Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of deformation routes on the evolution of strain states and texture during asymmetrical cold rolling and subsequent annealing in interstitial-free steel

  • , , und
Veröffentlicht/Copyright: 31. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 101 Heft 8

Abstract

Asymmetrical rolling was carried out in an interstitial-free steel with different velocities of upper and lower rolls. In order to analyze the effect of change in strain histories on the evolution of textures during asymmetrical cold rolling and subsequent annealing, asymmetrical rolling was performed either reversibly or unidirectionally. The two different asymmetrical rolling routes were accompanied by the formation of different cold rolling textures. The strain state during asymmetrical rolling was determined by the finite element method and verified by macro-texture analysis and texture modeling. Weakening and randomization of textures occurred during recrystallization annealing, which was interpreted by the absence of preferred nucleation in specific orientations.

Keywords: Asymmetrical rolling; Strain state; Rolling texture; Shear texture; Finite element method
* Correspondence address: Prof. Dr. Moo-Young Huh, Department of Materials Science and Engineering, Korea University, 5-1, Anam-dong, Sungbuk-Gu, Seoul, 136-701, Republic of Korea, Tel.: +8223290 3271, Fax: +822928 3584. E-mail:

References

[1] M.Hölscher, D.Raabe, K.Lücke: Steel Res.62 (1991) 567.Suche in Google Scholar

[2] I.Samajdar, B.Verlinden, P. v.Houtte, D.Vanderschueren: Mater. Sci. Eng. A238 (1997) 343. 10.1016/S0921-5093(97)00455-3Suche in Google Scholar

[3] O.Engler, M.Y.Huh, C.N.Tomé: Metall. Mater. Trans. A31 (2000) 2299. 10.1007/s11661-000-0146-7Suche in Google Scholar

[4] P.S.Mathur, W.A.Backofen: Metall. Trans.4 (1973) 643. 10.1007/BF02643069Suche in Google Scholar

[5] L.S.TóthJ.J.Jonas, D.Daniel, R.K.Ray: Metall. Trans. A21 (1990) 2985.10.1007/BF02647219Suche in Google Scholar

[6] M.Y.Huh, Y.S.Cho, J.S.Kim, O.Engler: Z. Metallkd.90 (1999) 124.Suche in Google Scholar

[7] R.Saha, R.K.Ray, D.Bhattacharjee: Scripta Mater.57 (2007) 257. 10.1016/j.scriptamat.2007.03.055Suche in Google Scholar

[8] K.H.Kim, D.N.Lee: Acta Mater.49 (2001) 2583. 10.1016/S1359-6454(01)00036-2Suche in Google Scholar

[9] W.J.Kim, J.D.Park, W.Y.Kim: J. Alloy. Compd.460 (2008) 289. 10.1016/j.jallcom.2007.06.050Suche in Google Scholar

[10] W.J.Kim, J.B.Lee, W.Y.Kim, H.T.Jeong, H.G.Jeong: Scripta Mater.56 (2007) 309. 10.1016/j.scriptamat.2006.09.034Suche in Google Scholar

[11] A.Wauthier, H.Regle, J.Formigoni, G.Herman: Mater. Charact.60 (2009) 90. 10.1016/j.matchar.2008.07.004Suche in Google Scholar

[12] J.K.Lee, D.N.Lee: Int. J. Mech. Sci.50 (2008) 869. 10.1016/j.ijmecsci.2007.09.008Suche in Google Scholar

[13] Y.H.Ji, J.J.Park: Mater. Sci. Eng. A499 (2009) 14. 10.1016/j.msea.2007.11.099Suche in Google Scholar

[14] F.Zuo, J.Jiang, A.Shan, J.Fang, X.Zhang: Trans. Nonferrous Met. Soc. China18 (2008) 774. 10.1016/S1003-6326(08)60133-8Suche in Google Scholar

[15] W.Xia, Z.Chen, D.Chen, S.Zhu: J. Mater. Process. Technol.209 (2009) 26. 10.1016/j.jmatprotec.2008.01.045Suche in Google Scholar

[16] J.J.Nah, H.G.Kang, M.Y.Huh, O.Engler: Scripta Mater.58 (2008) 500. 10.1016/j.scriptamat.2007.10.049Suche in Google Scholar

[17] J.Sidor, A.Miroux, R.Petrov, L.Kestens: Acta Mater.56 (2008) 2495. 10.1016/j.actamat.2008.01.042Suche in Google Scholar

[18] H.Jin, D.J.Lloyd: Mater. Sci. Eng. A465 (2007) 267. 10.1016/j.msea.2007.02.128Suche in Google Scholar

[19] O.Engler, H.C.Kim, M.Y.Huh: Mater. Sci. Technol.17 (2001) 75.10.1179/026708301101508990Suche in Google Scholar

[20] V.Randle, O.Engler: Introduction to Texture Analysis: Macrotexture, Microtexture, Orientation Mapping, Gordon, Breach Sci. Publ., Amsterdam (2000).10.1201/9781482287479Suche in Google Scholar

[21] H.J.Bunge: Texture Analysis in Materials Science, Butterworths, London (1982).Suche in Google Scholar

[22] E.S.Park, J.C.Lee, M.Y.Huh, H.J.Kim, J.C.Bae: Mater. Sci. Eng. A449 (2007) 704. 10.1016/j.msea.2006.02.408Suche in Google Scholar

