Startseite Technik Reactive wetting of Ti-6Al-4V alloy by molten Al 4043 and 6061 alloys at 600–700°C
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Reactive wetting of Ti-6Al-4V alloy by molten Al 4043 and 6061 alloys at 600–700°C

  • Qiaoli Lin , Fuxiang Li , Peng Jin und Weiyuan Yu
Veröffentlicht/Copyright: 30. Mai 2017
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 108 Heft 6

Abstract

Wetting of Ti-6Al-4V alloy by two industrial grade Al alloys (i. e., Al 6061 and 4043 alloys) was studied using the sessile drop method at 600–700 °C under high vacuum. Al/Ti-6Al-4V is a typical reactive wetting system with good final wettability accompanied by the formation of precursor film which is actually an extended reaction layer. The formation mechanism for the precursor film is “subcutaneous infiltration”. The small amount of alloying element Si in the alloys can cause significant segregation at the liquid/solid interface which satisfies the thermodynamic condition. The wetting behavior can be described by the classic reaction product control models, and Ti7Al5Si12 decomposition and Al3Ti formation correspond to the two spreading stages. The small difference in alloying elements in Al 6061 and 4043 resulted in distinctly different interface structures, formation of precursor film and spreading dynamics, especially for the Si segregation at the interface.

Keywords: Coating; Interface; Wettability
*Correspondence address, Associate Professor Qiaoli Lin, Department of Materials Science & Engineering, Lanzhou University of Technology, No. 287 Langongping Road, Lanzhou 730050, P. R. China, Tel.: +86931 2973529, Fax: +86931 2755806, E-mail: , Web: http://cailiao.lut.cn/w/

References

[1] H.L.Du, P.K.Datta, D.B.Lewis, J.S.Burnell-Gray: Corros. Sci.36 (1994) 631. 10.1016/0010-938X(94)90069-8Suche in Google Scholar

[2] C.Leyens, M.Peters, W.A.Kaysser: Surf. Coat. Technol. 94 –95 (1997) 34. 10.1016/S0257-8972(97)00472-6Suche in Google Scholar

[3] G.D.Hao, Z.H.Jiang, Z.P.Yao, H.Z.Xian, Y.L.Jiang: Key Eng. Mater. 336 –338 (2007) 2481. 10.4028/www.scientific.net/KEM.336-338.2481Suche in Google Scholar

[4] I.C.Hsu, S.K.Wu, R.Y.Lin: Mater. Chem. Phys.49 (1997) 184. 10.1016/S0254-0584(97)01892-0Suche in Google Scholar

[5] U.Hornauer, E.Richter, E.Wieser, W.Möller, G.Schumacher, C.Lang, M.Schütze: Nucl. Instrum. Sect. Methods B Phys. Res.148 (1999) 858. 10.1016/S0168-583X(98)00820-9Suche in Google Scholar

[6] Z.D.Xiang, S.R.Rose, P.K.Datta: Surf. Coat. Technol.161 (2002) 286. 10.1016/S0921-5093(03)00108-4Suche in Google Scholar

[7] N.Eustathopoulos, M.G.Nicholas, B.Drevet: Wettability at high temperatures, Elsevier, Oxford (1999).Suche in Google Scholar

[8] D.M.Liu, Z.W.Zhu, Z.K.Li, H.M.Fu, H.Li, A.M.Wang, H.W.Zhang, H.F.Zhang, Z.Q.Hu: Mater. Sci. Forum849 (2016) 385. 10.4028/www.scientific.net/MSF.849.385Suche in Google Scholar

[9] C.C.Liu, C.L.Ou, R.K.Shiue: J. Mater. Sci.37 (2002) 2225. 10.1023/A:1015356930476Suche in Google Scholar

[10] P.Shen, Q.Lin, Q.C.Jiang, H.Fujii, K.Nogi: J. Mater. Res.24 (2009) 2420. 10.1557/jmr.2009.0260Suche in Google Scholar

[11] A.Xian: J. Mater. Sci.28 (1993) 1019. 10.1007/BF00400889Suche in Google Scholar

[12] P.G.de Gennes: Rev. Mod. Phys.57 (1985) 827. 10.1103/RevModPhys.57.827Suche in Google Scholar

[13] G.L.J.Bailey, H.C.Watkins: J. Inst. Metals80 (1951) 57.Suche in Google Scholar

