Startseite Effects of heat treatment on some magnetic properties of amorphous alloys containing (Fe–Ni)1−x M x (M = Si, B)
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effects of heat treatment on some magnetic properties of amorphous alloys containing (Fe–Ni)1−x M x (M = Si, B)

  • Nurlan Rafiyev ORCID logo EMAIL logo
Veröffentlicht/Copyright: 24. Juni 2022

Abstract

Herein, the effect of various treatment modes on the magnetic properties of amorphous alloys Fe49Ni29Si9B13 and Fe59Ni19Si9B13 obtained by melt spinning was considered. Samples from both alloys were heat-treated separately in the magnetic field and without the field. An increase in soft magnetic properties was detected during the transition to the crystalline phase (Hc = 0.63Oe, Bm = 1.55T, Br = 2.16T). It was determined that the soft magnetic properties of materials disappear with the formation of crystalline phases. The obtained materials were applied by replacing the electrical steel in the core of the LC1E2501 contactor produced by Schneider. During the operation, the result was 7% higher than the plant resource.


Corresponding author: Nurlan Rafiyev, Azerbaijan University of Architecture and Construction, Baku, AZ1073 Azerbaijan, E-mail:

  1. Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.

  2. Research funding: None declared.

  3. Conflict of interest statement: The authors declare no conflicts of interest regarding this article.

References

[1] B. A. Kornienkov, M. A. Libman, B. V. Molotilov, and D. I. Kadyshev, Anomalous Magnetic Changes in Amorphous Fe–Ni–Si–B Alloy, vol. 27, Moscow, Russia, Pleiades Publishing, Ltd., 2013, pp. 217–220.10.1134/S0031918X1212006XSuche in Google Scholar

[2] K. Gruszka, M. Nabialek, and M. Szota, “Analysis of the thermal and magnetic properties of amorphous Fe61Co10Zr2.5 Hf2.5 Me2w2b20 (where Me Mo, Nb, Ni ORY) ribbons,” Arch. Metall. Mater., vol. 61, no. 2, pp. 641–642, 2016. https://doi.org/10.1515/amm-2016-0109.Suche in Google Scholar

[3] B. Zhang, E. Fenineche, H. Liao, and C. Coddet. Microstructure and magnetic properties of Fe–Ni alloy fabricated by selective laser melting Fe/Ni mixed powders. J. Mater. Sci. Technol., vol. 29, no. 8, pp. 757–760, 2013.10.1016/j.jmst.2013.05.001Suche in Google Scholar

[4] K. Gruszka, M. Nabiałek, M. Szota, et al., “Analysis of the thermal and magnetic properties of amorphous Fe61Co10Zr2.5Hf2.5Me2W2B20 (where Me = Mo, Nb, Ni or Y) ribbons,” J. Mizera/Arch. Metall. Mater., vol. 61, no. 2, pp. 643–644, 2016. https://doi.org/10.1515/amm-2016-0109.Suche in Google Scholar

[5] M. Akiba, B. Shen, and A. Inoue, “Bulk Glassy Fe–Mo–Ga–P–C–B–Si Alloys with High Glass-Forming Ability and Good Soft Magnetic Properties,” Mater. Trans., vol. 46, no. 12, pp. 2773–2776, 2005. https://doi.org/10.2320/matertrans.46.2773.Suche in Google Scholar

[6] S. Lesz, M. Nabia, and R. Nowosielski, “Crack initiation and fracture features of Fe–Co–B–Si–Nb bulk metallic glass during compression,” Mater. Technol., vol. 49, no. 3, pp. 409–412, 2015. https://doi.org/10.17222/mit.2014.108.Suche in Google Scholar

[7] C. T. Chang, B. L. Shen, and A. Inoue, “Co-Fe-B-Si-Nb bulk glassy alloys with superh igh strength and extremely low magnetostriction,” Appl. Phys. Lett., vol. 88, p. 011901, 2006. https://doi.org/10.1063/1.2159107.Suche in Google Scholar

[8] A. Inoue and B. L. Shn, “Formation and soft magnetic properties of Co Fe-Si-B-Nb bulk glassy alloy,” Mater. Trans., vol. 43, pp. 1230–1234, 2002. https://doi.org/10.2320/matertrans.43.1230.Suche in Google Scholar

[9] K. Suzuki, X. Fujimori, and K. Hashimoto, Amorphous metals, T. Masumoto, Ed., Moskow, M. Metallurgy, 1987, pp. 150–156.Suche in Google Scholar

[10] L. Nascimento and A. Melnyk, “Characterization of amorphous alloy Co87Nb46B15,” J. Chil. Chem. Soc., vol. 62, no. 2, pp. 3512–3514, 2017. https://doi.org/10.4067/s0717-97072017000200017.Suche in Google Scholar

[11] H. Ahmadian Baghbaderani, S. Sharafi, and M. D. Chermahini, “Investigation of nanostructure formation mechanism and magnetic properties in Fe45Co45Ni10 system synthesized by mechanical alloying,” Powder Technol., vol. 230, pp. 241–246, 2012. https://doi.org/10.1016/j.powtec.2012.07.039.Suche in Google Scholar

[12] G. Herzer, Scripta Metall. Mater., vol. 33, nos. 10/11, pp. 1741–1756, 1995. https://doi.org/10.1016/0956-716x(95)00397-e.Suche in Google Scholar

[13] P. J. Bardzinskia, M. Kopcewiczb, M. Rybaczuka, et al.., “Magnetic properties and structure of amorphous Fe74Hf4Ta1Cu1Gd1LaxSi15-xB4 (x=0, 7) ribbons,” Acta Phys. Pol., A, vol. 127, no. 3, 2015.Suche in Google Scholar

[14] R. Babilasa, A. Radona, and P. Gebara, “Structure and magnetic properties of Fe–B–Si–Zr metallic glasses,” Acta Phys. Pol., A, vol. 131, p. 4, 2017. https://doi.org/10.12693/aphyspola.131.726.Suche in Google Scholar

[15] N. V. Ershova, V. I. Fedorovb, Y. P. Chernenkovb, V. A. Lukshina, and D. A. Shishkina, “Effect of crystallization annealing under loading on the magnetic properties and the structure of a soft magnetic FeSiNbCuB alloy doped with chromium,” Phys. Solid State, vol. 59, no. 9, pp. 1748–1761, 2017. https://doi.org/10.1134/s1063783417090074.Suche in Google Scholar

[16] J. Farmer, J. Haslam, D. Day, et al.., “A high-performance corrosion-resistant iron-based amorphous metal – the effects of composition, structure and environment on corrosion resistance,” MRS Online Proc. Libr., vol. 985, p. 803, 2006. https://doi.org/10.1557/proc-985-0985-nn08-03.Suche in Google Scholar

Received: 2022-03-04
Revised: 2022-05-20
Accepted: 2022-06-02
Published Online: 2022-06-24
Published in Print: 2022-10-27

© 2022 Walter de Gruyter GmbH, Berlin/Boston

Heruntergeladen am 3.11.2025 von https://www.degruyterbrill.com/document/doi/10.1515/zna-2022-0065/html?lang=de
Button zum nach oben scrollen