating Combined with Coolant Cooling
  8. Visualization of Melt-Flow Behavior Inside the Runner in Ultra High Speed Injection Molding
  9. Effects of Cavity Conditions on Transcription Molding of Microscale Prism Patterns Using Ultra-High-Speed Injection Molding
  10. Effect of Melt and Mold Temperature on Fiber Orientation during Flow in Injection Molding of Reinforced Plastics
  11. Invited Paper
  12. Polymer/Layered Silicate Nano-composites
  13. Regular Contributed Articles
  14. Paste Extrusion of Polytetrafluoroethylene: Temperature, Blending and Processing Aid Effects
  15. Influence of Viscosity-interface Modifier Interactions on Performance and Processability of Rice Hull PE Composites
  16. Single and Multi Objective Optimization for Injection Molding Using Numerical Simulation with Surrogate Models and Genetic Algorithms
  17. A Process Classification Number for the Solidification of Crystallizing Materials
  18. Effect of Aerodynamics on Film Blowing Process
  19. Analysis of Necking Deformation Behavior in High-Speed In-line Drawing Process of PET by On-line Diameter and Velocity Measurements
  20. PPS News
  21. PPS News
  22. Seikei-Kakou Abstracts
  23. Seikei-Kakou Abstracts
Heruntergeladen am 31.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.0012/pdf?lang=de
Button zum nach oben scrollen