Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

A comparative study of nanostructured calcium copper titanate thin film and powder and their properties

  • , und
Veröffentlicht/Copyright: 10. November 2015
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 106 Heft 11

Abstract

This paper reports on the effect of phase formation on the dielectric behaviour of nanostructured calcium copper titanate (CaCu3Ti4O12) thin film and powder prepared by using the sol–gel method. X-ray diffraction peaks were indexed as a cubic phase belonging to the Im3 space group for both film and powder. The monophase with a highly crystalline nature was obtained at lower temperature for thin film compared with powder. Micrographs of CaCu3Ti4O12 thin film and nanopowder confirmed the presence of nano-dimensional particles. The functional groups and optical properties of both film and powder were characterized by using the Fourier transform infrared spectrum and the photoluminescence spectrum. The CaCu3Ti4O12 thin film showed higher dielectric permittivity than powder, which strongly suggests that nanostructured thin film is a more efficient material than powder for microelectronic devices.

Keywords: Calcium copper titanate; Sol–gel synthesis; Thin film and nanopowder; Dielectric study
*Correspondence address, Dr. Marikani Arumugam, Department of Physics, Mepco Schlenk Engineering College, Sivakasi – 626 005, Tamil Nadu, India. Tel.: +91 4562 235690, Fax: +91 4562 235111, E-mail:

References

[1] L.Singh, I.W.Kim, B.C.Sin, U.S.Rai, A.Ullah, H.Chung, Y.Lee: RSC Adv.4 (2014) 52770. 10.1039/C4RA08915DSuche in Google Scholar

[2] U.Intatha, S.Eitssayeam, J.Wang, T.Tunkasiri: Current Appl. Phys.10 (2010) 21. 10.1016/j.cap.2009.04.006.Suche in Google Scholar

[3] L.Fang, M.Shen, J.Yang, Z.Li: J. Phys. D: Appl. Phys.38 (2005) 4236. 10.1088/0022-3727/38/23/015Suche in Google Scholar

[4] B.Jaffe, W.R.Cook, H.Jaffe: Piezoelectric Ceramics, Academic Press, New York (1971).Suche in Google Scholar

[5] D.Chakravarty, P.Singh, S.Singh, D.Kumar, O.Parkash: J. Alloys Compd.438 (2007) 253. 10.1016/j.jallcom.2006.08.024Suche in Google Scholar

[6] T.Li, J.Chen, D.Liu, Z.Zhang, Z.Chen, Z.Li, X.Cao, B.Wang: Ceram. Int.40 (2014) 9061. 10.1016/j.ceramint.2014.01.119Suche in Google Scholar

[7] M.A.Subramanian, D.Li, N.Duan, B.A.Reisner, A.W.Sleight: J. Solid State Chem.151 (2000) 323. 10.1006/jssc.2000.8703Suche in Google Scholar

[8] P.Ramirez, M.A.Subramanian, M.Garrdel, G.Blumborg, D.Li, T.Vogt, S.M.Shapiro: J. Solid State Comm.115 (2000) 217. 10.1016/S0038-1098(00)00182-4Suche in Google Scholar

[9] C.Homes, T.Vogt, S.M.Shaprio, S.Wakimoto, A.P.Ramirez: Science293 (2001) 673. 10.1126/science.1061655Suche in Google Scholar PubMed

[10] P.Lunmenheimer, R.Fichtl, S.G.Ebbinghaus, A.Loidl: Phys. Rev. B70 (2004) 172102. 10.1103/PhysRevB.70.172102Suche in Google Scholar

[11] D.C.Sinclair, T.B.Adams, F.D.Morrison, A.R.West: Appl. Phys. Lett.80 (12) (2002) 2153. 10.1063/1.1463211Suche in Google Scholar

[12] J.Li, M.A.Subramanian, H.D.Rosenfeld, C.Y.Jones, B.H.Toby, A.W.Sleight: Chem. Mater.16 (2004) 522. 10.1021/cm048345uSuche in Google Scholar

[13] M.A.Subramanian, A.W.Sleight: Solid State Sci.4 (2002) 347. 10.1016/S1293-2558(01)01262-6Suche in Google Scholar

[14] L.Singh, U.S.Rai, K.D.Mandal: Mat. Res. Bull.48 (2013) 2117. 10.1016/j.materresbull.2013.02.005Suche in Google Scholar

[15] G.Deng, P.Muralt: IOP Conf. Series: Mater. Sci. Eng.8 (2010) 012016. 10.1088/1757-899X/8/1/012016Suche in Google Scholar

