Article
Licensed
Unlicensed Requires Authentication

Quantitative characterization of the orientation spread within individual grains in copper after tensile deformation

  • , and
Published/Copyright: June 11, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 100 Issue 3

Abstract

By means of electron backscatter diffraction, orientations are determined on a regular grid on a polished section of a copper specimen after tensile deformation to 25 %. Individual grains separated by boundaries with disorientation angles above 7 are identified and the microtexture in the form of the orientation distribution function of each individual grain is analyzed. Extent and shape of the disorientation distribution in orientation space are quantified by the tensor of the second-order central moments, its principal values and directions. The latter characterize the main rotation axes of the orientation spread and the former the extent of the distribution in orientation space along these principal axes allowing a classification of the disorientation distribution into archetypical shapes. The disorientation distributions developed in grains with tensile axes close to [001] or [011] are more anisotropic than expected from their eight possibly activated slip systems indicating a mutual suppression of possibly activated slip systems.

Keywords: Tensile deformation; Texture; Orientation spread; EBSD
* Correspondence address, Dr. Wolfgang Pantleon Center for Fundamental Research: Metal Structures in Four Dimensions Materials Research Division Ris National Laboratory for Sustainable Energy Technical University of Denmark Frederiksborgvej 399, DK-4000 Roskilde, Denmark Tel.: +45 4677 5791 Fax: +45 4677 5758 E-mail:

References

[1] V.Randle: Microtexture determination and its application, The Institute of Materials, London (1992).Search in Google Scholar

[2] W.Pantleon: Mater. Sci. Techn.21 (2005) 1392–1396.10.1179/174328405X71657Search in Google Scholar

[3] W.Pantleon, W.He, T.P.Johannsson, C.Gundlach: Mater. Sci. Engng. A483 (2008) 668–671.10.1016/j.msea.2006.08.139Search in Google Scholar

[4] W.He, W.Ma, W.Pantleon: Mater. Sci. Engng. A494 (2008) 21–27.10.1016/j.msea.2007.10.092Search in Google Scholar

[5] S.L.Altmann: Rotations, quaternions, and double groups, Clarendon Press, Oxford (1986).Search in Google Scholar

[6] A.Morawiec: Orientations and rotations, Springer-Verlag, Berlin (2004).10.1007/978-3-662-09156-2Search in Google Scholar

[7] N.C.Krieger Lassen, D.Juul Jensen, K.Conradsen: Acta Cryst. A50 (1994) 741–748.10.1107/S010876739400437XSearch in Google Scholar

[8] M.Humbert, N.Grey, J.Muller, C.Esling: J. Appl. Cryst.29 (1996) 662–666.10.1107/S0021889896006693Search in Google Scholar

[9] W.F.Hosford: The mechanics of crystals and textured polycrystals, Oxford Science Publication, Oxford (1993).Search in Google Scholar

[10] G.I.Taylor: J. Inst. Met.62 (1938) 307–324.Search in Google Scholar

[11] J.F.W.Bishop, R.Hill: Philos. Mag.42 (1951) 1298–1307.10.1080/14786444108561385Search in Google Scholar

[12] J.F.W.Bishop: Philos. Mag.44 (1953) 51–64.10.1080/14786440108520274Search in Google Scholar

[13] U.F.Kocks: Metal. Trans.1 (1970) 1121–1143.10.1007/BF02900224Search in Google Scholar

Received: 2008-8-26
Accepted: 2008-12-21
Published Online: 2013-06-11
Published in Print: 2009-03-01

