Influence of processing parameters on the fatigue life time of specimens made from quenched and tempered steel SAE 4140H

Articles in the same Issue

1. Inhalt/Contents
2. Contents
3. Fachbeiträge/Technical Contributions
4. In situ computed tomography for the characterization of the fatigue damage development in glass fiber-reinforced polyurethane
5. Phase evolution of surface-modified Incoloy 825 superalloy using pack aluminization
6. Material qualification of a 13Cr-L80 casing for sour conditions
7. Influence of processing parameters on the fatigue life time of specimens made from quenched and tempered steel SAE 4140H
8. Impact of notch geometry on dynamic strength of materials
9. Hygrothermal environment effects on mechanical properties of T700/3228 CFRP laminates
10. Effect of austenitizing temperature on the microstructure evolution and properties of Cu-bearing CADI
11. Characterization of the boron layer formed by pack boronizing of binary iron-niobium alloys
12. Corrosion inhibition of steel in a sodium chloride solution by natural honey
13. Effect of notch-depth ratio on intermittent electromagnetic radiation from Cu-Ni alloy under tension
14. Physical, mechanical and thermal behavior of recycled agro waste GSA reinforced green composites
15. Effects of multi-pass cutting during wire electrical discharging
16. Effects of thrust force variation during the drilling of pure and chemically treated Kevlar based polymer composites
17. Dynamic mechanical and fracture morphology of kevlar fiber filled groundnut reinforced epoxy composites