Home Modeling of a Fixed-Bed Reactor for the Production of Phthalic Anhydride
Article
Licensed
Unlicensed Requires Authentication

Modeling of a Fixed-Bed Reactor for the Production of Phthalic Anhydride

  • Amir Rahimi and Sogand Hamidi
Published/Copyright: November 6, 2011
Become an author with De Gruyter Brill

In this study, the performance of a fixed–bed tubular reactor for the production of phthalic anhydride is mathematically analyzed. The conversion degree and reactor temperature values are compared with the measured one in a tubular reactor applied in Farabi petrochemical unit in Iran as well as reported data in the literature for a pilot plate. The comparisons are satisfactory. The effects of some operating parameters including reactor length, feed temperature, reactor pressure, and existence of an inert in the catalytic bed are investigated. The optimum value of each parameter is determined on the basis of the corresponding operating conditions.

Published Online: 2011-11-6

©2012 Walter de Gruyter GmbH & Co. KG, Berlin/Boston

Articles in the same Issue

  1. Article
  2. Controllability of Distillation Sequences for the Separation of Ternary Mixture
  3. Model Order Reduction and the Heat Transfer Modelling of a Heat Exchanger by Using Artificial Neural Approach
  4. Polyhedral Particles Hopper Flowrate Predictions using Discrete Element Method
  5. Microfluidics of Nanodrug Delivery: Effect of Reynolds Number Ratio and Particle Size
  6. CFD Simulation of Water Gas Shift Membrane Reactor--Pressure Effects on the Performance of the Reactor
  7. Simulation of an Industrial Linear Low Density Polyethylene Plant
  8. Wet Gas Measurement with Slotted Orifice Meter--Effect of Geometry of Slots and Pressure
  9. Modeling of a Fixed-Bed Reactor for the Production of Phthalic Anhydride
  10. Nonlinear Modeling for the Degradation of Aqueous Azo Dyes by Combined Advanced Oxidation Processes Using Artificial Neural Networks
  11. Selection of Suitable Turbulence Models for Numerical Modelling of Hydrocyclones
  12. A Hybrid Model of Solvent Hehydratic Distillation Column Based on Mechanism and LS-SVM
  13. Heterogeneous Model of the Process of Clavulanic Acid Purification by Ionic Exchange in a Fixed-Bed Column
  14. Coarse-Grained Molecular Dynamics Simulation of Lysozyme Protein Crystals
  15. Coupling Swelling and Water Retention Processes in Compacted Bentonite
  16. Adaptive Feedback Linearization Control of SISO Nonlinear Processes Using a Self-Generating Neural Network-Based Approach
  17. Solid-Liquid Equilibrium of Xylose in Water and Ethanol/Water Mixture
  18. Simulation of Hydrodesulfurization Trickle Bed Reactor
  19. Modeling Traffic-Emitted Ultrafine Particle Concentration and Intake Fraction in Corpus Christi, Texas
  20. Optimum Acetone and Ethanol Extraction of Polyphenols from Pinus caribaea Bark: Maximizing Tannin Content Using Response Surface Methodology
  21. Modeling of Thin Layer Drying of Banana (Nendran Spp) under Microwave, Convective and Combined Microwave-Convective Processes
  22. Structured Model of VERO Cells Metabolism in a Fixed-Bed Bioreactor
  23. Modified Solution Approach in Modeling of Separation of Gaseous Hydrocarbons using Nanostructure MFI Zeolite Membranes with M-S Formulation and DSL and IAST Assumptions
  24. Segregated Model of Adherent Cell Culture in a Fixed-Bed Bioreactor
  25. Optimization of Cellulase Production Using Agricultural Wastes by Artificial Neural Network and Genetic Algorithm
  26. CFD Multifluid Simulation of Spouted Beds with and without Internal Draft Tubes
  27. Modeling of Urea Release from Briquettes Using Semi infinite and Shrinking Core Models
  28. Modeling and Optimization of Process Parameters by Taguchi Method: Degradation of Phenolic Compounds by UV/H2O2/TiO2 Process
  29. Hydrodynamic Investigation in an Annular Reactor with Mixing Time and Residence Time Distribution: Flow Rates Estimation with the Gauss-Newton Gradient Technique
  30. Prediction and Validation of Carbon Dioxide Gas Solubility in Ionic Liquids at T=298K and Atmospheric Pressure using Quantum Chemical Approach
  31. Computational Fluid Dynamics Characterization of a Bioreactor Mixing Device for the Animal Cell Culture
  32. CFD Modelling of Global Mixing Parameters in a Peirce-Smith Converter with Comparison to Physical Modelling
  33. Pseudo-Dynamic Modeling to Evaluate a Remote Gas-to-Liquids Process
  34. Fast Pyrolysis of Biomass in Bubbling Fluidized Bed: A Model Study
  35. Numerical Analysis and Optimization of Oxygen Separation from Air via Pressure Swing Adsorption
  36. Comparing Usage of Temperature Control and Composition Control for Reactive Distillation Column in Methyl Ester Production
  37. Study of the Particle Separation Performance of a Dust-settling Hopper
  38. Review
  39. A Survey of Data Treatment Techniques for Soft Sensor Design
  40. Inorganic Membranes for Hydrogen Production from the Water-Gas Shift Reaction: Materials, Reactor Design, and Simulation
  41. Short Communication
  42. A Note on a Double Temperature-Cascade Control Strategy for Distillation Columns
Downloaded on 8.9.2025 from https://www.degruyterbrill.com/document/doi/10.2202/1934-2659.1626/html
Scroll to top button