© 2009, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. 11th ISPMA in Prague
  5. Feature
  6. Physical aspects of plastic deformation in Mg–Al alloys with Sr and Ca
  7. Review
  8. Fe–Al materials for structural applications at high temperatures: Current research at MPIE
  9. Basic
  10. Very high cycle fatigue behaviour of as-extruded AZ31, AZ80, and ZK60 magnesium alloys
  11. Phase composition and morphology development in WE-type alloys modified by high Zn content
  12. Microstructural investigation of the failure mechanisms after creep exposure of Mg–Y–Nd–Zn–Mn alloy
  13. Theoretical investigation of phase equilibria by the continuous displacement cluster variation method
  14. Alloying behaviour of binary transition metal systems
  15. Surface composition of a Ag-5.1Cu (mass%) alloy
  16. Temperature and strain rate dependent flow criterion for bcc transition metals based on atomistic analysis of dislocation glide
  17. Strain-hardening behaviour of AZ31 magnesium alloys
  18. Bauschinger effect in thin metal films simulated by the continuum dislocation-based model
  19. Core structure of screw dislocations in hcp Ti: an ab initio DFT study
  20. Long-range internal stresses in monotonically and cyclically deformed metallic single crystals
  21. Energetic formulation of nonlocal crystal plasticity
  22. Austenite–martensite interfaces in strained foils of CuAlNi alloy
  23. Mechanical anisotropy and ideal strength in a multifunctional Ti–Nb–Ta–Zr–O alloy (Gum Metal)
  24. Low-cycle fatigue properties of TiAl alloy with high Nb content
  25. Mechanism and kinetics of the intermediary phase formation in Ti–Al and Ti–Al–Si systems during reactive sintering
  26. Influence of the dynamic crystallization conditions on the martensitic transformation in the Ti40.7Hf9.5Ni39.8Cu10 shape memory alloy
  27. Isostructural phase transition in hexagonal Ce1–xYxPdAl compounds
  28. Structural and phase transformations in Zr and Zr–Nb alloys under loading by spherical converging stress waves
  29. Influence of titanium volume fraction on the mechanical properties of Mg–Ti composites
  30. Applied
  31. Effects of prior homogenization treatments on microstructure development and mechanical properties of the extruded wrought magnesium alloy ZK60
  32. Annealing effects after various thermo-mechanical treatments on microstructure and mechanical properties of the wrought magnesium alloy AZ80
  33. Vacancy–solute interaction in magnesium alloy WE54 during artificial ageing: a positron annihilation spectroscopy study
  34. FeAl-based alloys cast in an ultrasound field
  35. High-temperature mechanical properties of Fe-40 at.% Al based intermetallic alloys with C or Ti addition
  36. The influence of dispersoids on the recrystallization of aluminium alloys
  37. High-rate plastic deformation of a copper single crystal under loading by spherical converging shock waves
  38. Hardening and softening in an Mg–Al–Ca matrix alloy reinforced with short graphite fibres
  39. Deformation behaviour of microcrystalline magnesium reinforced by alumina nano- and microparticles
  40. Thresholds in creep of magnesium alloy AX41 composites reinforced with short fibers
  41. Recovery processes in magnesium alloy AX41 and AX41-12 vol.% C-fibre composite studied by dilatometry
  42. Directional crystallisation of Ti–Al–Si in-situ composites
  43. Microstructure and mechanical properties of the AA6082 aluminium alloy with small additions of Sc and Zr
  44. Microstructure of a ternary Al–Pd–Rh alloy
  45. Effect of annealing on microstructure and properties of twin-roll-cast Al–Mn alloys with different copper content
  46. Quantitative characterization of the orientation spread within individual grains in copper after tensile deformation
  47. Effect of crystallization on the deformation behavior of a Zr-based bulk metallic glass
  48. Changes in structure and properties of carbide-steel cermets resulted from a heat treatment
  49. Comparative study of the high-temperature behaviour of Mg–Al and Mg–Zn wrought alloys
  50. Notification
  51. DGM News
https://doi.org/10.3139/146.110032
Keywords for this article
Tensile deformation; Texture; Orientation spread; EBSD

