Startseite Technik Investigation of the effects of different composite materials on neutron contamination caused by medical LINAC / Untersuchung der Auswirkungen verschiedener Verbundmaterialien auf die Neutronenkontamination durch medizinische LINAC
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Investigation of the effects of different composite materials on neutron contamination caused by medical LINAC / Untersuchung der Auswirkungen verschiedener Verbundmaterialien auf die Neutronenkontamination durch medizinische LINAC

  • O. Karaman , H. Özdogan , Y. A. Üncü , C. Karaman und A. G. Tanır
Veröffentlicht/Copyright: 23. Februar 2021
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

In a medical linear accelerator, the primary and secondary collimators are generally made of high atomic weight metals. The energy of the x-rays generated by accelerated electrons exceeds the bonding energies of high atomic number materials such as tungsten, and lead in the structure of the components in the accelerator head, it causes the production of neutron from the nucleus. Consequently, the resulting photo-neutrons can easily be scattered and spread into the treatment room. Thus, an additional neutron dose cannot be ignored in the tumor volume of the patient and in areas outside this volume. The contribution of the primary and secondary collimators to the neutron contamination is found to be approximately 52% and 30%, respectively. In this paper, the effects of using different composite materials such as Boron, Cadmium, and Polyethylene in secondary collimators on neutron contamination have been investigated by using Fluka Monte Carlo and TALYS 1.9 codes

Online erschienen: 2021-02-23
Erschienen im Druck: 2020-05-01

© 2020 by Walter de Gruyter Berlin/Boston

Artikel in diesem Heft

  1. CONTENTS
  2. CALENDAR OF EVENTS / VERANSTALTUNGSKALENDER
  3. Simulations for L-STAR experimental gas-cooled system / CFD-Nachrechnung von L-STAR-Versuchen zur Wärmeübertragung von turbulenten Gasströmungen
  4. Solution of Full-Core VVER-440 PK-3+ calculation benchmark by Serpent / Aktualisierte Referenzlösung des Berechnungsbenchmarks ,,PK-3+ Vollkern eines WWER-440" mit dem Programm Serpent
  5. Simulation of subcooled boiling in multiphase CFD code CFX / Simulation des unterkühlten Siedens im Mehrphasen-CFDCode CFX
  6. Validation of a new neutronics/thermal hydraulics coupling code for steady state analysis of light water reactors / Analyse stationärer Betriebsbedingungen in LWR durch gekoppelte Rechnungen
  7. Development of a radioecological model for accidental release of radionuclides / Entwicklung eines radioökologischen Modells für die unfallbedingte Freisetzung von Radionukliden.
  8. Sensitivity and uncertainty analysis for a radioecological model / Sensitivitäts- und Unsicherheitsanalyse eines radioökologischen Modells
  9. Extension to quadratic anisotropic scattering in one-speed neutron transport equation for critical thickness calculations / Berücksichtigung der quadratischen anisotropen Streuung bei der Lösung der 1-Geschwindigkeites-Neutronentransportgleichung zur kritischen Dickenberechnung
  10. Technical Note
  11. Results of the ATHLET/BIPR-VVER software system (version 1.0) certification / Ergebnisse der Zertifizierung des Softwaresystems ATHLET/ BIPR-VVER (Version 1.0)
  12. Maintaining safe continued operation of nuclear installations during pandemics / Aufrechterhaltung des sicheren Weiterbetriebs von Nuklearanlagen während Pandemien
  13. Investigation of the effects of different composite materials on neutron contamination caused by medical LINAC / Untersuchung der Auswirkungen verschiedener Verbundmaterialien auf die Neutronenkontamination durch medizinische LINAC
  14. Imprint
Heruntergeladen am 15.12.2025 von https://www.degruyterbrill.com/document/doi/10.3139/124.200022/html
Button zum nach oben scrollen