Startseite Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys

  • Bronislava Gorr , Steffen Burk , Timo Depka , C. Somsen , Hisham Abu-Samra , H.-J. Christ und G. Eggeler
Veröffentlicht/Copyright: 11. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 103 Heft 1

Abstract

The influence of silicon on the oxidation behaviour of Co—Re—Cr-alloys has been studied at 1 000°C and 1 100°C. Consideration was given to the synergetic effects between chromium and silicon with respect to the development of a protective Cr2O3 layer. The Si addition to the Co—Re-alloys produces a significant decrease in the evaporation rate of Re oxides. Moreover, the beneficial influence in the transient oxidation period results in a rapid formation of Cr2O3 scale. While the addition of 1 and 2 at.% Si to the ternary Co-17Re-23Cr alloy was insufficient to form a continuous Cr2O3 scale, the addition of 3 at.% silicon caused a change in the oxidation mode resulting in the formation of a nearly continuous Cr2O3 scale. On the oxide/alloy interface of the alloy Co-17Re-30Cr-2Si, a continuous and dense Cr2O3 scale was observed, which remained stable after 100 h exposure protecting the metallic substrate.

Keywords: Co—Re-based alloys; High-temperature oxidation; Evaporation Re-oxides; Alloy development
* Bronislava Gorr, Institut für Werkstofftechnik, Paul-Bonatz-Str. 9–11, D-57068 University Siegen, Germany. Tel.: +49271 7404653, Fax: +49271 7402545, E-mail:

Dedicated to Prof. Dr.-Ing. Christina Berger on the occasion of her 65th birthday

References

[1] J.Rösler, D.Muckherji, T.Baranski: Adv. Eng. Mater.9 (2007) 876.10.1002/adem.200700132Suche in Google Scholar

[2] M.Brunner, R.Hüttner, M.C.Bölitz, R.Völkl, D.Mukherji, J.Rösler, T.Depka, C.Somsen, G.Eggeler, U.Glatzel: Mater. Sci. Eng.528 (2010) 650.10.1016/j.msea.2010.09.035Suche in Google Scholar

[3] B.Gorr, V.Trindade, S.Burk, H.-J.Christ, M.Klauke, D.Mukherji, J.Rösler: Oxid. Met.71 (2009) 157.10.1007/s11085-008-9133-ySuche in Google Scholar

[4] B.Gorr, S.Burk, V.Trindade, H.-J.Christ: Oxid. Met.74 (2010) 239.10.1007/s11085-010-9213-7Suche in Google Scholar

[5] P.Berthod: Oxid. Met.64 (2005) 235.10.1007/s11085-005-6562-8Suche in Google Scholar

[6] A.Paul, R.Sanchez, O.M.Montes, J.A.Odriozola: Oxid. Met.67 (2007) 87.10.1007/s11085-006-9046-6Suche in Google Scholar

[7] Y.Liu, W.Wei, L.Benum, M.Oballa, M.Gyorffy, W.Chen: Oxid. Met.73 (2010) 207.10.1007/s11085-009-9172-zSuche in Google Scholar

[8] B.Li, B.Gleeson: Oxid. Met.65 (2006) 101.10.1007/s11085-006-9003-4Suche in Google Scholar

[9] H.E.Evans, D.A.Hilton, R.A.Holm, S.J.Webster: Oxid. Met.19 (1983) 1.10.1007/BF00656225Suche in Google Scholar

[10] D.J.Baxter, R.T.Derricott, R.C.Hurst: Werkst. Korros.34 (1983) 446.10.1002/maco.19830340904Suche in Google Scholar

[11] S.Wang, Y.Wu, F.Gesmundo, Y.Niu: Oxid. Met.69 (2008) 299.10.1007/s11085-008-9103-4Suche in Google Scholar

[12] F.H.Stott, G.J.Gabriel, F.I.Wei, G.C.Wood: Werkst. Korros.38 (1987) 521.10.1002/maco.19870380910Suche in Google Scholar

[13] R.Durham, B.Gleeson, D.J.Young: Mat. Corros.49 (1998) 855.10.1002/(SICI)1521-4176(199812)49:12<855::AID-MACO855>3.0.CO;2-5Suche in Google Scholar

[14] D.E.Jones, J.Stringer: Oxid. Met.9 (1975) 409.10.1007/BF00611689Suche in Google Scholar

[15] H.E.Exner, H.P.Hougardy: Einführung in die Quantitative Gefügeanalyse, DGM-Informationsgesellschaft Verlag, Oberursel (1986).Suche in Google Scholar

