Exploring the use of silica sands and calcite from natural deposits to prepare bioactive glasses
-
Lizette Morejón Alonso
, José Ángel Delgado García-Menocal , Maite García-Vallés , Salvador Martínez Manent , Elizabeth R. Balmayor und Martijn van Griensven
Abstract
Nowadays bioactive glasses represent one of the most successful bioceramics used for bone tissue restorations. In this work, three types of silica sands (White, Yellow and Gray Sands) and calcite from Cuban natural deposits were employed to synthesize glasses from the system SiO2–CaO–Na2O. The ions released from glasses were evaluated through in vitro tests in Tris-HCl and in simulated body fluids. All sands had purity around 99.2% of SiO2 and contained traces (ppm) of Zr, Cr, Ba, Ce and Sr ions, while calcite raw material had traces of Sr, Cr, Zr, Ce and Zn. All glasses induced a pH change in Tris-HCl from 7.4 to 9 after 24 h; they had similar ion-release behavior in the in vitro solutions tested and showed a significant bioactive performance after 5 h. This work illustrates the potentialities of the use of natural resources to develop medical products when recognized trademark materials are not available.
References
[1] M.L.Wolford, K.Palso, A.Bercovitz: NCHS Data Brief, 186 (2015) 1.Suche in Google Scholar
[2] E.Hernlund, A.Svedbom, M.Ivergård, J.Compston, C.Cooper, J.Stenmark, E.McCloskey, B.Jönsson, J.Kanis: Arch. Osteoporos.8: 1–2 (2013) 1. 10.1007/s11657-013-0136-1Suche in Google Scholar
[3] T.Vos, A.D.Flaxman, M.Naghavi: The Lancet380 (2012) 2163. 10.1016/S0140-6736(12)61729-2Suche in Google Scholar
[4] W.Liang, T.Chikritzhs: J. Aging Res. (2016) 1. 10.1155/2016/5071438Suche in Google Scholar PubMed PubMed Central
[5] U.S. Department of Health and Human Services. Bone Health and Osteoporosis: A Report of the Surgeon General. Rockville, MD: U.S. Department of Health and Human Services, Office of the Surgeon General, 2004. 20945569Suche in Google Scholar
[6] J.J.Body, I.P.Acklin, O.Gunther, G.Hechmati, J.Pereira, N.Maniadakis, E.Terpos, J.Finek, R. vonMoos, S.Talbot, H.Sleeboom: J. Bone Oncol.5 (2016) 185. PMid:28008381; 10.1016/j.jbo.2016.07.003Suche in Google Scholar PubMed PubMed Central
[7] D.Weycker, X.Li, R.Barron, R.Bornheimer, D.Chandler: Bone Reports5 (2016) 186. PMid:28580386; 10.1016/j.bonr.2016.07.005Suche in Google Scholar PubMed PubMed Central
[8] J.Félix, V.Andreozzi, M.Soares, P.Borrego, H.Gervásio, A.Moreira, L.Costa, F.Marcelo, F.Peralta, I.Furtado, F.Pina, C.Albuquerque, A.Santos, J.L.Passos-Coelho: Value Health14 (2011) 499. PMid:21669375; 10.1016/j.jval.2010.11.014Suche in Google Scholar PubMed
[9] L.L.Hench, J Mater. Sci-Mater M17 (2006) 967. PMid:17122907; 10.1007/s10856-006-0432-zSuche in Google Scholar PubMed
[10] J.R.Jones, D.S.Brauer, L.Hupa, D.C.Greenspan: Int. J. Appl. Glass Sci.7 (2016). 10.1111/ijag.12252Suche in Google Scholar
[11] L.L.Hench, R.J.Splinter, W.C.Allen, T.K.Greenlee: J. Biomed. Mater. Res.2 (1971) 117. 10.1002/jbm.820050611Suche in Google Scholar
[12] L.L.Hench: J. Am. Ceram. Soc.74 (1991) 1487. 10.1111/j.1151-2916.1991.tb07132.xSuche in Google Scholar
[13] L. L.Hench, in L. L.Hench, J. R.Jones, M. B.Fenn (Eds.), New Materials and Technologies for Healthcare, World Scientific, Singapore (2011) 25. 10.1142/9781848165595_0003Suche in Google Scholar
[14] L.A.Adams, E.R.Essien, A.T.Adesalu, M.L.Julius: J. Sci. Adv. Mater. Dev. (2017),. 10.1016/j.jsamd.2017.09.002Suche in Google Scholar
[15] L.A.Adams, E.R.Essien: Am. J. Biomed. Sci.7 (2015) 218. 10.5099/aj150400218Suche in Google Scholar
[16] F.Naghizadeh, M.R.A.Kadir, A.Doostmohammadi, F.Roozbahani, N.Iqbal, M.M.Taheri, S.V.Naveen, T.Kamarul: J. Non-Cryst. Solids427 (2015) 54. 10.1016/j.jnoncrysol.2015.07.017Suche in Google Scholar
[17] S.Kumar: Bachelor of Technology thesis, Sol-gel synthesis and in vitro characterization of bioactive glass ceramics using rice husk ash waste material. National Institute of Technology, Rourkela, Orissa (2009).Suche in Google Scholar
[18] D.Correa, J.A.Delgado, L.Morejón, N.Brizuela, V.C.Sousa, L.A.dos Santos, Proc. 58° Ceramic Brazilian Congress, Bento Gonçalves, RS, Brazil (2014) 2522.Suche in Google Scholar
[19] https://www.ecured.cu/Yacimiento_de_arena_s%C3%ADlice_Santa_Teresa.Suche in Google Scholar
