Startseite Preparation of high-performance soft magnetic Fe-0.8% P alloy by powder metallurgy
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Preparation of high-performance soft magnetic Fe-0.8% P alloy by powder metallurgy

  • Jidong Ma , Houan Zhang , Liang Yang , Dil Faraz Khan , Yihang Yang , Siyong Gu , Jiqiong Lian und Xiaofeng Zhang
Veröffentlicht/Copyright: 4. Dezember 2019
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 110 Heft 12

Abstract

Fe-0.8% P soft magnetic alloy was prepared by powder metallurgy. The compressibility and purity of powder were improved through collocation of powder particles and annealing treatment. The effect of sintering temperature on density, microstructure, and magnetic properties of the alloys was studied. Results show that the magnetic performance of the alloy was enhanced due to increased density because of the formation of liquid phase at low temperature and δ phase at high temperature. The optimum magnetic properties of Fe-0.8% P alloy with magnetic induction (B6000) of 1.83 T, maximum permeability of 18706 and coercive force of 30 A m−1 were obtained due to increased density (relative density 99.4%) and sintering temperatures.

Keywords: Fe-0.8% P alloy; Powder metallurgy; Density; Magnetic properties
∗Correspondence address, Jidong Ma, School of Materials Science and Engineering, Xiamen University of Technology, No. 60 Ligong Road, Xiamen 361024, P.R. China, Tel.: +86 05926291326, Fax: +86 05926291326, E-mail: ,

References

[1] H.Shokprollahi, K.Janghorban: J. Mater. Process. Technol.189 (1) (2007) 1. 10.1016/j.jmatprotec.2007.02.034Suche in Google Scholar

[2] J.A.Bas, J.A.Calero, M.J.Dougan: J. Magn. Magn. Mater.254–255 (2003) 391. 10.1016/S0304-8853(02)00934-4Suche in Google Scholar

[3] S.K.Chaurasia, P.Ujjwal, P.S.Misra, K.Chandra: Bull. Mater. Sci.35 (2012) 191. 10.1007/s12034-012-0272-zSuche in Google Scholar

[4] J.Das, K.Chandra, P.S.Misra, B.Sarma: J. Magn. Magn. Mater.320 (2008) 906. 10.1016/j.jmmm.2007.09.013Suche in Google Scholar

[5] H.H.Stadelmaier: Mater. Sci. Eng. A287 (2000) 138. 10.1016/S0921-5093(00)00766-8Suche in Google Scholar

[6] J.W.Stewart, J.A.Charles, E.R.Wallach: Mater. Sci. Technol.16 (2000) 275. 10.1179/02670830010157839Suche in Google Scholar

[7] M.C.José Azevedo, C.S.André, M.AJulian: Powder Technol.328 (2018) 329. 10.1016/j.powtec.2018.01.009Suche in Google Scholar

[8] A.Shagil, S.Mohammad, R.M.Mohd, C.S.Manish: Mater. Today: P.5 (2018) 18649. 10.1016/j.matpr.2018.06.210Suche in Google Scholar

[9] B.Weglinski, J.Kaczmar: Powder Metall.4 (1980) 210. 10.1179/pom.1980.23.4.210Suche in Google Scholar

[10] A.Chauhan, R.Vaish: Mater. Des.36 (2012) 1. 10.1016/j.matdes.2011.11.021Suche in Google Scholar

[11] S.Tajima, T.Hattori, M.Kondoh, H.Okajima, M.Sugiyama, T.Kikko: Mater. Trans.46 (2005) 1402. 10.2497/jjspm.51.542Suche in Google Scholar

[12] A.F.Zhornyak, V.E.Oliker: Powder Metall. Met. Ceram.17 (1978) 558. 10.1007/BF00791936Suche in Google Scholar

[13] L.Sun, B.Oguz, P.Kwon: Powder Technol.195 (2009) 227–234. 10.1016/j.powtec.2009.06.004Suche in Google Scholar

[14] J.Das, K.Chandra, P.S.Misra, B.Sarma: Mater. Sci. Eng. A479 (2008) 164. 10.1016/j.msea.2007.06.030Suche in Google Scholar

