Home Mechanical and electrical properties of Sb-Ga50Au10In40 alloys
Article
Licensed
Unlicensed Requires Authentication

Mechanical and electrical properties of Sb-Ga50Au10In40 alloys

  • Lidija Gomidželović , Dragana Živković , Emina Požega , Vladan Ćosović , Ljubiša Balanović and Dragan Manasijević
Published/Copyright: August 31, 2015
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Materials Testing
From the journal Materials Testing Volume 57 Issue 9

Abstract

In this publication, results are presented which have been obtained by investigation of mechanical and electrical properties of alloys belonging to Sb-Ga50Au10In40 section of quaternary Au-Ga-In-Sb system, which is the basis for the development of new lead-free solder materials. The experiments were conducted using Brinell method for hardness measurement, apparatus PTM-3 for microhardness measurement and instrument Foerster SIGMATEST 2.069 for measuring of electrical conductivity. The microstructure of samples was analyzed using optical microscopy.

Kurzfassung

Im vorliegenden Beitrag werden Ergebnisse präsentiert, die bei einer Untersuchung der mechanischen und elektrischen Eigenschaften von Legierungen ermittelt wurden, die zum Abschnitt Sb-Ga50Au10In40 des quaternären Systems Au-Ga-In-Sb gehören und die Basis für die Entwicklung von neuen bleifreien Loten bilden. Die Experimente wurden ausgeführt, in dem das Brinell-Verfahren für die Härtemessungen unter Verwendung des Apparats PTM-3 für die Mikrohärtemessung angewandt wurde und das Instrument Foerster SIGMATEST 2.069 für die Messung der elektrischen Leitfähigkeit verwendet wurde. Die Mikrostruktur der Proben wurde mittels optischer Mikroskopie analysiert.

§Correspondence Address, Dr. Lidija Gomidželović, Mining and Metallurgy Institute, University of Bor, Zeleni bulevar 35, 19210 Bor, Serbia. E-mail:

Dr. Lidija Gomidželović, born 1974, is Research Fellow in the Mining and Metallurgy Institute Bor, Serbia. She received her PhD degree in 2012. Her research areas cover lead-free solder materials, thermodynamics of alloys and respective characterization.

Dr. Dragana Živković, born 1965, is Full Professor In the Department of Metallurgical Engineering of the Technical Faculty in Bor, University of Belgrade, Serbia. Her main fields of interest are thermodynamics of metallurgical processes synthesis, investigation of advanced metallic materials and kinetics of the processes in the multiphase systems in extractive metallurgy.

Emina Požega, born 1973, is Research Fellow in the Mining and Metallurgy Institute Bor and PhD student at the Technical Faculty in Bor, University of Belgrade, Serbia. Her research areas focus on materials and chemical technologies.

Dr. Vladan Ćosović, born 1974, is Research Fellow in the Department of Materials and Metallurgy, Institute of Chemistry, Technology and Metallurgy at the University of Belgrade, Serbia. In 2008, he received his PhD degree. His research interests cover synthesis and characterization of nanocrystalline and nanocomposite functional materials, electrical contacts and solder materials.

Dr Ljubiša Balanović, born 1975, is engaged at the Technical Faculty in Bor, University of Belgrade, Serbia as Teaching Assistant for graduate and master courses in the study program. She received her PhD degree in 2013 in the field of Metallurgical Engineering. Her research areas cover advanced eco-materials, thermodynamics of multi-component metal systems and metallurgical kinetics.

Dr. Dragan Manasijević, born 1975, is Associate Professor in the Department of Extractive Metallurgy, University of Belgrade, Technical Faculty in Bor (Serbia). His main fields of interest are thermodynamics and phase diagrams of multicomponent systems, calculation and experimental determination of phase diagrams as well as thermal analysis methods.

References

1 N. C.Lee: Lead-free soldering – Where the world is going, Advancing Microelectronics26 (1999), No. 5, pp. 29–35Search in Google Scholar

2 J. S.Hwang: Environment-Friendly Electronics: Lead–Free Technology, 1st Ed., Electrochemical Publications Ltd., Port Erin, USA (2001)Search in Google Scholar

3 D.Živković, B.Trumić, Ž.Živković: Thermodynamic investigations and charaterization of some alloys in ternary Pb-Au-Bi system, Calorimetry and Thermal Analysis31 (2004), No. 5, pp. 227–23310.11311/jscta1974.31.227Search in Google Scholar

4 B.Trumić, D.Živković, Ž.Živković, D.Manasijević: Comparative thermodynamic analysis of the Pb-Au0.7Sn0.3 section in the Pb-Au-Sn ternary system, Thermochimica Acta435 (2005), No. 1, pp. 113–11710.1016/j.tca.2005.05.003Search in Google Scholar

5 G. M.Blom, T. S.Plaskett: The In-Ga-Sb ternary phase diagram, Journal of the Electrochemical Society118 (1971), No. 11, pp. 1831–183410.1149/1.2407845Search in Google Scholar