[20] C.M.Salcines: Tecnología de fundición, Vol 1, Pueblo y Educación, La Habana (1985).Suche in Google Scholar
[21] ISO 10993-14: 2001. Biological evaluation of medical devices. Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001).Suche in Google Scholar
[22] T.Kokubo, H.Takadama: Biomaterials27 (2006) 2907. PMid:16448693; 10.1016/j.biomaterials.2006.01.017Suche in Google Scholar PubMed
[23] ASTM F1538-03 (2017), Standard specification for Glass and Glass Ceramic Biomaterials for Implantation, ASTM International, West Conshohocken, PA, 2017.Suche in Google Scholar
[24] Munasir, Triwikantoro, M.Zainuri, Darminto: Mater. Sci.-Poland33 (2015) 47. 10.1515/msp-2015-0008Suche in Google Scholar
[25] M.D.O’Donnell. Acta Biomater.7 (2011) 2264. PMid:21256253; 10.1016/j.actbio.2011.01.021Suche in Google Scholar PubMed
[26] R.G.Hill, D.S.Brauer: Acta Biomater.7 (2011) 3601–3605. PMid:21723965; 10.1016/j.actbio.2011.06.023Suche in Google Scholar PubMed
[27] R.Brückner, M.Tylkowski, L.Hupa, D.S.Brauer: J. Mater. Chem. B4 (2016) 312. 10.1039/C5TB02426ASuche in Google Scholar PubMed
[28] M. ValletRegi: J. Chem Soc., Dalton Trans., (2001) 97. 10.1039/b007852mSuche in Google Scholar
[29] M.Navarro, M.P.Ginebra, J.Clement, S.Martínez, G.Avila, J.A.Planell: J. Am. Ceram. Soc.86 (2003) 1345. 10.1111/j.1151-2916.2003.tb03474.xSuche in Google Scholar
[30] U.Gross, V.Strunz: J. Biomed. Mater. Res.14 (1980) 607. 10.1002/jbm.820140507Suche in Google Scholar
[31] O.H.Anderson, K.H.Karlsson, K.Kanganiemi: J. Non-Cryst. Solids119 (1990) 290. 10.1016/0022-3093(90)90301-2Suche in Google Scholar
[32] A.L.Mormul, C.A.Leyva, E.Leyva, R.S.Almenares: Ciencias Holguín, AñoXVI (2010) 1.Suche in Google Scholar
© 2019, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- “VII International Congress of Biomaterials, BIOMAT' 2018” (14–16 March 2018, Havana, Cuba): from medical devices to regenerative medicine
- Original Contributions
- Microstructural evolution and strain hardening behavior of AISI 316L type austenitic stainless steel
- The microstructure and three-point bending behavior of Ni–Co/WC composite cladding coating
- Effects of TiN coating on the high-cycle-fatigue and very-high-cycle-fatigue properties of Ti-6Al-4V alloy
- Phase equilibria of the Dy–Nb–Si ternary system at 1 273 K
- Synthesis of SnO/SnO2 microsphere photocatalysts by ultrasonic reaction
- Exploring the use of silica sands and calcite from natural deposits to prepare bioactive glasses
- Bioactivity and mechanical properties of scaffolds based on calcium aluminate and bioactive glass
- Effect of heat treatment on apatite coatings deposited on pre-calcified titanium substrates
- Calcium silicate-poly(n-butyl-2-cyanoacrylate) nanocomposite for bone tissue adhesion
- Synthesis and evaluation of a collagen–brushite cement as a drug delivery system
- Short Communications
- Biomedical porous Ti-16Nb-10Zr-(0–15)Ta alloys
- Influence of Zr addition on the corrosion behavior of biomedical PIM Ti-16Nb alloy in SBF
- DGM News
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- “VII International Congress of Biomaterials, BIOMAT' 2018” (14–16 March 2018, Havana, Cuba): from medical devices to regenerative medicine
- Original Contributions
- Microstructural evolution and strain hardening behavior of AISI 316L type austenitic stainless steel
- The microstructure and three-point bending behavior of Ni–Co/WC composite cladding coating
- Effects of TiN coating on the high-cycle-fatigue and very-high-cycle-fatigue properties of Ti-6Al-4V alloy
- Phase equilibria of the Dy–Nb–Si ternary system at 1 273 K
- Synthesis of SnO/SnO2 microsphere photocatalysts by ultrasonic reaction
- Exploring the use of silica sands and calcite from natural deposits to prepare bioactive glasses
- Bioactivity and mechanical properties of scaffolds based on calcium aluminate and bioactive glass
- Effect of heat treatment on apatite coatings deposited on pre-calcified titanium substrates
- Calcium silicate-poly(n-butyl-2-cyanoacrylate) nanocomposite for bone tissue adhesion
- Synthesis and evaluation of a collagen–brushite cement as a drug delivery system
- Short Communications
- Biomedical porous Ti-16Nb-10Zr-(0–15)Ta alloys
- Influence of Zr addition on the corrosion behavior of biomedical PIM Ti-16Nb alloy in SBF
- DGM News
- DGM News