Startseite Failure limits of continuous carbon fibre reinforced plastics loaded with fibre parallel compression
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Failure limits of continuous carbon fibre reinforced plastics loaded with fibre parallel compression

  • Walter Michaeli und Fabian Preller
Veröffentlicht/Copyright: 11. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 103 Heft 1

Abstract

The strength analysis of continuous fibre reinforced plastics has to consider the reactions of the heterogeneous composite material. Ample uncertainties exist in the evaluation of fibre parallel compressive load, because no computation model has yet accomplished acceptance which on the one hand is physically fundamentally feasible and on the other hand works on the macroscopical level of the common design process.

This paper deals with the combination of a physically based failure model and a suitable modelling of the complex elastic properties. The results of this model combination are overall plausible. Additionally, experimental data confirm that moderate fibre transverse compression leads to an increase in the fibre parallel compressive strength.

Keywords: Continuous fibres; Biaxial compression; Compression strength; Failure criteria; Kinking
* Dr.-Ing. Fabian Preller, Institut für Kunststoffverarbeitung, RWTH Aachen, 52056 Aachen, Germany. Tel.: +49(0) 2418023818, Fax: +49(0)241 8022316, E-mail:

Dedicated to Prof. Dr.-Ing. Christina Berger on the occasion of her 65th birthday

References

[1] H.Schürmann: Konstruieren mit Faser-Matrix-Verbunden, Springer-Verlag, Berlin (2005).10.1007/b137636Suche in Google Scholar

[2] M.Knops: Analysis of Failure in Fiber Polymer Laminates, Springer-Verlag, Berlin (2008).Suche in Google Scholar

[3] K.K.U.Stellbrink: Micromechanis of Composites, Hanser-Verlag, Munich (1996).Suche in Google Scholar

[4] S.H.Lee, A.M.Waas: Int. J. Fracture100 (1999) 275.10.1023/A:1018779307931Suche in Google Scholar

[5] S.T.Pinho, L.Iannucci, P.Robinson: Composites A37 (2006) 63.10.1016/j.compositesa.2005.04.016Suche in Google Scholar

[6] J.Wiegand, N.Petrinic: Proc. 17th Int. Conf. Comp. Mat., Edinburgh, UK (2009).Suche in Google Scholar

[7] C.Matthek: Design in der Natur, Rombach-Verlag, Freiburg (1997).Suche in Google Scholar

[8] M. AhmerWadee, G.W.Hunt, M.A.Peletier: J. Mech. Phys. Solids52 (2004) 1071.10.1016/j.jmps.2003.09.026Suche in Google Scholar

[9] F.D.Fischer, H.Clemens, T.Schaden, F.Appel: Int. J. Mat. Res.98 (2007) 1041.Suche in Google Scholar

[10] S.R.Kalidindi, T.Zhen, M.W.Barsoum: Mat. Sci. Eng. A418 (2006) 95.10.1016/j.msea.2005.11.043Suche in Google Scholar

[11] T.Schaden, F.D.Fischer, H.Clemens, F.Appel, A.Bartels: Adv. Eng. Mat.8 (2006) 1109.10.1002/adem.200600238Suche in Google Scholar

[12] A.S.Argon: Treatise of Mat. Sci. and Tech.1 (1972) 79.10.1016/B978-0-12-341801-2.50007-2Suche in Google Scholar

[13] B.Budiansky, N.A.Fleck, J.C.Amazogo: J. Mech. Phys. Solids46 (1998) 1637.10.1016/S0022-5096(97)00042-2Suche in Google Scholar

[14] B.Budiansky: Comp. and Struct.16 (1983) 3.10.1016/0045-7949(83)90141-4Suche in Google Scholar

[15] P.M.Jelf, N.A.Fleck: J. Comp. Mat.26 (1992) 2706.10.1177/002199839202601804Suche in Google Scholar

[16] D.Liu, N.A.Fleck, M.P.F.Sutcliffe: J. Mech. Phys. Solids52 (2004) 1481.10.1016/j.jmps.2004.01.005Suche in Google Scholar

[17] C.G.DávilaP.P.Camanho, C.A.Rose: J. Comp. Mat.39 (2005) 323.Suche in Google Scholar

[18] S.T.Pinho, C.G.Dávila, P.P.Camanho, L.Iannucci, P.Robinson: Failure Models and Criteria for FRP Under In-Plane or Three-Dimensional Stress States Including Shear Non-Linearity, National Aeronautics and Space Administration, Washington, USA (2005)Suche in Google Scholar

[19] M.J.Pindera, C.T.Herakovich: Proc. 2nd USA-USSR Symp. Fracture of Comp. Mat., Bethlehem, PA, USA (1982).Suche in Google Scholar

[20] S.R.Swanson, M.J.Messick, Z.Tian: J. Comp. Mat.21 (1987) 619.10.1177/002199838702100703Suche in Google Scholar