[16] P.Fiorenza, R.L.Nigro, V.Raineri: Nanoscale Res. Lett.6 (2011) 118. 10.1186/1556-276X-6-118Suche in Google Scholar

[17] C.Altamore, C.Tringali, N.Sparta, S.D.Marco, A.Grasso, S.Ravesi: IOP Conf. Series: Mater. Sci. Eng.8 (2010) 012017. 10.1088/1757-899X/8/1/012017Suche in Google Scholar

[18] J.J.Mohamed, S.D.Hutagalung, M.F.Ain, K.Deraman, Z.A.Ahmad: Mater. Lett.61 (2007) 18735. 10.1016/j.matlet.2006.07.192Suche in Google Scholar

[19] A.Hassini, M.Gervais, J.Coulon, V.T.Phouc, F.Gervais: Mater. Sci. Eng. B87 (2) (2001) 164. 10.1016/S0921-5107(01)00709-7Suche in Google Scholar

[20] L.Singh, U.S.Rai, K.D.Mandal, B.C.Sin, S.Lee, Y.Lee: Ceram. Int.40 (2014) 10073. 10.1016/j.ceramint.2014.04.001Suche in Google Scholar

[21] L.Singh, U.S.Rai, K.D.Mandal, A.K.Rai: Appl. Phys. A112 (2013) 891. 10.1007/s00339-012-7443-zSuche in Google Scholar

[22] K.Chen, X.Zhang: Ceram. Int.36 (2010) 1523. 10.1016/j.ceramint.2010.02.018Suche in Google Scholar

[23] L.Singh, U.S.Rai, K.D.Mandal, B.C.Sin, H.Lee, H.Chung, Y.Lee: Mater. Char.96 (2014) 54. 10.1016/j.matchar.2014.07.019Suche in Google Scholar

[24] A.Z.Simoes, A.Ries, F.M.Filho, C.S.Riccardi, J.A.Varela, E.Longo: Appl. Phys. Lett.85 (2004) 5962. 10.1063/1.1834999Suche in Google Scholar

[25] V.D.Mote, Y.Purushotham, B.N.Dole: J. Theor. Appl. Phys.6 (2012) 6. 10.1186/2251-7235-6-6Suche in Google Scholar

[26] E.J.Mittemeijer, U.Welzel: Z. Kristallogr.223 (2008) 552. 10.1524/zkri.2008.1213Suche in Google Scholar

[27] V.S.Saji, H.C.Choe: Bull. Mater. Sci.33 (2010) 203. 10.1007/s12034-010-0031-ySuche in Google Scholar

[28] L.S.Cavalcante, M.F.C.Gurgel, E.C.Paris, A.Z.Simoes, M.R.Joya, J.A.Varela, P.S.Pizani, E.Longo: Acta Mater.55 (2007) 6416. 10.1016/j.actamat.2007.07.049Suche in Google Scholar

[29] A.F.L.Almeida, P.B.A.Fechine, M.P.F.Graca, M.A.Valente, A.S.B.Sombra: J. Mater. Sci.: Mater Electron.20 (2009) 163. 10.1007/s10854-008-9675-4Suche in Google Scholar

[30] S.Jesurani, S.Kanagesan, R.Velmurugan, T.Kalaivani: J. Mater. Sci.: Mater Electron.23 (2012) 668. 10.1007/s10854-011-0468-9Suche in Google Scholar

[31] S.Jesurani, S.Kanagesan, R.Velmurugan, C.Thirupathi, M.Sivakumar, T.Kalaivani: Mater. Lett.65 (2011) 3305. 10.1016/j.matlet.2011.06.107Suche in Google Scholar

[32] R.Parra, E.Joanni, J.W.M.Espinosa, R.Tararam, M.Cilense, P.R.Bueno, J.A.Varela, E.Longo: J. Am. Ceram. Soc.91 (2008) 4162. 10.1111/j.1551-2916.2008.02817.xSuche in Google Scholar

[33] T.Sequinel, I.G.Garcia, S.M.Tebcherani, E.T.Kubaski, L.H.Oliveira, M.S.Li, E.Longo, J.A.Varela: J. Alloys Compd.583 (2014) 488. 10.1016/j.jallcom.2013.08.210Suche in Google Scholar

