Personal

Articles in the same Issue

1. Contents
2. Contents
3. Feature
4. Beyond fick's equations, an overview
5. Review
6. The high-temperature creep properties of materials processed using severe plastic deformation
7. Nanostructuring of metallic materials by spd processing for advanced properties
8. Basic
9. Some factors affecting the creep behaviour of metallic materials processed by equal-channel angular pressing
10. The elastic–plastic transition in nanograined polycrystals
11. Synchrotron X-ray line-profile analysis experiments for the in-situ microstructural characterisation of SPD nanometals during tensile deformation
12. Tensile and fatigue properties of sub-microcrystalline ultra-low carbon steel produced by hpt-straining
13. Precipitation Effects in Ultra-Fine-Grained Mg–RE Alloys
14. EBSD investigation of the grain boundary distributions in ultrafine-grained Cu and Cu–Zr polycrystals prepared by equal-channel angular pressing
15. Acoustic emission study of the deformation behaviour of magnesium sheets
16. Mechanical properties of pure titanium and Ti-6Al-4V alloys with a new tailored nano/meso hybrid microstructure
17. In-situ SEM/EBSD observation of abnormal grain growth in electrodeposited nanocrystalline nickel
18. High-temperature creep properties of Fe–Al alloys modified by Zr
19. ALCHEMI study of chromium doped iron-aluminides
20. Intermetallic compounds at the interface between Sn–Cu(–Ni) solders and Cu substrate
21. The effect of the microstructure on elastic properties of a polycrystalline stoichiometric NiAl
22. Ab-initio simulation of the tensile strength of silicon nanofilms
23. New properties of halogen plasma-treated Cu films
24. Applied
25. High-speed deformation of titanium during dynamic channel-angular pressing
26. Microstructural evolution of equal-channel angular pressed interstitial-free steel
27. Effect of equal channel angular pressing on microstructure, texture, and high-cycle fatigue performance of wrought magnesium alloys
28. The characteristics of superplastic flow in a magnesium alloy processed by ECAP
29. Deformation behaviour of ultrafine-grained 7075 aluminium alloy
30. The optimization of ECAP conditions to achieve high strain-rate superplasticity in a Zr- and Sc-modified aa 7075 aluminum alloy
31. Multilayer composite al99.99/almg3 sheets prepared by accumulative roll bonding
32. Preparation of ultrafine-grained twin-roll cast AlMg3 sheets by accumulative roll bonding
33. Recovery and recrystallization behavior of aluminum processed by extrusion-preceded equal channel angular pressing
34. Low sliding-wear resistance of ultrafine-grained Al alloys and steel having undergone severe plastic deformation
35. Study of the recrystallization of AW-5049 and AW-5754 twin-roll cast alloys by EBSD
36. XRD profile analysis of ECAP Cu and Cu + Zr samples
37. Stability of microstructure in silver processed by severe plastic deformation
38. Acoustic emission study of the mechanical anisotropy of the extruded AZ31 alloy
39. Effects of shot peening on internal friction in cp aluminum and aluminum alloy 6008
40. Effects of grain growth on microhardness and coercivity in electrodeposited nanocrystalline nickel
41. Strain release from pre-deformed Ni_53.6Mn_27.1Ga_19.3 shape memory alloy during thermal cycling
42. Simulation of the growth kinetics of FeB and Fe₂B phases on the AISI M2 borided steel: Effect of the paste thickness
43. High-pressure torsion deformation of a magnesium-based nanocomposite
44. Fracture behavior of Mg–Li matrix composites
45. Notifications
46. The 80^th Birthday of Dr.-Ing. Wolfgang Eychmüller
47. Personal