6 A.Joullie, R.Aulombard, G.Bougnot: Growth of GaxIn1-xSb liquid phase epitaxial layers from a knowledge of the ternary phase diagram, Journal of Crystal Growth24/25 (1974), pp. 276–28110.1016/0022-0248(74)90318-2Search in Google Scholar

7 I.Katayama, J.-I.Nakayama, T.Ikura, T.Tanaka, Z.Kozuka, T.Iida: Measurement of activity of gallium in Ga-Sb-In alloys by EMF method using zirconia as solid electrolyte, Journal of Non-Crystalline Solids156–158 (1993), No. 1, pp. 393–39710.1016/0022-3093(93)90204-BSearch in Google Scholar

8 L.Gomidželović, D.Živković, A.Kostov, A.Mitovski, Lj.Balanović: Comparative thermodynamic study of Ga–In–Sb system, Journal of Thermal Analysis and Calorimetry103 (2011), No. 3, pp. 1105–110910.1007/s10973-010-1203-0Search in Google Scholar

9 D.Živković, L.Gomidželović, D.Manasijević, N.Talijan, V.Ćosović: Calorimetric study and phase diagram investigation of the Au-Ga system, International Journal of Materials Research104 (2012), No. 6, pp. 554–56010.3139/146.110905Search in Google Scholar

10 L.Gomidželović, D.Živković, N.Talijan, V.Ćosović, Lj.Balanović: Characterization of Au-Ga alloys with low gold content, Materials Testing54 (2012), No. 5, pp. 347–35010.3139/120.110338Search in Google Scholar

11 J.Liu, C.Guo, C.Li, Z.Du: Thermodynamic assessment of the Au-Ga system, Journal of Alloys and Compounds508 (2010), No. 1, pp. 62–7010.1016/j.jallcom.2010.08.044Search in Google Scholar

12 J.Wang, Y. J.Liu, L. B.Liu, H. Y.Zhou, Z. P.Jin: Thermodynamic assessment of the Au-Ga binary system, Calphad35 (2011), No. 2, pp. 242–24810.1016/j.calphad.2010.10.009Search in Google Scholar

13 L.Gomidželović, D.Živković, N.Talijan, D.Manasijević, V.Ćosović, A.Grujić: Phase equilibria investigation and characterization of the Au-In-Sb system, Journal of Optoelectronics and Advanced Materials10 (2008), No. 2, pp. 455–460Search in Google Scholar

14 L.Gomidželović, D.Živković: Thermodynamic analysis of Au-In-Sb system using Oelsen calorimetry and predicting methods, Journal of Thermal Analysis and Calorimetry98 (2009), No. 3, pp. 743–74810.1007/s10973-009-0212-3Search in Google Scholar

15 S.Hassam, D.Boa, J.Rogez: Calorimetric investigations of Au-In, In-Sb and Au-In-Sb systems at 973 K, Journal of Alloys and Compounds520 (2012), pp. 65–7110.1016/j.jallcom.2011.12.074Search in Google Scholar

16 L.Gomidželović, Z.Stanković, Z.Stević, D.Živković: Electrochemical characterization of the Au-In-Sb system, Hemijska Industrija63 (2009), No. 4, pp. 289–292 (in Serbian)10.2298/HEMIND0904289GSearch in Google Scholar

17 L.Gomidželović, D.Živković, Ž.Živković: Calculation of mixing enthalpies for ternary Au-In-Sb alloys, Journal of Chemical Technology and Metallurgy42 (2007), No. 2, pp. 207–210Search in Google Scholar

18 L.Gomidželović, D.Živković, I.Mihajlović, V.Trujić: Predicting of thermodynamic properties of ternary Au-In-Sb system, Archives of Metallurgy and Materials51 (2006), No. 3, pp. 355–363Search in Google Scholar

19 H. S.Liu, C. L.Liu, C.Wang, Z. P.Jin, K.Ishida: Thermodynamic modeling of the Au-In-Sb ternary system, Journal of Electronic Materials32 (2003), No. 2, pp. 81–8810.1007/s11664-003-0240-xSearch in Google Scholar

20 C. T.Tsai, R. S.Williams: Solid phase equilibria in the Au-Ga-As, Au-Ga-Sb, Au-In-As and Au-In-Sb ternaries, Journal of Materials Research1 (1986), No. 2, pp. 352–36010.1557/JMR.1986.0352Search in Google Scholar

21 Wei-kaiLiou, Yee-WenYen: Phase equilibria of the Au-Sn-Zn ternary system and interfacial reactions in Sn-Zn/Au couples, Intermetallics17 (2009), No. 1–2, pp. 72–7810.1016/j.intermet.2008.10.001Search in Google Scholar

22 D.Manasijević, D.Minić, D.Živković, Ž.Živković: Experimental study and thermodynamic calculation of Au-Bi-Sb system phase equilibria, Journal of Physics and Chemistry of Solids69 (2008), No. 4, pp. 847–85110.1016/j.jpcs.2007.09.018Search in Google Scholar

