Density of the systems (NaF/AlF3)—AlPO4 and (NaF/AlF3)—NaVO3
-
František Šimko
,
Iveta Macková
Abstract
The densities of two systems of molten mixtures (NaF/AlF3)—NaVO3 and (NaF/AlF3)—AlPO4 were measured using an Archimedean method. Each molten mixture contained varying amounts of “impurity” constituents. The measurements were performed at various NaF/AlF3 mole ratios (CR, cryolite ratio), equal to 3, 2.5, 2, and 1.5.
[1] Daněk, V., Silný, A., Lubiová, Ž., & Chrenková, M. (1995). Acidbase properties of aluminium electrolytes and the effect of different additives. In Proceedings of the VIIIth Al Symposium, Slovak-Norwegian Conference on Aluminium Smelting Technology, 24–27 September 1995 (pp. 13–20). Donovaly-Žiar nad Hronom, Slovakia. Search in Google Scholar
[2] Diep, Q. B. (1998). Structure and thermodynamics of cryolite-based melts with additions of Al2O3 and Fe2O3. Doctoral thesis, Norwegian University of Science and Technology, Trondheim, Norway. Search in Google Scholar
[3] Fernandez, R., & Østvold, T. (1989). Surface tension and density of molten fluorides and fluoride mixtures containing cryolite. Acta Chemica Scandinavica, 43, 151–159. DOI: 10.3891/acta.chem.scand.43-0151. http://dx.doi.org/10.3891/acta.chem.scand.43-015110.3891/acta.chem.scand.43-0151Search in Google Scholar
[4] Grjotheim, K., Krohn, M., Malinovsky, M., Matiašovský, K., & Thonstad, J. (1982). Aluminium electrolysis: Fundamentals of the Hall-Héroult process (2nd ed.). Düsseldorf, Germany: Aluminium-Verlag. Search in Google Scholar
[5] Jentoftsen, T. E. (2000). Behaviour of iron and titanium species in cryolite-alumina melts. Doctoral thesis, Norwegian University of Science and Technology, Trondheim, Norway. Search in Google Scholar
[6] Jentoftsen, T. E., Thonstad, J., Dewing, E. W., & Haarberg, G. M. (1999). Solubility of FeO and FeAl2O4 in cryolite-alumina melts. In H. C. De Long, S. Deki, G. R. Stafford, & P. C. Trulove (Eds.), Electrochemical Society Proceedings: Molten salts XII (Vol. 99-41, pp. 473–484). Pennington, NJ, USA: The Electrochemical Society. Search in Google Scholar
[7] Korenko, M. (2008). Interfacial tension between aluminum and cryolite alumina melts. Journal of Chemical and Engineering Data, 53, 794–797. DOI: 10.1021/je700652x. http://dx.doi.org/10.1021/je700652x10.1021/je700652xSearch in Google Scholar
[8] Korenko, M. (2007). Influence of sulphur impurities on the interfacial tension between aluminium and cryolite alumina melts. Zeitschrift für Naturforschung A, 62a, 309–314. 10.1515/zna-2007-5-612Search in Google Scholar
[9] Korenko, M., & Ondercin, M. (2006). Interfacial tension between aluminum and cryolite melts during electrolysis of the systems Na3AlF6-AlF3(NaF)-Al2O3. Journal of Applied Electrochemistry, 36, 1347–1352. DOI: 10.1007/s10800-006-9193-0. http://dx.doi.org/10.1007/s10800-006-9193-010.1007/s10800-006-9193-0Search in Google Scholar
[10] Kucharík, M., Šimko, F., Danielik, V., Boča, M., & Vasiljev, R. (2007). Thermal analysis of the system Na3AlF6-NAVO3. Monatshefte für Chemie, 138, 1211–1215. DOI: 10.1007/s00706-007-0709-z. http://dx.doi.org/10.1007/s00706-007-0709-z10.1007/s00706-007-0709-zSearch in Google Scholar
[11] Silný, A. (1990). Zariadenie na meranie hustoty kvapalín (The equipment for liquid density measurement). Sdělovací technika (Communication Technique), 38, 101–105. Search in Google Scholar
[12] Solli, P. A., Haarberg, T., Eggen, T., Skybakmoen, E., & Sterten, Å. (1994). A laboratory study of current efficiency in cryolitic melts. In Light Metals: Proceedings of the 123rd TMS Annual Meeting, 27 February–3 March 1994, San Francisco, CA, USA (pp. 195–203). Warrendale, PA, USA: The Minerals, Metals & Materials Society (TMS). Search in Google Scholar
