Home DGM News
Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: November 29, 2018
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 109 Issue 12

Published Online: 2018-11-29
Published in Print: 2018-12-10

© 2018, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Dendritic structure formation of magnesium alloys for the manipulation of corrosion properties: Part 1 – microstructure
  5. The influence of twinning on plastic constitutive description of a magnesium alloy
  6. Effect of V and Zr microalloying, and heat treatment on microstructure and mechanical properties of secondary Al-7Si-3Cu-0.3Mg alloy
  7. Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al–Zn–Mg–Cu alloy
  8. Microstructural evolution and mechanical properties of thixoformed 7075 aluminum alloy prepared by conventional and new modified SIMA processes
  9. Hot torsion behavior of SP-700 near beta titanium alloy in single and dual phase regions
  10. Effect of B4C in Ti-6Al-4V matrix on workability behavior of powder metallurgy composites during cold upsetting
  11. Synthesis of Ni/YSZ based anode and investigation of effect of PVA as pore-former upon porosity, microstructure and thermal behavior for potential use in solid oxide fuel cells (SOFCs)
  12. The corrosion behavior of porous Ni–Cr–Fe alloy in 2 mol L−1 alkaline solution
  13. Short Communications
  14. The grain growth in alumina compacts sintered under high pressure
  15. DGM News
  16. DGM News
https://doi.org/10.3139/146.018124

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Dendritic structure formation of magnesium alloys for the manipulation of corrosion properties: Part 1 – microstructure
  5. The influence of twinning on plastic constitutive description of a magnesium alloy
  6. Effect of V and Zr microalloying, and heat treatment on microstructure and mechanical properties of secondary Al-7Si-3Cu-0.3Mg alloy
  7. Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al–Zn–Mg–Cu alloy
  8. Microstructural evolution and mechanical properties of thixoformed 7075 aluminum alloy prepared by conventional and new modified SIMA processes
  9. Hot torsion behavior of SP-700 near beta titanium alloy in single and dual phase regions
  10. Effect of B4C in Ti-6Al-4V matrix on workability behavior of powder metallurgy composites during cold upsetting
  11. Synthesis of Ni/YSZ based anode and investigation of effect of PVA as pore-former upon porosity, microstructure and thermal behavior for potential use in solid oxide fuel cells (SOFCs)
  12. The corrosion behavior of porous Ni–Cr–Fe alloy in 2 mol L−1 alkaline solution
  13. Short Communications
  14. The grain growth in alumina compacts sintered under high pressure
  15. DGM News
  16. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 15.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.018124/pdf?lang=en
Scroll to top button