Identification of External Power System Linear Dynamic Equivalents as MIMO Feedback Blocks for the Study System
-
, , and
The necessity of dynamic equivalents for power system analysis has been well known since the expansion of large interconnected power networks, and has been discussed during the last decades. The present paper proposes a new method for constructing dynamic equivalents of power systems. In this method, at the first step the ``study system" is modeled completely via a single machine-infinite bus modeling procedure. Then the ``external system" is identified as a MIMO feedback block of this model in such a manner that can include dynamic effects of the latter on the behavior of the former. The method is successfully experimented on a part of the Iranian southern network.
©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston
Articles in the same Issue
- Article
- A Novel Load Compensation Algorithm under Unbalanced and Distorted Supply Voltages
- A New Linear Fractional Transformation Based Approach to Power System Robustness Analysis
- Electric Load Management Using Electricity Tariff Algorithm
- Synchronous Generators Modeling and Control Using the Framework of Individual Channel Analysis and Design: Part 1
- Extended Delta Based 15-Phase AC-DC Converter for Variable Frequency Induction Motor Drives
- Identification of External Power System Linear Dynamic Equivalents as MIMO Feedback Blocks for the Study System
- Novel Configuration of 60-Pulse Voltage Source Converter for STATCOM Application
Articles in the same Issue
- Article
- A Novel Load Compensation Algorithm under Unbalanced and Distorted Supply Voltages
- A New Linear Fractional Transformation Based Approach to Power System Robustness Analysis
- Electric Load Management Using Electricity Tariff Algorithm
- Synchronous Generators Modeling and Control Using the Framework of Individual Channel Analysis and Design: Part 1
- Extended Delta Based 15-Phase AC-DC Converter for Variable Frequency Induction Motor Drives
- Identification of External Power System Linear Dynamic Equivalents as MIMO Feedback Blocks for the Study System
- Novel Configuration of 60-Pulse Voltage Source Converter for STATCOM Application