23 D.Manasijević, D.Zivković, N.Talijan, V.Ćosović, L.Gomidželović, R.Todorović, D.Minić: Thermal analysis and thermodynamic prediction of phase equilibria in the ternary Au-Ga-Sb system, Journal of Physics and Chemistry of Solids74 (2013), No. 2, pp. 280–28510.1016/j.jpcs.2012.09.019Search in Google Scholar

24 V.Chidambaram, J.Hald, J.Hattel: Development of Au–Ge based candidate alloys as an alternative to high-lead content solders, Journal of Alloys and Compounds490 (2010), No. 1–2, pp. 170–17910.1016/j.jallcom.2009.10.108Search in Google Scholar

25 V.Chidambaram, J.Hald, J.Hattel: Development of gold based solder candidates for flip chip assembly, Microelectronics Reliability49 (2009), No. 3, pp. 323–33010.1016/j.microrel.2008.12.012Search in Google Scholar

26 J.Wang, C.Leinenbach, M.Roth: Thermodynamic description of the Au-Ge-Sb ternary system, Journal of Alloys and Compounds485 (2009), No. 1–2, pp. 577–58210.1016/j.jallcom.2009.06.030Search in Google Scholar

27 V.Chidambaram, J.Hattel, J.Hald: High-temperature lead-free solder alternatives, Microelectronic Engineering88 (2011), No. 6, pp. 981–98910.1016/j.mee.2010.12.072Search in Google Scholar

28 V.Chidambaram, J.Hattel, J.Hald: Design of lead-free candidate alloys for high-temperature soldering based on the Au-Sn system, Materials & Design31 (2010), No. 10, pp. 4638–464510.1016/j.matdes.2010.05.035Search in Google Scholar

29 J.Wang, C.Leinenbach, M.Roth: Thermodynamic modeling of the Au-Ge-Sn ternary system, Journal of Alloys and Compounds481 (2009), No. 1–2, pp. 830–83610.1016/j.jallcom.2009.03.114Search in Google Scholar

30 http://periodictable.com/Elements/051/data.html (2015-4-14)Search in Google Scholar

Published Online: 2015-08-31
Published in Print: 2015-09-01

© 2015, Carl Hanser Verlag, München

Articles in the same Issue

  1. Inhalt/Contents
  2. Inhalt
  3. Fachbeiträge/Technical Contributions
  4. Adhesive tensile testing of atmospheric plasma sprayed zinc coating on a 1.4301 substrate
  5. Fatigue strength of nodular cast iron with regard to heavy-wall applications
  6. Mechanical and corrosion properties of friction stir welded joints of Al-Cu alloy 2219-T87
  7. The effect of using heat treated ulexite and cashew in automotive friction materials
  8. Residual stress relaxation in welded large components
  9. Variation regulation of the acoustic emission energy parameter during the failure process of granite under uniaxial compression
  10. Iznik tiles: A new production technology and respective characterization
  11. Quality during milling of a glass fiber reinforced polymer composite
  12. Effect of abrasive water jet turning process parameters on surface roughness and material removal rate of AISI 1050 steel
  13. Influence of cutting parameters on the chip-tool interface temperature during the turning of Waspaloy
  14. Effects of the thixocasting injection velocity on tensile properties of an A357 Al alloy
  15. Solid mold investment casting – A replication process for open-cell foam metal production
  16. Design of an impact testing machine for polymer films by the free falling dart procedure
  17. Mechanical and electrical properties of Sb-Ga50Au10In40 alloys
  18. CFD simulation of particulate flow in a spiral concentrator
https://doi.org/10.3139/120.110780

Articles in the same Issue

  1. Inhalt/Contents
  2. Inhalt
  3. Fachbeiträge/Technical Contributions
  4. Adhesive tensile testing of atmospheric plasma sprayed zinc coating on a 1.4301 substrate
  5. Fatigue strength of nodular cast iron with regard to heavy-wall applications
  6. Mechanical and corrosion properties of friction stir welded joints of Al-Cu alloy 2219-T87
  7. The effect of using heat treated ulexite and cashew in automotive friction materials
  8. Residual stress relaxation in welded large components
  9. Variation regulation of the acoustic emission energy parameter during the failure process of granite under uniaxial compression
  10. Iznik tiles: A new production technology and respective characterization
  11. Quality during milling of a glass fiber reinforced polymer composite
  12. Effect of abrasive water jet turning process parameters on surface roughness and material removal rate of AISI 1050 steel
  13. Influence of cutting parameters on the chip-tool interface temperature during the turning of Waspaloy
  14. Effects of the thixocasting injection velocity on tensile properties of an A357 Al alloy
  15. Solid mold investment casting – A replication process for open-cell foam metal production
  16. Design of an impact testing machine for polymer films by the free falling dart procedure
  17. Mechanical and electrical properties of Sb-Ga50Au10In40 alloys
  18. CFD simulation of particulate flow in a spiral concentrator
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 9.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/120.110780/html?lang=en
Scroll to top button