Startseite Synthesis and evaluation of a collagen–brushite cement as a drug delivery system
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Synthesis and evaluation of a collagen–brushite cement as a drug delivery system

Paper presented at the “VII International Congress of Biomaterials, BIOMAT'2018”, 14–16 March 2018, Havana, Cuba
  • Claudia Morilla , Yailene M. Lima , Gastón Fuentes und Amisel Almirall
Veröffentlicht/Copyright: 3. April 2019
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 110 Heft 4

Abstract

Calcium phosphate cements are known for their biocompatibility and bioactivity, which has led to a significant increase in their use. They have the advantage of being prepared as a malleable paste that sets in a few minutes and can be easily applied in bone defects. In this research work, 6 brushite cement formulations were prepared and the effect of collagen addition and the release of tetracycline were evaluated. All cements gave a malleable paste that set in 2 or 3 min, resulting in a material with pores of 5–20 μm. The cements showed compression resistance values between 0.8 and 1.7 MPa, and the addition of collagen was the most influential factor in the increase of this property. Up to 40 % of the drug was released after 7 days and the effectiveness of its antimicrobial activity was confirmed.

Keywords: Calcium phosphate cements; Brushite; Calcium phosphates; Collagen; Drug delivery system
∗Correspondence address, Dra. Amisel Almirall La Serna, Centro de Biomateriales, Universidad de La Habana, Avenida Universidad e/G y Ronda, Vedado, Plaza, La Habana 10400, Cuba, Tel: +53 7878 0687, e-mail: , Web: www.biomat.uh.cu

References

[1] S.V.Dorozhkin: Materials6 (2013) 3840. PMid:28788309; 10.3390/ma6093840Suche in Google Scholar

[2] S.V.Dorozhkin: J. Funct. Biomater4 (2013) 209. PMid:24956191; 10.3390/jfb4040209Suche in Google Scholar

[3] J.Zhang, W.Liu, V.Schnitzler, F.Tancret, J.-M.Bouler: Acta Biomater10 (2014) 1035. 10.1016/j.actbio.2013.11.001Suche in Google Scholar

[4] F.Tamimi, Z.Sheikh, J.Barralet: Acta Biomater8. (2012) 474. PMid:21856456; 10.1016/j.actbio.2011.08.005Suche in Google Scholar

[5] Z.Sheikh: Materials8 (2015) 7913. PMid:28793687; 10.3390/ma8115430Suche in Google Scholar

[6] C.-L.Ko, J.-C.Chen, C.-C.Hung, J.-C.Wang, Y.-C.Tien, W.-C.Chen: Mater Sci Eng C39 (2014) 40. PMid:24863195; 10.1016/j.msec.2014.02.033Suche in Google Scholar

[7] D.L.Alge, W.S.Goebel, T.-M.Gabriel Chu: J. Biomed. Mater. Res. Part B100 (2012) 595. PMid:22323239; 10.1002/jbm.b.31938Suche in Google Scholar

[8] M.P.Ginebra, C.Canal, M.Espanol, D.Pastorino, E.B.Montufar: Adv. Drug Deliver. Rev.64 (2012) 1090. PMid:22310160; 10.1016/j.addr.2012.01.008Suche in Google Scholar

[9] E.Vorndran, M.Geffers, A.Ewald, M.Lemm, B.Nies, U.Gbureck: Acta Biomater.9 (2013) 9558. PMid:23954526; 10.1016/j.actbio.2013.08.009Suche in Google Scholar

[10] A.A.Mirtchi, J.Lemaitre, N.Terao: Biomaterials10 (1989) 475. 10.1016/0142-9612(89)90089-6Suche in Google Scholar

[11] R.O’Neill, H.McCarthy, E.Montufar, M.-P.Ginebra, D.Wilson, A.Lennon, N.Dunne: Acta Biomater. (2016) 3. 10.1016/j.actbio.2016.11.019Suche in Google Scholar

[12] J.Engstrandn, C.Persson, H.Engqvist: J. Mech. Behav. Biomed. Mater.29 (2014) 81. PMid:24064324; 10.1016/j.jmbbm.2013.08.024Suche in Google Scholar

[13] R.M.O’Hara, J.F.Orr, F.J.Buchanan, R.K.Wilcox, D.C.Barton, N.J.Dunne: Acta Biomater.8 (2012) 4043. PMid:22800604; 10.1016/j.actbio.2012.07.003Suche in Google Scholar

[14] Y.J.Hong, J.-S.Chun, W.-K.Lee: Colloid Surf. B83 (2011) 245. PMid:21177080; 10.1016/j.colsurfb.2010.11.028Suche in Google Scholar

[15] M.C.Bottino, E.A.Münchow, M.T.P.Albuquerque, K.Kamocki, R.Shahi, R.L.Gregory, T.-M.G.Chu, D.Pankajakshan: Biomed. Mater. Res. B.105 (2017) 2085. PMid:27405272; 10.1002/jbm.b.33743Suche in Google Scholar

