Nanowerkstoffe für Einsteiger

Articles in the same Issue

1. Frontmatter
2. Original Contributions
3. Study on the σ-phase precipitation of SAF2906 duplex stainless steel
4. Recovery, recrystallization and diffusion in cold-rolled Ni
5. Splitting phenomenon in martensitic transformation of X12CrMoWVNbN10-1-1 steel
6. Deformation behaviour of micro-milled cp-titanium specimens under tensile loading
7. Mechanical-thermal synthesis of NbB₂ powder from Mg/B₂O₃/Nb powder mixture
8. Influence of MgO on the phase equilibria in the Cu_xO–FeO_y–MgO –SiO₂ system in equilibrium with copper alloy – Part II: Results and discussion
9. Non-uniform sintering of yttria-stabilized zirconia powder compact
10. Effect of pH and H₂S concentration on sulfide stress corrosion cracking (SSCC) of API 2205 duplex stainless steel
11. Study of wear and corrosion behavior of cathodic plasma electrolytic deposition of zirconia– hydroxyapatite on titanium and 316L stainless steel in Ringer’s solution
12. Local structure of explosively welded titanium–stainless steel bimetal
13. Surface-induced oxidation kinetics and mechanism of oxidation of 2-D carbon fabric in different oxidative environments
14. Short Communications
15. Microstructural evaluation of ball-milled nano Al₂O₃ particulate-reinforced aluminum matrix composite powders
16. Effect of carbon nanotubes produced by using different methods on electrical and optical properties of zinc oxide–carbon nanotube composite
17. The impact of injection velocity on the defects in thick components fabricated by inserted metal injection molding
18. Book Review / Buchbesprechungen
19. Nanowerkstoffe für Einsteiger
20. Personal
21. Conferences