[15] A.Choudhury, B.Nestler, A.Telang, M.Selzer, F.Wendler: Acta Mater.58 (2010) 3815. 10.1016/j.actamat.2010.03.030Suche in Google Scholar

[16] D.C.Jiles: Acta Mater.51 (2003) 5907–5939. 10.1016/j.actamat.2003.08.011Suche in Google Scholar

[17] S.M.Lee, S.J.Kang: Acta Mater.46 (1998) 3191. 10.1016/S1359-6454(97)00489-8Suche in Google Scholar

[18] S.Ii, K.Hirayama, K.Matsunaga, H.Fujiib, S.Tsurekawa: Scr. Mater.68 (2013) 253. 10.1016/j.scriptamat.2012.10.028Suche in Google Scholar

[19] K.Y.He: J. Appl. Phys.110 (2012) 043925–1. 10.1063/1.3622583Suche in Google Scholar

[20] I.Gilbert, S.Bull, T.Evans, A.Jack, D.Stephenson, A.De: J. Mater. Sci.39 (2004) 457. 10.1023/B:JMSC.0000011498.90378.7eSuche in Google Scholar

[21] G.L.Zhao, C.Wu, M.Yan: J. Alloys Compd.710 (2017) 138. 10.1016/j.jallcom.2017.03.229Suche in Google Scholar

Received: 2019-04-23
Accepted: 2019-07-18
Published Online: 2019-12-04
Published in Print: 2019-12-10

© 2019, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial
  5. Original Contributions
  6. Effect of Cr and Ni on the microstructural evolution in Co–Re–Cr–Ni alloys
  7. Review
  8. Dynamic mechanical behavior of magnesium alloys: a review
  9. Original Contributions
  10. Composition dependence of the glass-forming ability and soft magnetic properties of Fe-rich Fe–Nb–B ternary alloys
  11. Deposition temperature dependence on the bonding structure and mechanical properties of laser ablated boron-carbonitride thin films
  12. Preparation of high-performance soft magnetic Fe-0.8% P alloy by powder metallurgy
  13. Preparations of superhydrophobic surfaces using the one-step spin coating method and characterizations of their anti-icing behavior
  14. Atomistic study of fracture behavior of metallic glass fiber reinforced metal-matrix nanocomposite during bending creep deformation process
  15. Development and characterization of eutectic Sn-Zn, Sn-Ag, Sn-Bi and Sn-Cu solder alloys
  16. Effect of current density and deposition time on the corrosion and wear resistance of Ni–W alloy coatings
  17. Short Communications
  18. Synthesis and characterization of layered perovskite cathode materials for SOFC application
  19. People
  20. Professor Elazar Gutmanas (28.10.1939 – 26.10.2019)
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.111849
Schlagwörter für diesen Artikel
Fe-0.8% P alloy; Powder metallurgy; Density; Magnetic properties

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial
  5. Original Contributions
  6. Effect of Cr and Ni on the microstructural evolution in Co–Re–Cr–Ni alloys
  7. Review
  8. Dynamic mechanical behavior of magnesium alloys: a review
  9. Original Contributions
  10. Composition dependence of the glass-forming ability and soft magnetic properties of Fe-rich Fe–Nb–B ternary alloys
  11. Deposition temperature dependence on the bonding structure and mechanical properties of laser ablated boron-carbonitride thin films
  12. Preparation of high-performance soft magnetic Fe-0.8% P alloy by powder metallurgy
  13. Preparations of superhydrophobic surfaces using the one-step spin coating method and characterizations of their anti-icing behavior
  14. Atomistic study of fracture behavior of metallic glass fiber reinforced metal-matrix nanocomposite during bending creep deformation process
  15. Development and characterization of eutectic Sn-Zn, Sn-Ag, Sn-Bi and Sn-Cu solder alloys
  16. Effect of current density and deposition time on the corrosion and wear resistance of Ni–W alloy coatings
  17. Short Communications
  18. Synthesis and characterization of layered perovskite cathode materials for SOFC application
  19. People
  20. Professor Elazar Gutmanas (28.10.1939 – 26.10.2019)
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111849/pdf?lang=de
Button zum nach oben scrollen