Production of potassium sulfate from potassium hydrosulfate solutions using alcohols
-
Agnieszka Mientka
,
Barbara Grzmil
Abstract
Potassium sulfate is used to produce multicomponent fertilizers, free of chlorides. The desalting out of potassium sulfate from an aqueous solution of potassium hydrosulfate was conducted using 40 mass %, 45 mass %, or 50 mass % aqueous solutions of either methanol or propan-2-ol. Composition of the resultant precipitate was analyzed using chemical methods and XRD analysis. The results of the XRD analysis revealed that the main precipitate phase is K2SO4. Small amounts of K5H3(SO4)4 were detected when the desalting out was carried out from 2.5 M KHSO4 solution using 40 mass % and 50 mass % methanol solution. When the amount of potassium bisulfate in the solution increased to 3.5 M and 3.8 M, the main phase consisted of K3H(SO4)2. Generally, the desalting out process using propan-2-ol caused the formation of K3H(SO4)2. Potassium sulfate was obtained only by desalting out the 2.5 M KHSO4 solution using 50 mass % aqueous propan-2-ol.
[1] Abu-Eishah, S. I., Bani-Kananeh, A. A., & Allawzi, M. A. (2000). K2SO4 production via the double decomposition reaction of KCl and phosphogypsum. Chemical Engineering Journal, 76, 197–207. DOI: 1016/S1385-894(99)00158-8. http://dx.doi.org/10.1016/S1385-8947(99)00158-810.1016/S1385-8947(99)00158-8Suche in Google Scholar
[2] Efraim, I., Holdengraber, C., & Lampert, S. (1996). U. S. Patent No. 5552126, Washington, D.C.: U.S. Patent and Trademark Office. Suche in Google Scholar
[3] Giambra, M. A. (2005), Application of ion chromatography to qualitative and quantitative determination of the main inorganic ionic components of samples from a production process of potassium sulphate. Analytica Chimica Acta, 530, 41–48. DOI: 10.1016/J.ACA.2004.08.047. http://dx.doi.org/10.1016/j.aca.2004.08.04710.1016/j.aca.2004.08.047Suche in Google Scholar
[4] Poradnik fizykochemiczny, (1974) Warszawa: WNT. Suche in Google Scholar
[5] Hermanowicz, W., Dojlido, J., Zerbe, J., Dożańska, W., & Koziorowski, B. (1999), Fizyczno-chemiczne badanie wody i ścieków. Warszawa: Wydawnictvo Arkady. Suche in Google Scholar
[6] Jannet, D. B., M’nif, A., & Rokbani R. (2004). Natural brine valorisation: Application of the system K+, Mg2+/Cl−, SO 42−//H2O at 25°C observations on kinetics formation of K2SO4 and K2SO4 · MgSO4 · 6H2O. Desalination, 167, 319–326. DOI: 10.1016/j.desal.2004.06.141. http://dx.doi.org/10.1016/j.desal.2004.06.14110.1016/j.desal.2004.06.141Suche in Google Scholar
[7] Khlissa, F., M’nif, A., & Rokbani, R. (2004). Application of the conductimetry to the study of the transformation of KCl and Na2SO4 into K2SO4 between 5 and 30 °C. Chemical Engineering and Processing, 43, 929–934. DOI: 10.1016/j.cep.2003.08.002. http://dx.doi.org/10.1016/j.cep.2003.08.00210.1016/j.cep.2003.08.002Suche in Google Scholar
[8] Mullin, J. W., Teodossiev, N., & Söhnel, O. (1989). Potassium sulphate precipitation from aqueous solution by salting-out with acetone. Chemical Engineering and Processing, 26, 93–99. DOI: 10.1016/0255-2701(89)90001-9. http://dx.doi.org/10.1016/0255-2701(89)90001-910.1016/0255-2701(89)90001-9Suche in Google Scholar
[9] Taboada, M. E., Palma, P. A., & Graber, T. A. (2003). Crystallization of potassium sulfate by cooling and salting-out using 1-propanol in a calorimetric reactor. Crystal Research and Technology, 38, 21–29. DOI: 10.1002/crat.200310002. http://dx.doi.org/10.1002/crat.20031000210.1002/crat.200310002Suche in Google Scholar
[10] Zisner, T., Holdengraber, C., & Lampert, S. (1996). U. S. Patent No. 5549876. Washington, D.C.: U.S. Patent and Trademark Office. Suche in Google Scholar
© 2008 Institute of Chemistry, Slovak Academy of Sciences
Artikel in diesem Heft
- Photocatalytic reduction of CO2 over TiO2 based catalysts
- Modeling of enzymatic reaction in an airlift reactor using an axial dispersion model
- Hydrolysis of titanium sulphate compounds
- Mathematical modelling of selected characterisation procedures for oil fractions
- High gravity batch and continuous processes for beer production: Evaluation of fermentation performance and beer quality
- Liquid-liquid equilibria of butyric acid for solvents containing a phosphonium ionic liquid
- HAZOP study of a fixed bed reactor for MTBE synthesis using a dynamic approach
- Influence of the reactive distillation column configuration on its performance: A computational study
- Reactive distillation — experimental data for propyl propionate synthesis
- Mixing time of a non-Newtonian liquid in an unbaffled agitated vessel with an eccentric propeller
- Heat transfer coefficient and pressure drop during refrigerant R-134a condensation in a plate heat exchanger
- Pore structure of pyrolyzed scrap tires
- Distribution of local heat transfer coefficient values in the wall region of an agitated vessel
- Chemical pretreatment of feed water for membrane distillation
- Selective methane oxidation to formaldehyde using polymorphic T-, M-, and H-forms of niobium(V) oxide as catalysts
- Validation of the Tessier scheme for speciation of metals in soil using the Bland and Altman test
- Production of potassium sulfate from potassium hydrosulfate solutions using alcohols
Artikel in diesem Heft
- Photocatalytic reduction of CO2 over TiO2 based catalysts
- Modeling of enzymatic reaction in an airlift reactor using an axial dispersion model
- Hydrolysis of titanium sulphate compounds
- Mathematical modelling of selected characterisation procedures for oil fractions
- High gravity batch and continuous processes for beer production: Evaluation of fermentation performance and beer quality
- Liquid-liquid equilibria of butyric acid for solvents containing a phosphonium ionic liquid
- HAZOP study of a fixed bed reactor for MTBE synthesis using a dynamic approach
- Influence of the reactive distillation column configuration on its performance: A computational study
- Reactive distillation — experimental data for propyl propionate synthesis
- Mixing time of a non-Newtonian liquid in an unbaffled agitated vessel with an eccentric propeller
- Heat transfer coefficient and pressure drop during refrigerant R-134a condensation in a plate heat exchanger
- Pore structure of pyrolyzed scrap tires
- Distribution of local heat transfer coefficient values in the wall region of an agitated vessel
- Chemical pretreatment of feed water for membrane distillation
- Selective methane oxidation to formaldehyde using polymorphic T-, M-, and H-forms of niobium(V) oxide as catalysts
- Validation of the Tessier scheme for speciation of metals in soil using the Bland and Altman test
- Production of potassium sulfate from potassium hydrosulfate solutions using alcohols
