A Novel Load Compensation Algorithm under Unbalanced and Distorted Supply Voltages
-
K. Karthikeyan
In this paper, a novel control algorithm is proposed to compensate the unbalanced and non-linear loads in a three-phase four-wire system using active power filters. The algorithm results in balanced and sinusoidal source currents under unbalanced and distorted three-phase supply voltages. The algorithm makes use of the positive sequence extraction of the supply voltage and the theory of instantaneous symmetrical components. To illustrate the concept, a three-phase four-wire system with unbalanced and non-linear load is considered for compensation. The detailed simulation and experimental results are presented to validate the proposed method.
©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston
Articles in the same Issue
- Article
- A Novel Load Compensation Algorithm under Unbalanced and Distorted Supply Voltages
- A New Linear Fractional Transformation Based Approach to Power System Robustness Analysis
- Electric Load Management Using Electricity Tariff Algorithm
- Synchronous Generators Modeling and Control Using the Framework of Individual Channel Analysis and Design: Part 1
- Extended Delta Based 15-Phase AC-DC Converter for Variable Frequency Induction Motor Drives
- Identification of External Power System Linear Dynamic Equivalents as MIMO Feedback Blocks for the Study System
- Novel Configuration of 60-Pulse Voltage Source Converter for STATCOM Application
Articles in the same Issue
- Article
- A Novel Load Compensation Algorithm under Unbalanced and Distorted Supply Voltages
- A New Linear Fractional Transformation Based Approach to Power System Robustness Analysis
- Electric Load Management Using Electricity Tariff Algorithm
- Synchronous Generators Modeling and Control Using the Framework of Individual Channel Analysis and Design: Part 1
- Extended Delta Based 15-Phase AC-DC Converter for Variable Frequency Induction Motor Drives
- Identification of External Power System Linear Dynamic Equivalents as MIMO Feedback Blocks for the Study System
- Novel Configuration of 60-Pulse Voltage Source Converter for STATCOM Application