[14] Z.K.Li, G.F.Ma, H.M.Fu, P.F.Sha, B.Zhang, Z.W.Zhu, A.M.Wang, H.Li, H.W.Zhang, H.F.Zhang, Z.Q.Hu: Mater. Lett.98 (2013) 98. 10.1016/j.matlet.2013.02.005Suche in Google Scholar

[15] E.B.WebbIII, G.S.Grest, D.R.Heine: Phys. Rev. Lett.91 (2003) 236102. PMid:14683202; 10.1103/PhysRevLett.91.236102Suche in Google Scholar

[16] Q.Lin, F.Qiu, R.Sui: Thin Solid Films558 (2014) 231. 10.1016/j.tsf.2014.02.074Suche in Google Scholar

[17] H.Zhuang, E.Lugscheider: High temperature brazing, National defense industry press, Beijing (1989).Suche in Google Scholar

[18] P.Protsenko, A.Terlain, V.Traskine, N.Eustathopoulos: Scr. Mater.45 (2001) 1439. 10.1016/S1359-6462(01)01181-2Suche in Google Scholar

[19] P.Perrot, in: G.Effenberg, S.Ilyenko (Eds.), Light Metal Systems, Part 4: Selected systems from Al-Si-Ti to Ni-Si-Ti, Springer-Verlag, Berlin-Heidelberg, Germany (2006). 10.1007/11008514_2Suche in Google Scholar

[20] R.F.Zhang, S.H.Sheng, B.X.Liu: Chem. Phys. Lett.442 (2007) 511. 10.1016/j.cplett.2007.06.031Suche in Google Scholar

[21] S.H.Chen, L.Q.Li, Y.B.Chen: Mater. Sci. Technol.26 (2010) 230. 10.1179/174328409X399056Suche in Google Scholar

Received: 2016-10-18
Accepted: 2017-02-20
Published Online: 2017-05-30
Published in Print: 2017-06-12

© 2017, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. The thermodynamic stability induced by solute co-segregation in nanocrystalline ternary alloys
  5. A general approach on the modelling of incubation in ferrite transformation using non-isothermal kinetics data for 22MnB5 steel
  6. Effect of aging on microstructure and mechanical properties of ZnAl15Cu1 alloy for wrought applications
  7. Deformation behavior and texture randomization of Mg–Zn–Gd alloys reinforced with icosahedral quasicrystal
  8. Atomic mobility in liquid and fcc Al–Si–Mg–RE (RE = Ce, Sc) alloys and its application to the simulation of solidification processes in RE-containing A357 alloys
  9. Reactive wetting of Ti-6Al-4V alloy by molten Al 4043 and 6061 alloys at 600–700°C
  10. Laser surface treatment of S235JRC carbon steel with Co2B nanocrystals
  11. Research and analysis of stress distribution in multilayers of coated tools
  12. Observations of freeze layer formation during heat balance shifts in cryolite-based smelting bath
  13. Synthesis and thermo-mechanical investigation of macrodiol-based shape memory polyurethane elastomers
  14. DGM News
  15. DGM News
https://doi.org/10.3139/146.111499
Schlagwörter für diesen Artikel
Coating; Interface; Wettability

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. The thermodynamic stability induced by solute co-segregation in nanocrystalline ternary alloys
  5. A general approach on the modelling of incubation in ferrite transformation using non-isothermal kinetics data for 22MnB5 steel
  6. Effect of aging on microstructure and mechanical properties of ZnAl15Cu1 alloy for wrought applications
  7. Deformation behavior and texture randomization of Mg–Zn–Gd alloys reinforced with icosahedral quasicrystal
  8. Atomic mobility in liquid and fcc Al–Si–Mg–RE (RE = Ce, Sc) alloys and its application to the simulation of solidification processes in RE-containing A357 alloys
  9. Reactive wetting of Ti-6Al-4V alloy by molten Al 4043 and 6061 alloys at 600–700°C
  10. Laser surface treatment of S235JRC carbon steel with Co2B nanocrystals
  11. Research and analysis of stress distribution in multilayers of coated tools
  12. Observations of freeze layer formation during heat balance shifts in cryolite-based smelting bath
  13. Synthesis and thermo-mechanical investigation of macrodiol-based shape memory polyurethane elastomers
  14. DGM News
  15. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2026 De Gruyter Brill
Heruntergeladen am 3.1.2026 von https://www.degruyterbrill.com/document/doi/10.3139/146.111499/pdf?lang=de
Button zum nach oben scrollen