Startseite CFD Multifluid Simulation of Spouted Beds with and without Internal Draft Tubes
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

CFD Multifluid Simulation of Spouted Beds with and without Internal Draft Tubes

  • Mahmood Reza Rahimi und Salar Azizi
Veröffentlicht/Copyright: 14. März 2011
Veröffentlichen auch Sie bei De Gruyter Brill

The insertion of an axially positioned non-porous and porous draft tube into the conventional spouted bed has shown potential advantages in stability and flexibility of the system and controlling particle trajectory history. In this work with computational fluid dynamics (CFD), important information on the flow field within three types of spouted bed has been provided and influences of using internal tube on spouted beds hydrodynamics were investigated. The simulation used the multi-fluid Eulerian-Eulerian approach based on kinetic theory of granular flows (KTGF), incorporating a kinetic-frictional constitutive model for dense assemblies of particulate solids and Gidaspow’s drag model for the interaction between gas and particles. Finally, the modeling results were compared with the experimental data from literature.

Published Online: 2011-3-14

©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston

Artikel in diesem Heft

  1. Article
  2. Controllability of Distillation Sequences for the Separation of Ternary Mixture
  3. Model Order Reduction and the Heat Transfer Modelling of a Heat Exchanger by Using Artificial Neural Approach
  4. Polyhedral Particles Hopper Flowrate Predictions using Discrete Element Method
  5. Microfluidics of Nanodrug Delivery: Effect of Reynolds Number Ratio and Particle Size
  6. CFD Simulation of Water Gas Shift Membrane Reactor--Pressure Effects on the Performance of the Reactor
  7. Simulation of an Industrial Linear Low Density Polyethylene Plant
  8. Wet Gas Measurement with Slotted Orifice Meter--Effect of Geometry of Slots and Pressure
  9. Modeling of a Fixed-Bed Reactor for the Production of Phthalic Anhydride
  10. Nonlinear Modeling for the Degradation of Aqueous Azo Dyes by Combined Advanced Oxidation Processes Using Artificial Neural Networks
  11. Selection of Suitable Turbulence Models for Numerical Modelling of Hydrocyclones
  12. A Hybrid Model of Solvent Hehydratic Distillation Column Based on Mechanism and LS-SVM
  13. Heterogeneous Model of the Process of Clavulanic Acid Purification by Ionic Exchange in a Fixed-Bed Column
  14. Coarse-Grained Molecular Dynamics Simulation of Lysozyme Protein Crystals
  15. Coupling Swelling and Water Retention Processes in Compacted Bentonite
  16. Adaptive Feedback Linearization Control of SISO Nonlinear Processes Using a Self-Generating Neural Network-Based Approach
  17. Solid-Liquid Equilibrium of Xylose in Water and Ethanol/Water Mixture
  18. Simulation of Hydrodesulfurization Trickle Bed Reactor
  19. Modeling Traffic-Emitted Ultrafine Particle Concentration and Intake Fraction in Corpus Christi, Texas
  20. Optimum Acetone and Ethanol Extraction of Polyphenols from Pinus caribaea Bark: Maximizing Tannin Content Using Response Surface Methodology
  21. Modeling of Thin Layer Drying of Banana (Nendran Spp) under Microwave, Convective and Combined Microwave-Convective Processes
  22. Structured Model of VERO Cells Metabolism in a Fixed-Bed Bioreactor
  23. Modified Solution Approach in Modeling of Separation of Gaseous Hydrocarbons using Nanostructure MFI Zeolite Membranes with M-S Formulation and DSL and IAST Assumptions
  24. Segregated Model of Adherent Cell Culture in a Fixed-Bed Bioreactor
  25. Optimization of Cellulase Production Using Agricultural Wastes by Artificial Neural Network and Genetic Algorithm
  26. CFD Multifluid Simulation of Spouted Beds with and without Internal Draft Tubes
  27. Modeling of Urea Release from Briquettes Using Semi infinite and Shrinking Core Models
  28. Modeling and Optimization of Process Parameters by Taguchi Method: Degradation of Phenolic Compounds by UV/H2O2/TiO2 Process
  29. Hydrodynamic Investigation in an Annular Reactor with Mixing Time and Residence Time Distribution: Flow Rates Estimation with the Gauss-Newton Gradient Technique
  30. Prediction and Validation of Carbon Dioxide Gas Solubility in Ionic Liquids at T=298K and Atmospheric Pressure using Quantum Chemical Approach
  31. Computational Fluid Dynamics Characterization of a Bioreactor Mixing Device for the Animal Cell Culture
  32. CFD Modelling of Global Mixing Parameters in a Peirce-Smith Converter with Comparison to Physical Modelling
  33. Pseudo-Dynamic Modeling to Evaluate a Remote Gas-to-Liquids Process
  34. Fast Pyrolysis of Biomass in Bubbling Fluidized Bed: A Model Study
  35. Numerical Analysis and Optimization of Oxygen Separation from Air via Pressure Swing Adsorption
  36. Comparing Usage of Temperature Control and Composition Control for Reactive Distillation Column in Methyl Ester Production
  37. Study of the Particle Separation Performance of a Dust-settling Hopper
  38. Review
  39. A Survey of Data Treatment Techniques for Soft Sensor Design
  40. Inorganic Membranes for Hydrogen Production from the Water-Gas Shift Reaction: Materials, Reactor Design, and Simulation
  41. Short Communication
  42. A Note on a Double Temperature-Cascade Control Strategy for Distillation Columns
Heruntergeladen am 8.9.2025 von https://www.degruyterbrill.com/document/doi/10.2202/1934-2659.1559/html
Button zum nach oben scrollen