[16] R.G.Shahi, M.T.P.Albuquerque, E.A.Münchow, S.B.Blanchard, R.L.Gregory, M.C.Bottino: Odontology105 (2017) 354. PMid:27585669; 10.1007/s10266-016-0268-zSuche in Google Scholar

[17] R.García Carrodeguas, L.Morejón Alonso, J.A.D.García-Menocal, L.Morejón Alonso, M.P.Ginebra Molins, S.Martínez Manent, J. GilMur, J.Toledo Pérez, J.A.Planell Estany: Mater. Res.6 (2003) 395. 10.1590/S1516-14392003000300014Suche in Google Scholar

[18] N.A.Peppas, B.Narasimhan: Controlled Release190 (2014) 75. PMid:24998939; 10.1016/j.jconrel.2014.06.041Suche in Google Scholar

[19] A.A.Mirtchi, J.Lemaître, E.Hunting: Biomaterials10 (1989) 634. 10.1016/0142-9612(89)90120-8Suche in Google Scholar

[20] J.E.Barralet, L.M.Grover, U.Gbureck: Biomaterials25 (2004) 2197. PMid:14741635; 10.1016/j.biomaterials.2003.09.085Suche in Google Scholar PubMed

[21] A. CuneytTas, S.B.Bhaduri. Preparation of Brushite Powders and their in Vitro Conversion to Nanoapatites. In Bioceramics: Materials and Applications V. John Wiley & Sons (2012).Suche in Google Scholar

[22] F.J.Richards: J. Exp. Bot.10 (1959) 290. 10.1093/jxb/10.2.290Suche in Google Scholar

[23] E.Adams: Int. J. Pharmaceut.240 (2002) 37. 10.1016/S0378-5173(02)00127-8Suche in Google Scholar

[24] E.Vallés, D.Durando, I.Katime, E.Mendizábal, J.E.Puig: Polym. Bull.44 (2000) 109. 10.1007/s002890050580Suche in Google Scholar

Received: 2018-05-30
Accepted: 2018-10-26
Published Online: 2019-04-03
Published in Print: 2018-04-12

© 2019, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. “VII International Congress of Biomaterials, BIOMAT' 2018” (14–16 March 2018, Havana, Cuba): from medical devices to regenerative medicine
  5. Original Contributions
  6. Microstructural evolution and strain hardening behavior of AISI 316L type austenitic stainless steel
  7. The microstructure and three-point bending behavior of Ni–Co/WC composite cladding coating
  8. Effects of TiN coating on the high-cycle-fatigue and very-high-cycle-fatigue properties of Ti-6Al-4V alloy
  9. Phase equilibria of the Dy–Nb–Si ternary system at 1 273 K
  10. Synthesis of SnO/SnO2 microsphere photocatalysts by ultrasonic reaction
  11. Exploring the use of silica sands and calcite from natural deposits to prepare bioactive glasses
  12. Bioactivity and mechanical properties of scaffolds based on calcium aluminate and bioactive glass
  13. Effect of heat treatment on apatite coatings deposited on pre-calcified titanium substrates
  14. Calcium silicate-poly(n-butyl-2-cyanoacrylate) nanocomposite for bone tissue adhesion
  15. Synthesis and evaluation of a collagen–brushite cement as a drug delivery system
  16. Short Communications
  17. Biomedical porous Ti-16Nb-10Zr-(0–15)Ta alloys
  18. Influence of Zr addition on the corrosion behavior of biomedical PIM Ti-16Nb alloy in SBF
  19. DGM News
  20. DGM News
https://doi.org/10.3139/146.111751
Schlagwörter für diesen Artikel
Calcium phosphate cements; Brushite; Calcium phosphates; Collagen; Drug delivery system

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. “VII International Congress of Biomaterials, BIOMAT' 2018” (14–16 March 2018, Havana, Cuba): from medical devices to regenerative medicine
  5. Original Contributions
  6. Microstructural evolution and strain hardening behavior of AISI 316L type austenitic stainless steel
  7. The microstructure and three-point bending behavior of Ni–Co/WC composite cladding coating
  8. Effects of TiN coating on the high-cycle-fatigue and very-high-cycle-fatigue properties of Ti-6Al-4V alloy
  9. Phase equilibria of the Dy–Nb–Si ternary system at 1 273 K
  10. Synthesis of SnO/SnO2 microsphere photocatalysts by ultrasonic reaction
  11. Exploring the use of silica sands and calcite from natural deposits to prepare bioactive glasses
  12. Bioactivity and mechanical properties of scaffolds based on calcium aluminate and bioactive glass
  13. Effect of heat treatment on apatite coatings deposited on pre-calcified titanium substrates
  14. Calcium silicate-poly(n-butyl-2-cyanoacrylate) nanocomposite for bone tissue adhesion
  15. Synthesis and evaluation of a collagen–brushite cement as a drug delivery system
  16. Short Communications
  17. Biomedical porous Ti-16Nb-10Zr-(0–15)Ta alloys
  18. Influence of Zr addition on the corrosion behavior of biomedical PIM Ti-16Nb alloy in SBF
  19. DGM News
  20. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 15.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111751/pdf?lang=de
Button zum nach oben scrollen