Startseite Naturwissenschaften Electroplating/electrodissolution/recovery cycle for rhodium target used for an industrial scale cyclotron production of palladium-l03
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Electroplating/electrodissolution/recovery cycle for rhodium target used for an industrial scale cyclotron production of palladium-l03

  • Mahdi Sadeghi , Hossein Afarideh , Gholamreza Raisali und P. van den Winkel
Veröffentlicht/Copyright: 25. September 2009

Summary

Electrodeposition of rhodium metal on a copper backing was performed in acidic sulfate media using RhCl3 · 3 H2O, Rh2(SO4)3 (recovered from hydrochloric acid solution) and also the commercially available Rhodex plating baths. This work describes the development of a high current density (2.4 A·cm-2) electrodissolution system that allows solubilisation of rhodium fragments, powder and pieces of foils and wires in the presence of hydrochloric and chlorine gas. Solvent-solvent extraction of no-carrier-added 103Pd from the irradiated rhodium target with a-furyldioxime into chloroform under the influence of hydrochloric acid concentration was investigated. The extraction yield was 85.3% for a single extraction with 0.37 M HCl, and 103Pd was more than 99% pure.

Published Online: 2009-9-25
Published in Print: 2006-4-1

© by Oldenbourg Wissenschaftsverlag, München

Heruntergeladen am 16.12.2025 von https://www.degruyterbrill.com/document/doi/10.1524/ract.2006.94.4.217/pdf
Button zum nach oben scrollen