[21] A.Puck, M.Mannigel: Comp. Sci. and Tech.67 (2007) 1955.10.1016/j.compscitech.2006.10.008Suche in Google Scholar

[22] A.Puck, H.Schürmann: Comp. Sci. and Tech.58 (1998) 1045.10.1016/S0266-3538(96)00140-6Suche in Google Scholar

[23] W.Michaeli, F.Preller, A.Krafzick: Z. Kunststofftechnik6 (2010) 138.Suche in Google Scholar

[24] L.J.Hart-Smith: Comp. Sci. and Tech.58 (1998) 1151.10.1016/S0266-3538(97)00192-9Suche in Google Scholar

[25] M.J.Hinton, A.S.Kaddour, P.D.Soden: Failure Criteria in Fibre Reinforced Polymer Composites: The World-Wide Failure Exercise, Elsevier, Oxford (2004).Suche in Google Scholar

[26] N.N.: VDI-Guideline 2014 Part 3: Development of FRP components: Analysis, Beuth, Düsseldorf (2006).Suche in Google Scholar

[27] S.W.Tsai, E.M.Wu: J. Comp. Mat.5 (1971) 58.10.1177/002199837100500106Suche in Google Scholar

Received: 2011-2-24
Accepted: 2011-10-24
Published Online: 2013-06-11
Published in Print: 2012-01-01

© 2012, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial January 2012
  5. Original Contributions
  6. High-strength aluminum-based light-weight materials for safety components – recent progress by microstructural refinement and particle reinforcement
  7. Microstructure – deformation relationships in fine grained high manganese TWIP steel – the role of local texture
  8. Microstructure of a eutectic NiAl—Mo alloy directionally solidified using an industrial scale and a laboratory scale Bridgman furnace
  9. Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
  10. Corrosion behavior of silicon oxycarbide-based ceramic nanocomposites under hydrothermal conditions
  11. Thermal cycling damage evolution of a thermal barrier coating and the influence of substrate creep, interface roughness and pre-oxidation
  12. Influence of creep and cyclic oxidation in thermal barrier coatings
  13. Residual stress states as a result of bending and straightening processes of steels in different heat treatment conditions
  14. Residual stresses under quasi-static and cyclic loading in shot peened Inconel 718
  15. Investigation of the surface residual stresses in spray cooled induction hardened gearwheels
  16. Stress-gradient induced fatigue at ultra high frequencies in sub micron thin metal films
  17. Influence of graphite spherical size on fatigue behaviour and fracture toughness of ductile cast iron EN-GJS-400-18LT
  18. Failure behaviour of the superalloy MAR-M247 LC under LCF, HCF and combined LCF/HCF loading
  19. Measuring techniques for the very high cycle fatigue behaviour of high strength steel at ultrasonic frequencies
  20. Failure limits of continuous carbon fibre reinforced plastics loaded with fibre parallel compression
  21. Development of an integrative simulation method to predict the microstructural influence on the mechanical behaviour of semi-crystalline thermoplastic parts
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.110634
Schlagwörter für diesen Artikel
Continuous fibres; Biaxial compression; Compression strength; Failure criteria; Kinking

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial January 2012
  5. Original Contributions
  6. High-strength aluminum-based light-weight materials for safety components – recent progress by microstructural refinement and particle reinforcement
  7. Microstructure – deformation relationships in fine grained high manganese TWIP steel – the role of local texture
  8. Microstructure of a eutectic NiAl—Mo alloy directionally solidified using an industrial scale and a laboratory scale Bridgman furnace
  9. Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
  10. Corrosion behavior of silicon oxycarbide-based ceramic nanocomposites under hydrothermal conditions
  11. Thermal cycling damage evolution of a thermal barrier coating and the influence of substrate creep, interface roughness and pre-oxidation
  12. Influence of creep and cyclic oxidation in thermal barrier coatings
  13. Residual stress states as a result of bending and straightening processes of steels in different heat treatment conditions
  14. Residual stresses under quasi-static and cyclic loading in shot peened Inconel 718
  15. Investigation of the surface residual stresses in spray cooled induction hardened gearwheels
  16. Stress-gradient induced fatigue at ultra high frequencies in sub micron thin metal films
  17. Influence of graphite spherical size on fatigue behaviour and fracture toughness of ductile cast iron EN-GJS-400-18LT
  18. Failure behaviour of the superalloy MAR-M247 LC under LCF, HCF and combined LCF/HCF loading
  19. Measuring techniques for the very high cycle fatigue behaviour of high strength steel at ultrasonic frequencies
  20. Failure limits of continuous carbon fibre reinforced plastics loaded with fibre parallel compression
  21. Development of an integrative simulation method to predict the microstructural influence on the mechanical behaviour of semi-crystalline thermoplastic parts
  22. DGM News
  23. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110634/pdf?lang=de
Button zum nach oben scrollen