[23] M.Y.Huh, K.R.Lee, O.Engler: Int. J. Plast.20 (2004) 1183. 10.1016/j.ijplas.2003.08.003Suche in Google Scholar

[24] H.G.Kang, J.K.Kim, M.Y.Huh, O.Engler: Mater. Sci. Eng. A452 (2007) 347. 10.1016/j.msea.2006.10.130Suche in Google Scholar

[25] H.G.Kang, M.Y.Huh, S.H.Park, O.Engler: Steel Res. Int.79 (2008) 489.Suche in Google Scholar

[26] G.E.Dieter: Mechanical Metallurgy, McGraw-Hill, Singapore (1988).Suche in Google Scholar

[27] J.-S.Lu, O.-K.Harrer, W.Schwenzfeier, F.D.Fischer: Int. J. Mech. Sci.42 (2000) 49. 10.1016/S0020-7403(98)00112-XSuche in Google Scholar

[28] R.A.Lebensohn, C.N.Tomé: Acta Metall. Mater.41 (1993) 2611. 10.1016/0956-7151(93)90130-KSuche in Google Scholar

[29] C.N.ToméR.A.Lebensohn, in: D.Raabe, F.Roters, F.Barlat, L.Q.Chen (Eds.), Continuum Scale Simulation of Engineering Materials, Fundamentals, Microstructures, Process Applications, Wiley-VCH, Weinheim, Germany (2004) 473. 10.1002/3527603786.ch23Suche in Google Scholar

[30] S.H.Kim, H.G.Kang, M.Y.Huh, O.Engler: Mater. Sci. Eng. A508 (2009) 121. 10.1016/j.msea.2008.12.028Suche in Google Scholar

[31] W.A.Backofen: Deformation Processing, Addison-Wesley Pub. Co., Massachusetts (1972).Suche in Google Scholar

[32] F.Royer, C.Tavard, in: G.Gottstein, K.Lücke (Eds.), Proc. ICOTOM 5, Springer Verlag, Berlin (1978) 299.10.1007/978-3-642-81313-9_27Suche in Google Scholar

Received: 2009-7-13
Accepted: 2010-5-28
Published Online: 2013-05-31
Published in Print: 2010-08-01

© 2010, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial
  5. Basic
  6. Simulation of the co-sintering of composite structures
  7. Thermomechanical fatigue of 1.4849 cast steel – experiments and life prediction using a fracture mechanics approach
  8. Finite element modelling of coverage effects during shot peening of IN718
  9. Damage modelling for simulation of process chain from forming to crash
  10. Thermomechanical representation of the stored energy during plastic deformation
  11. Molecular dynamics simulation of gold solid film lubrication
  12. Modelling the effect of hydrogen on ductile tearing resistance of steels
  13. Modeling of formation of precipitate-free zone
  14. Applied
  15. Temperature dependence of the plastic flow of high-purity tungsten single crystals
  16. Nanoindentation studies on crosslinking and curing effects of PDMS
  17. Absorption and spectroscopic ellipsometry study of electron irradiated magnesium aluminate spinel
  18. Effect of deformation routes on the evolution of strain states and texture during asymmetrical cold rolling and subsequent annealing in interstitial-free steel
  19. Silica surface modified by aliphatic amines as effective copper complexing agents
  20. In-situ synthesis of Y2W3O12 within a Co-based superalloy powder mixture
  21. Nanoparticles of ZnS doped with iron as photocatalyst under UV and sunlight irradiation
  22. Durability of heavyweight concrete containing barite
  23. DGM News
  24. DGM News
https://doi.org/10.3139/146.110373
Schlagwörter für diesen Artikel
Asymmetrical rolling; Strain state; Rolling texture; Shear texture; Finite element method

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial
  5. Basic
  6. Simulation of the co-sintering of composite structures
  7. Thermomechanical fatigue of 1.4849 cast steel – experiments and life prediction using a fracture mechanics approach
  8. Finite element modelling of coverage effects during shot peening of IN718
  9. Damage modelling for simulation of process chain from forming to crash
  10. Thermomechanical representation of the stored energy during plastic deformation
  11. Molecular dynamics simulation of gold solid film lubrication
  12. Modelling the effect of hydrogen on ductile tearing resistance of steels
  13. Modeling of formation of precipitate-free zone
  14. Applied
  15. Temperature dependence of the plastic flow of high-purity tungsten single crystals
  16. Nanoindentation studies on crosslinking and curing effects of PDMS
  17. Absorption and spectroscopic ellipsometry study of electron irradiated magnesium aluminate spinel
  18. Effect of deformation routes on the evolution of strain states and texture during asymmetrical cold rolling and subsequent annealing in interstitial-free steel
  19. Silica surface modified by aliphatic amines as effective copper complexing agents
  20. In-situ synthesis of Y2W3O12 within a Co-based superalloy powder mixture
  21. Nanoparticles of ZnS doped with iron as photocatalyst under UV and sunlight irradiation
  22. Durability of heavyweight concrete containing barite
  23. DGM News
  24. DGM News
Heruntergeladen am 13.4.2026 von https://www.degruyterbrill.com/document/doi/10.3139/146.110373/html
Button zum nach oben scrollen