Article
Licensed
Unlicensed
Requires Authentication
Contents
Published/Copyright:
March 24, 2017
Published Online: 2017-03-24
Published in Print: 2017-04-04
© 2017, Carl Hanser Verlag, München
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Inhalt/Contents
- Contents
- Fachbeiträge/Technical Contributions
- Characterization of residual stresses in austenitic disc springs induced by martensite formation during incremental forming using micromagnetic methods
- Effect of microstructure on high cycle fatigue behavior of high martensitic dual phase steels
- Prediction of residual stresses in electron beam welded Ti-6Al-4V plates
- Joining of dissimilar metals by diffusion bonding: Titanium alloy with aluminum
- Mechanical properties and microstructure of stir casted Al/B4C/garnet composites
- Comparative study of phase transformation temperatures in high strength steel weld metals
- Corrosion behavior of pipeline steel welds in simulated produced water with different CO2 partial pressures under high temperature
- Effect of Cloisite 30B nanoclay on the mechanical properties of HDPE nanocomposites
- Changes in mechanical properties and structure of electrolytic plasma treated × 12 CrNi 18 10 Ti stainless steel
- Effect of post-curing heat treatment on mechanical properties of fiber reinforced polymer (FRP) composites
- Performance monitoring of large rock-socketed piles by Brillouin fiber optic sensing
- Grundlegendes zur Steifigkeit von Werkstoffprüfmaschinen
- Grundlegendes zur Steifigkeit von Werkstoffprüfmaschinen
- Rationalization of energy consumption in the grinding of some ores by using additives
- Effect of machining characteristics of nano-TiC mixed dielectric fluids on Inconel 718 in the EDM process
Articles in the same Issue
- Inhalt/Contents
- Contents
- Fachbeiträge/Technical Contributions
- Characterization of residual stresses in austenitic disc springs induced by martensite formation during incremental forming using micromagnetic methods
- Effect of microstructure on high cycle fatigue behavior of high martensitic dual phase steels
- Prediction of residual stresses in electron beam welded Ti-6Al-4V plates
- Joining of dissimilar metals by diffusion bonding: Titanium alloy with aluminum
- Mechanical properties and microstructure of stir casted Al/B4C/garnet composites
- Comparative study of phase transformation temperatures in high strength steel weld metals
- Corrosion behavior of pipeline steel welds in simulated produced water with different CO2 partial pressures under high temperature
- Effect of Cloisite 30B nanoclay on the mechanical properties of HDPE nanocomposites
- Changes in mechanical properties and structure of electrolytic plasma treated × 12 CrNi 18 10 Ti stainless steel
- Effect of post-curing heat treatment on mechanical properties of fiber reinforced polymer (FRP) composites
- Performance monitoring of large rock-socketed piles by Brillouin fiber optic sensing
- Grundlegendes zur Steifigkeit von Werkstoffprüfmaschinen
- Grundlegendes zur Steifigkeit von Werkstoffprüfmaschinen
- Rationalization of energy consumption in the grinding of some ores by using additives
- Effect of machining characteristics of nano-TiC mixed dielectric fluids on Inconel 718 in the EDM process