Sorption of Cr(VI) onto Cystoseira indica: Comparison of Regression Methods for Isotherms and Biomass Minimization

Artikel in diesem Heft

1. Article
2. Dynamic Model for Polyethylene Production in a Multizone Circulating Reactor
3. Investigation and Modeling of Splashing in the Peirce Smith Converter
4. A Modeling and Optimization Tool for the Expandable Polystyrene Batch Process
5. Performance of Statistical Process Control Tools under Different Plant Operation Strategies
6. Influence of Vortex-Finder Diameter on Axial Gas Flow in Simple Cyclone
7. Optimization of a Continuous Process for the Recovery of Lactic Acid Using Differential Evolution Algorithm
8. Phase Equilibria for Heterogeneous Azeotropic Distillation
9. Dynamic Behaviour of Thermally Coupled Distillation Arrangements: Effect of the Interconnection Flowrate
10. New Mathematical Model of Solar Flux Radiation for Double-Pitched Roof Surface
11. Fluid Catalytic Cracking Riser Modeling in Heat Transfer Mode
12. Modelling Tribological Performance of Bodymaker Lubricants
13. Comparing Pressure Flow Solvers for Dynamic Process Simulation
14. Oil Production Optimization in Petroleum Reservoirs by Ant Algorithm
15. Prediction of Nanofiltration Performance by Using Membrane Transport Models for the Separation of Nickel Salts from Aqueous Solutions
16. Comparative Study on the Kinetic Modeling of the Oxidative Coupling of Methane in Laboratory and Bench Scales
17. Numerical Solution of Non-Linear Algebraic Equations by Modified Genetic Algorithm
18. Transport in Highly Heterogeneous Porous Media: From Direct Simulation to Macro-Scale Two-Equation Models or Mixed Models
19. Design and Optimization of a Filter Based on Artificial Neural Network Applied to a Distillation Column
20. Simulation Model of the Thermodynamic Cycle of a Three-Cylinder Double-Acting Steam Engine
21. Novel MILP Models for Scheduling Permutation Flowshops
22. Modeling of Heat Transfer Augmentation in a Circular Tube Fitted with Right-Left Helical Inserts in Laminar Flow Using CFD
23. Reliability of Convective Diffusion Process in Stenosis Blood Vessels
24. Comparative Control Study of a High-Purity Ternary Batch Distillation
25. Synchronizing Field and Control-Room Operators for Process Operating Transients
26. Prediction of Various Parameters of a River for Assessment of Water Quality by an Intelligent Technique
27. Studies of Chromium Removal from Tannery Effluents by Dead Streptomyces Rimosus
28. Nonlinear Exponential Estimator Design for a Distillation Column
29. A Quantitative Structure-Activity Relationship Model
30. Modeling and Simulation of Aluminum Nanoparticle Synthesis by the Evaporation-Condensation Process Using the Nodal Method
31. Pre-Design of a Continuous Intensified Reactor Based on Pure Thermo-Chemical Optimisation
32. An Alternative Process for Butanol Production: Continuous Flash Fermentation
33. Development of a Heat Transfer Coefficient Model via Experimental Validation
34. Improving the Maximum Conversion of Ethanol Esterification
35. Novel Macrokinetic Model for Industrial Hydrogenation Purifying of Terephthalic Acid
36. Correlation of Activity Coefficients in Aqueous Solutions of Ammonium Salts Using Local Composition Models and Stochastic Optimization Methods
37. Modeling, Simulation and Experimental Study of Methanol Synthesis for ¹¹C Radiopharmaceuticals
38. Modeling and Simulation of Noncatalytic Gas-Solid Reaction in a Moving Bed Reactor
39. Multiscale Model of the GaAs MOVPE Process for the Fast Numerical Simulation
40. Computational Fluid Dynamics Study on the Decomposition of Ammonia in a Selective Porous Membrane
41. Modeling the Effect of Temperature on Propylene Conversion during Warm-Up in a Monolithic Converter
42. Prediction of Bivariate Molecular Property Distributions in Free-Radical Polymerization Systems Using Monte Carlo and Sectional Grid Methods
43. Numerical Analysis of Macro-Instability Characteristic in a Stirred Tank by Means of Large Eddy Simulations: Off-Bottom Clearance Effect
44. Prediction of Double Retrograde Vaporization by Hybrid Global-Local Optimization Using Fuzzy Clustering Means
45. Development of Rigorous and Reduced Heterogeneous Dynamic Models for Fixed Bed Catalytic Reactor and Three-Phase Catalytic Slurry Reactor
46. Inferential Control of a Distillation Column Using an Online Estimator
47. Integrated Process and Control System Model for Product Quality Control - Application to a Polypropylene Plant
48. The Dynamics of Liquid Cooling in Half-Coil Jackets
49. Design of Cost Optimal and Environmentally Conscious Phosphoric Acid Production Processes under Uncertainty
50. An Artificial Intelligence Software-Based Controller for Temperature Control of a Partially Simulated Chemical Reactor System
51. Artificial Neural Network Model with Parameter Tuning Assisted by Differential Evolution Technique: Study of Pressure Drop of Slurry Flow in Pipeline
52. Correlation of the Transport Properties for the Ethanol-Water System Using Neural Networks
53. Process Modeling and Optimization Strategies Integrating Support Vector Regression and Differential Evolution: A Study of Industrial Ethylene Oxide Reactor
54. Sorption of Cr(VI) onto Cystoseira indica: Comparison of Regression Methods for Isotherms and Biomass Minimization
55. Calculation of Kinetic Parameters and Active Sites Concentration for a New Multiple Site Model in Bulk Propylene Polymerization with the MgCl -Supported Ziegler-Natta Catalyst Using the Genetic Algorithm Method
56. Short Communication
57. Finite Element Simulation of Rough Rice Kernel (Oryza sativa L.) cv. Fajer Drying
58. Dynamic Simulation of Phenol Biodegradation in a Fluidized Bed Bioreactor Using Genetic Algorithm Trained Neural Network
59. Review
60. Process Simulation for Pulp and Paper Industries: Current Practice and Future Trend
61. Thermodynamics and the Simulation Engineer
62. Finite Element Modeling of Viscous Mixing: A Review