[16] D.J.Young, B.A.Pint: Oxid. Met.66 (2006) 137.10.1007/s11085-006-9030-1Suche in Google Scholar

[17] H.Asteman, J.-E.Svensson, L.-G.Johansson, M.Norell: Oxid. Met.52 (1999) 95.10.1023/A:1018875024306Suche in Google Scholar

[18] A.Kumar and D.L.Douglass: Oxid. Met.10 (1976) 110.1007/BF00611695Suche in Google Scholar

[19] J.H.Schneibel, J.J.Kruzic, R.O.Ritchie: Mo–Si–B Alloy Development, information on http://www.ms.ornl.gov/fossil/pdf/APR/FY04/Materials/Schneibel.pdfSuche in Google Scholar

[20] F.A.Rioult, S.D.Imhoff, R.Sakidja, J.H.Perepezko: Acta Mat.57 (2009) 4600.10.1016/j.actamat.2009.06.036Suche in Google Scholar

Received: 2011-3-31
Accepted: 2011-10-20
Published Online: 2013-06-11
Published in Print: 2012-01-01

© 2012, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial January 2012
  5. Original Contributions
  6. High-strength aluminum-based light-weight materials for safety components – recent progress by microstructural refinement and particle reinforcement
  7. Microstructure – deformation relationships in fine grained high manganese TWIP steel – the role of local texture
  8. Microstructure of a eutectic NiAl—Mo alloy directionally solidified using an industrial scale and a laboratory scale Bridgman furnace
  9. Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
  10. Corrosion behavior of silicon oxycarbide-based ceramic nanocomposites under hydrothermal conditions
  11. Thermal cycling damage evolution of a thermal barrier coating and the influence of substrate creep, interface roughness and pre-oxidation
  12. Influence of creep and cyclic oxidation in thermal barrier coatings
  13. Residual stress states as a result of bending and straightening processes of steels in different heat treatment conditions
  14. Residual stresses under quasi-static and cyclic loading in shot peened Inconel 718
  15. Investigation of the surface residual stresses in spray cooled induction hardened gearwheels
  16. Stress-gradient induced fatigue at ultra high frequencies in sub micron thin metal films
  17. Influence of graphite spherical size on fatigue behaviour and fracture toughness of ductile cast iron EN-GJS-400-18LT
  18. Failure behaviour of the superalloy MAR-M247 LC under LCF, HCF and combined LCF/HCF loading
  19. Measuring techniques for the very high cycle fatigue behaviour of high strength steel at ultrasonic frequencies
  20. Failure limits of continuous carbon fibre reinforced plastics loaded with fibre parallel compression
  21. Development of an integrative simulation method to predict the microstructural influence on the mechanical behaviour of semi-crystalline thermoplastic parts
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.110626
Schlagwörter für diesen Artikel
Co—Re-based alloys; High-temperature oxidation; Evaporation Re-oxides; Alloy development

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial January 2012
  5. Original Contributions
  6. High-strength aluminum-based light-weight materials for safety components – recent progress by microstructural refinement and particle reinforcement
  7. Microstructure – deformation relationships in fine grained high manganese TWIP steel – the role of local texture
  8. Microstructure of a eutectic NiAl—Mo alloy directionally solidified using an industrial scale and a laboratory scale Bridgman furnace
  9. Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
  10. Corrosion behavior of silicon oxycarbide-based ceramic nanocomposites under hydrothermal conditions
  11. Thermal cycling damage evolution of a thermal barrier coating and the influence of substrate creep, interface roughness and pre-oxidation
  12. Influence of creep and cyclic oxidation in thermal barrier coatings
  13. Residual stress states as a result of bending and straightening processes of steels in different heat treatment conditions
  14. Residual stresses under quasi-static and cyclic loading in shot peened Inconel 718
  15. Investigation of the surface residual stresses in spray cooled induction hardened gearwheels
  16. Stress-gradient induced fatigue at ultra high frequencies in sub micron thin metal films
  17. Influence of graphite spherical size on fatigue behaviour and fracture toughness of ductile cast iron EN-GJS-400-18LT
  18. Failure behaviour of the superalloy MAR-M247 LC under LCF, HCF and combined LCF/HCF loading
  19. Measuring techniques for the very high cycle fatigue behaviour of high strength steel at ultrasonic frequencies
  20. Failure limits of continuous carbon fibre reinforced plastics loaded with fibre parallel compression
  21. Development of an integrative simulation method to predict the microstructural influence on the mechanical behaviour of semi-crystalline thermoplastic parts
  22. DGM News
  23. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110626/pdf?lang=de
Button zum nach oben scrollen