[13] Sterten, Å (1991). Redox reactions and current loss in aluminum reduction cells. In: Light Metals: Proceedings of the 120th TMS Annual Meeting, 17–21 February 1991, New Orleans, LA, USA (pp. 445–451). Warrendale, PA, USA: The Minerals, Metals & Materials Society (TMS). Search in Google Scholar
[14] Sterten, Å, Solli, P. A., & Skybakmoen, E. (1998). Influence of electrolyte impurities on current efficiency in aluminium electrolysis cells. Journal of Applied Electrochemistry, 28, 781–789. DOI: 10.1023/A:1003425901393. http://dx.doi.org/10.1023/A:100342590139310.1023/A:1003425901393Search in Google Scholar
[15] Thonstad, J., Fellner, P., Haarberg, G. M., Híveš, J., Kvande, H., & Sterten, Å (2001). Aluminium electrolysis: Fundamentals of the Hall-Héroult process (3rd ed.). Düsseldorf, Germany: Aluminium-Verlag. Search in Google Scholar
© 2010 Institute of Chemistry, Slovak Academy of Sciences
Articles in the same Issue
- Application of polyaniline as an efficient and novel adsorbent for azo dyes removal from textile wastewaters
- Enzymatic synthesis and analytical monitoring of terpene ester by 1H NMR spectroscopy
- Effect of fiber modification with carboxymethyl cellulose on the efficiency of a microparticle flocculation system
- Synthesis, crystal structure, and thermal analysis of a copper(II) complex with imidazo[4,5-f]1,10-phenantroline
- Hydrothermal synthesis of core-shell structured PS@GdPO4:Tb3+/Ce3+ spherical particles and their luminescence properties
- Optical characterisation of organosilane-modified nanocrystalline diamond films
- Synthesis, optical, and spectroscopic characterisation of substituted 3-phenyl-2-arylacrylonitriles
- A new group of potential antituberculotics: N-(2-pyridylmethyl)salicylamides and N-(3-pyridylmethyl)salicylamides
- Synthesis and antimicrobial properties of new 2-((4-ethylphenoxy)methyl)benzoylthioureas
- Synthesis, characterisation, and biological activity of three new amide prodrugs of lamotrigine with reduced hepatotoxicity
- Comparative study of CTAB adsorption on bituminous coal and clay mineral
- Density of the systems (NaF/AlF3)—AlPO4 and (NaF/AlF3)—NaVO3
- Semiquinol and phenol compounds from seven Senecio species
- Determination of the enthalpy of fusion of K3NbO2F4
Articles in the same Issue
- Application of polyaniline as an efficient and novel adsorbent for azo dyes removal from textile wastewaters
- Enzymatic synthesis and analytical monitoring of terpene ester by 1H NMR spectroscopy
- Effect of fiber modification with carboxymethyl cellulose on the efficiency of a microparticle flocculation system
- Synthesis, crystal structure, and thermal analysis of a copper(II) complex with imidazo[4,5-f]1,10-phenantroline
- Hydrothermal synthesis of core-shell structured PS@GdPO4:Tb3+/Ce3+ spherical particles and their luminescence properties
- Optical characterisation of organosilane-modified nanocrystalline diamond films
- Synthesis, optical, and spectroscopic characterisation of substituted 3-phenyl-2-arylacrylonitriles
- A new group of potential antituberculotics: N-(2-pyridylmethyl)salicylamides and N-(3-pyridylmethyl)salicylamides
- Synthesis and antimicrobial properties of new 2-((4-ethylphenoxy)methyl)benzoylthioureas
- Synthesis, characterisation, and biological activity of three new amide prodrugs of lamotrigine with reduced hepatotoxicity
- Comparative study of CTAB adsorption on bituminous coal and clay mineral
- Density of the systems (NaF/AlF3)—AlPO4 and (NaF/AlF3)—NaVO3
- Semiquinol and phenol compounds from seven Senecio species
- Determination of the enthalpy of fusion of K3NbO2F4
