Mechanical properties of the novel B2-type binary Zr – Co alloys containing the B33 phase
-
Peiyou Li
Abstract
In binary Zr – Co alloys, the B2 parent phase to B33 phase ratio can be defined by defining the atomic percent ratio of Zr to Co. The B2-type alloys Zr48Co52, Zr46Co54, Zr44Co56 and Zr42Co58 were fabricated by rapid solidification techniques, with the B33 phase being present at room temperature. The experimental results showed that the presence of the B33 phase yielded higher strength, elongation and toughness in the B2-type Z50Co50 alloy. Consequently, the appropriate combination of the B2 and B33 phases enhances both strength and ductility. This combination of high strength and ductility of the novel B2-type binary Zr – Co alloys containing the B33 phase means they may be considered as novel engineering materials.
References
[1] M.Matsuda, Y.Iwamoto, Y.Morizono, S.Tsurekawa, K.Takashima, M.Nishid: Intermetallics36 (2013) 45. 10.1016/j.intermet.2013.01.008Search in Google Scholar
[2] S.Pauly, K.Kosiba, P.Gargarella, B.Escher, K.K.Song, G.Wang, U.Kühn, J.Eckert: J. Mater. Sci. Technol.30 (2014) 584. 10.1016/j.jmst.2014.05.006Search in Google Scholar
[3] V.V.Romaka, L.Romaka, P.Rogl, YuStadnyk, N.Melnychenko, R.Korzh, Z.Duriagina, A.Horyn: J. Alloys Compd.585 (2014) 448. 10.1016/j.jallcom.2013.09.097Search in Google Scholar
[4] M.Palit, J. AroutChelvane, H.Basumatary, D. AravindhaBabu, S.V.Kamat: J. Alloys Compd.644 (2015) 7. 10.1016/j.jallcom.2015.04.156Search in Google Scholar
[5] T.Wada, F.Qin, X.Wang, M.Yoshimura, A.Inoue, N.Sugiyama, R.Ito, N.Matsushita: J. Mater. Res.24 (2009) 2941. 10.1557/jmr.2009.0348Search in Google Scholar
[6] T.Yamaguchi, Y.Kaneno, T.Takasugi: Scr. Mater.52 (2005) 39. 10.1016/j.scriptamat.2004.09.002Search in Google Scholar
[7] C.J.Li, J.Tan, G.Wang, J.Bednarčík, X.K.Zhu, Y.Zhang, M.Stoica, U.Kühn, J.Eckert: Scr. Mater.68 (2013) 897. 10.1016/j.scriptamat.2013.02.029Search in Google Scholar
[8] M.Matsuda, T.Nishimoto, Y.Morizono, S.Tsurekawa, M.Nishida: Intermetallics19 (2011) 894. 10.1016/j.intermet.2011.02.006Search in Google Scholar
[9] M.Matsuda, T.Nishimoto, K.Matsunaga, Y.Morizono, S.Tsurekawa, M.Nishida: J. Mater. Sci.46 (2011) 4221. 10.1007/s10853-010-5236-3Search in Google Scholar
[10] Y.Kaneno, K.Asao, M.Yoshida, H.Tsuda, T.Takasugi: J. Alloys Compd.456 (2008) 125. 10.1016/j.jallcom.2007.02.067Search in Google Scholar
© 2016, Carl Hanser Verlag, München
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Phage-assisted assembly of organic–inorganic hybrid bilayers
- 3D FEM modelling for stress simulation and experimental investigation of dual-gradient coating using PVD
- Phase-field simulation of liquid phase migration in the WC–Co system during liquid phase sintering
- Investigation of texture, microstructure, and mechanical properties of a magnesium–lanthanum alloy after thermo-mechanical processing
- A combination of high electrical conductivity and mechanical strength in AA1070 commercially pure aluminum wires fabricated by KoBo extrusion
- In-situ formation of MgO whiskers and CNTs and their influence on the mechanical properties of low-carbon MgO–C refractory composites
- Experimental investigation of the Zn–Co–Sb system at 450°C
- Hydrogen storage thermodynamics and kinetics of LaMg11Ni + x wt.% Ni (x = 100, 200) alloys synthesized by mechanical milling
- Effect of high magnetic field on carbide precipitation in W6Mo5Cr4V3 high-speed steel during low-temperature tempering
- Dependency of structure, mechanical and electrical properties on rotating magnetic field in the Bi–Sn–Ag ternary eutectic alloy
- Large carbide dissolution in GCr15 continuously cast billet core
- Short Communications
- Synthesis and capacitive properties of V(S2)2 nanobelts on graphene sheets
- Mechanical properties of the novel B2-type binary Zr – Co alloys containing the B33 phase
- People
- Prof. Dr. Robert Danzer on the occasion of his 65th birthday
- DGM News
- DGM News
Articles in the same Issue
- Contents
- Contents
- Original Contributions
- Phage-assisted assembly of organic–inorganic hybrid bilayers
- 3D FEM modelling for stress simulation and experimental investigation of dual-gradient coating using PVD
- Phase-field simulation of liquid phase migration in the WC–Co system during liquid phase sintering
- Investigation of texture, microstructure, and mechanical properties of a magnesium–lanthanum alloy after thermo-mechanical processing
- A combination of high electrical conductivity and mechanical strength in AA1070 commercially pure aluminum wires fabricated by KoBo extrusion
- In-situ formation of MgO whiskers and CNTs and their influence on the mechanical properties of low-carbon MgO–C refractory composites
- Experimental investigation of the Zn–Co–Sb system at 450°C
- Hydrogen storage thermodynamics and kinetics of LaMg11Ni + x wt.% Ni (x = 100, 200) alloys synthesized by mechanical milling
- Effect of high magnetic field on carbide precipitation in W6Mo5Cr4V3 high-speed steel during low-temperature tempering
- Dependency of structure, mechanical and electrical properties on rotating magnetic field in the Bi–Sn–Ag ternary eutectic alloy
- Large carbide dissolution in GCr15 continuously cast billet core
- Short Communications
- Synthesis and capacitive properties of V(S2)2 nanobelts on graphene sheets
- Mechanical properties of the novel B2-type binary Zr – Co alloys containing the B33 phase
- People
- Prof. Dr. Robert Danzer on the occasion of his 65th birthday
- DGM News
- DGM News
