Inhalt

Articles in the same Issue

1. Inhalt/Contents
2. Inhalt
3. Fachbeiträge/Technical Contributions
4. Burst Strength of Composite Cylinders – Assessment of the Type of Statistical Distribution
5. Effects of Zn/Cu Ratio and Silicon on Microstructure, Mechanical Properties, Tarnish and Corrosion Resistance of As-Cast 940 Silver Alloys
6. Analysis of the Frequency as an Integral Method for the Testing of Anisotropic 3D Sheet Metal Structure
7. Mechanical and Thermal Properties of a Cu-CNT Composite with Carbon Nanotubes Synthesized by CVD Process
8. The Mechanical and Electrical Properties of the Ternary Bi-Ga-Sb System
9. Experimental Investigation of the Corrosion Mechanism of Cemented Soils in Magnesium Sulfate Solution
10. Experimental and Analytical Study of Masonry Constructions Reinforced with Bed Joints
11. The Fracture Toughness of Fe₂B Formed on Boronized AISI 304
12. Effects of Ferroboron and Ferrochromium Powder Addition on Abrasive Wear Resistance of Fe-Based Hardfacing Coatings
13. Fabrication of Al/Mg Bimetal Compound Casting by Lost Foam Technique and Liquid-Solid Process
14. Effects of Si and Zn on Machinability and Wear Resistance of AZ91 and AS91 Magnesium Alloys
15. DIRECTT-Rekonstruktionen im Vergleich zur gefilterten Rückprojektion
16. Reduzierung von Missing-Wedge-Artefakten der CT mit DIRECTT
17. Röntgentomografische Untersuchung eines kommerziellen Lithium-Ionen-Kondensators*
18. Machining Parameter Optimization of Bidirectional CFRP Composite Pipe by Genetic Algorithm
19. Investigation of Lost Foam Casted Aluminum Bimetal Microstructures
20. Taguchi-Based Grey Relation Optimization of Machining Parameters and Cutting Path Strategies in CNC Pocket Milling Operations
21. Reliable Evaluation of Acceptability of Weld for Final Disposal Based on the Canister Copper Weld Inspection Using Different NDT Methods
22. Evaluation of the Reliability of NDTesting in Russian Railway Transport
23. Vorschau/Preview
24. Vorschau