[34] F.Moura, A.Z.Simoes, R.C.Deus, M.R.Silva, J.A.Varela, E.Longo: Ceram. Int.39 (2013) 3499. 10.1016/j.ceramint.2012.11.034Suche in Google Scholar

[35] I.L.V.Rosa, L.H.Oliveira, E.Longo, J.A.Varela: J. Fluoresc.21 (2011) 975. 10.1007/s10895-010-0671-8Suche in Google Scholar PubMed

[36] A.Srivastava, V.Gupta, C.K.Sarkar, R.R.Das, P.Bhattacharya, R.S.Katiyar: J. Appl. Phys.100 (2006) 034102. 10.1063/1.2170414Suche in Google Scholar

[37] S.Krohns, P.Lunkenheimer, S.G.Ebbinghaus, A.Loidl: J. Appl. Phys.103 (2008) 084107. 10.1063/1.2902374Suche in Google Scholar

[38] F.M.Pontes, E.J.H.Lee, E.R.Leite, E.Longo, J.A.Varela: J. Mater. Sci.35 (2000) 4783. 10.1023/A:1004816611050Suche in Google Scholar

[39] J.Li, K.Cho, N.Wu, A.Ignatiev: IEEE Trans. Dielectr. Electr. Insul.11 (2004) 534. 10.1109/TDEI.2004.1306731Suche in Google Scholar

[40] R.Kashyap, O.P.Thakur, R.P.Tandon: Ceram. Int.38 (2012) 3029. 10.1016/j.ceramint.2011.11.085Suche in Google Scholar

Received: 2015-02-25
Accepted: 2015-07-10
Published Online: 2015-11-10
Published in Print: 2015-11-10

© 2015, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Orientation-dependent plasma etch rates of single crystal silicon for dry etcher parts
  5. How to produce a desired bimodal microstructure for optimized mechanical properties: Investigation of the mechanisms of abnormal grain growth in pulsed electro-deposited nickel
  6. Microstructural evolution during solidification of Al–Cu-based alloys
  7. Effects of Sn and Ca on the microstructure and mechanical properties of Mg–Zn–Y–Nd–Zr alloys
  8. Wear properties of hybrid AlSi12 matrix syntactic foams
  9. Mechanical and tribological properties of functionally graded aluminium/zirconia metal matrix composite synthesized by centrifugal casting
  10. Estimation of distinctive mechanical properties of spark plasma sintered titanium–titanium boride composites through nano-indentation technique
  11. A comparative study of nanostructured calcium copper titanate thin film and powder and their properties
  12. Preparation of potato starch-based carbon particles by low-temperature carbonization in oil
  13. Short Communications
  14. Preparation of (100) oriented Sc-doped AlN film on flexible substrate under different pressures using RF reactive sputtering
  15. Novel borothermal synthesis of VB2 powders
  16. People
  17. Prof. Dr. Peter J. Uggowitzer on the occasion of his 65th birthday
  18. DGM News
  19. DGM News
https://doi.org/10.3139/146.111294
Schlagwörter für diesen Artikel
Calcium copper titanate; Sol–gel synthesis; Thin film and nanopowder; Dielectric study

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Orientation-dependent plasma etch rates of single crystal silicon for dry etcher parts
  5. How to produce a desired bimodal microstructure for optimized mechanical properties: Investigation of the mechanisms of abnormal grain growth in pulsed electro-deposited nickel
  6. Microstructural evolution during solidification of Al–Cu-based alloys
  7. Effects of Sn and Ca on the microstructure and mechanical properties of Mg–Zn–Y–Nd–Zr alloys
  8. Wear properties of hybrid AlSi12 matrix syntactic foams
  9. Mechanical and tribological properties of functionally graded aluminium/zirconia metal matrix composite synthesized by centrifugal casting
  10. Estimation of distinctive mechanical properties of spark plasma sintered titanium–titanium boride composites through nano-indentation technique
  11. A comparative study of nanostructured calcium copper titanate thin film and powder and their properties
  12. Preparation of potato starch-based carbon particles by low-temperature carbonization in oil
  13. Short Communications
  14. Preparation of (100) oriented Sc-doped AlN film on flexible substrate under different pressures using RF reactive sputtering
  15. Novel borothermal synthesis of VB2 powders
  16. People
  17. Prof. Dr. Peter J. Uggowitzer on the occasion of his 65th birthday
  18. DGM News
  19. DGM News
Heruntergeladen am 10.4.2026 von https://www.degruyterbrill.com/document/doi/10.3139/146.111294/html
Button zum nach oben scrollen