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. 11th ISPMA in Prague
  5. Feature
  6. Physical aspects of plastic deformation in Mg–Al alloys with Sr and Ca
  7. Review
  8. Fe–Al materials for structural applications at high temperatures: Current research at MPIE
  9. Basic
  10. Very high cycle fatigue behaviour of as-extruded AZ31, AZ80, and ZK60 magnesium alloys
  11. Phase composition and morphology development in WE-type alloys modified by high Zn content
  12. Microstructural investigation of the failure mechanisms after creep exposure of Mg–Y–Nd–Zn–Mn alloy
  13. Theoretical investigation of phase equilibria by the continuous displacement cluster variation method
  14. Alloying behaviour of binary transition metal systems
  15. Surface composition of a Ag-5.1Cu (mass%) alloy
  16. Temperature and strain rate dependent flow criterion for bcc transition metals based on atomistic analysis of dislocation glide
  17. Strain-hardening behaviour of AZ31 magnesium alloys
  18. Bauschinger effect in thin metal films simulated by the continuum dislocation-based model
  19. Core structure of screw dislocations in hcp Ti: an ab initio DFT study
  20. Long-range internal stresses in monotonically and cyclically deformed metallic single crystals
  21. Energetic formulation of nonlocal crystal plasticity
  22. Austenite–martensite interfaces in strained foils of CuAlNi alloy
  23. Mechanical anisotropy and ideal strength in a multifunctional Ti–Nb–Ta–Zr–O alloy (Gum Metal)
  24. Low-cycle fatigue properties of TiAl alloy with high Nb content
  25. Mechanism and kinetics of the intermediary phase formation in Ti–Al and Ti–Al–Si systems during reactive sintering
  26. Influence of the dynamic crystallization conditions on the martensitic transformation in the Ti40.7Hf9.5Ni39.8Cu10 shape memory alloy
  27. Isostructural phase transition in hexagonal Ce1–xYxPdAl compounds
  28. Structural and phase transformations in Zr and Zr–Nb alloys under loading by spherical converging stress waves
  29. Influence of titanium volume fraction on the mechanical properties of Mg–Ti composites
  30. Applied
  31. Effects of prior homogenization treatments on microstructure development and mechanical properties of the extruded wrought magnesium alloy ZK60
  32. Annealing effects after various thermo-mechanical treatments on microstructure and mechanical properties of the wrought magnesium alloy AZ80
  33. Vacancy–solute interaction in magnesium alloy WE54 during artificial ageing: a positron annihilation spectroscopy study
  34. FeAl-based alloys cast in an ultrasound field
  35. High-temperature mechanical properties of Fe-40 at.% Al based intermetallic alloys with C or Ti addition
  36. The influence of dispersoids on the recrystallization of aluminium alloys
  37. High-rate plastic deformation of a copper single crystal under loading by spherical converging shock waves
  38. Hardening and softening in an Mg–Al–Ca matrix alloy reinforced with short graphite fibres
  39. Deformation behaviour of microcrystalline magnesium reinforced by alumina nano- and microparticles
  40. Thresholds in creep of magnesium alloy AX41 composites reinforced with short fibers
  41. Recovery processes in magnesium alloy AX41 and AX41-12 vol.% C-fibre composite studied by dilatometry
  42. Directional crystallisation of Ti–Al–Si in-situ composites
  43. Microstructure and mechanical properties of the AA6082 aluminium alloy with small additions of Sc and Zr
  44. Microstructure of a ternary Al–Pd–Rh alloy
  45. Effect of annealing on microstructure and properties of twin-roll-cast Al–Mn alloys with different copper content
  46. Quantitative characterization of the orientation spread within individual grains in copper after tensile deformation
  47. Effect of crystallization on the deformation behavior of a Zr-based bulk metallic glass
  48. Changes in structure and properties of carbide-steel cermets resulted from a heat treatment
  49. Comparative study of the high-temperature behaviour of Mg–Al and Mg–Zn wrought alloys
  50. Notification
  51. DGM News
Downloaded on 13.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.110032/html
Scroll to top button