Abstract
This paper focuses on the vibration characteristics of the parabolic functionally graded material (FGM) beam considering the axially moving and spinning motion. Based on the Hamilton’s principle, the governing equation of the beam is derived. Then, the Galerkin’s method is employed to solve the equation. The combined influence of axial speed, spinning speed, and geometric parameters on natural frequencies of the beam are investigated. What’s more, the axially moving and spinning motion can lead to a critical axial speed and critical spinning angular speed, respectively. These two critical speeds and stable region affected by different parameters are also discussed.
Funding source: National Natural Science Foundation of China
Award Identifier / Grant number: Grant Nos. 11872319
-
Author contribution: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: This research work was supported by the National Natural Science Foundation of China (Grant Nos. 11872319).
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
[1] A. Gupta and M. Talha, “Recent development in modeling and analysis of functionally graded materials and structures,” Prog. Aero. Sci., vol. 79, pp. 1–14, 2015. https://doi.org/10.1016/j.paerosci.2015.07.001.Suche in Google Scholar
[2] Z. Su, G. Jin, and T. Ye, “Three-dimensional vibration analysis of thick functionally graded conical, cylindrical shell and annular plate structures with arbitrary elastic restraints,” Compos. Struct., vol. 118, pp. 432–447, 2014. https://doi.org/10.1016/j.compstruct.2014.07.049.Suche in Google Scholar
[3] M. H. Ghayesh and M. Amabili, “Nonlinear vibrations and stability of an axially moving Timoshenko beam with an intermediate spring support,” Mech. Mach. Theor., vol. 67, pp. 1–16, 2013. https://doi.org/10.1016/j.mechmachtheory.2013.03.007.Suche in Google Scholar
[4] J. Wang, D. Li, and J. Jiang, “Coupled flexural–torsional vibration of spinning smart beams with asymmetric cross sections,” Finite Elem. Anal. Des., vol. 105, pp. 16–25, 2015. https://doi.org/10.1016/j.finel.2015.06.008.Suche in Google Scholar
[5] F. Pellicano and F. Vestroni, “Nonlinear dynamics and bifurcations of an axially moving beam,” J. Vib. Acoust., vol. 122, pp. 21–30, 1999. https://doi.org/10.1115/1.568433.Suche in Google Scholar
[6] S. H. Chi and Y. L. Chung, “Mechanical behavior of functionally graded material plates under transverse load—Part I: analysis,” Int. J. Solid Struct., vol. 43, pp. 3657–3674, 2006. https://doi.org/10.1016/j.ijsolstr.2005.04.011.Suche in Google Scholar
[7] M. Aydogdu and V. Taskin, “Free vibration analysis of functionally graded beams with simply supported edges,” Mater. Des., vol. 28, pp. 1651–1656, 2007. https://doi.org/10.1016/j.matdes.2006.02.007.Suche in Google Scholar
[8] Z. Zhong and T. Yu, “Analytical solution of a cantilever functionally graded beam,” Compos. Sci. Technol., vol. 67, pp. 481–488, 2007. https://doi.org/10.1016/j.compscitech.2006.08.023.Suche in Google Scholar
[9] L. Li, X. Li, and Y. Hu, “Free vibration analysis of nonlocal strain gradient beams made of functionally graded material,” Int. J. Eng. Sci., vol. 102, pp. 77–92, 2016. https://doi.org/10.1016/j.ijengsci.2016.02.010.Suche in Google Scholar
[10] H. J. Xiang and J. Yang, “Free and forced vibration of a laminated FGM Timoshenko beam of variable thickness under heat conduction,” Compos. B Eng., vol. 39, pp. 292–303, 2008. https://doi.org/10.1016/j.compositesb.2007.01.005.Suche in Google Scholar
[11] N. Wattanasakulpong and V. Ungbhakorn, “Linear and nonlinear vibration analysis of elastically restrained ends FGM beams with porosities,” Aero. Sci. Technol., vol. 32, pp. 111–120, 2014. https://doi.org/10.1016/j.ast.2013.12.002.Suche in Google Scholar
[12] Y. Sun, S. R. Li, and R. C. Batra, “Thermal buckling and post-buckling of FGM Timoshenko beams on nonlinear elastic foundation,” J. Therm. Stresses, vol. 39, pp. 11–26, 2016. https://doi.org/10.1080/01495739.2015.1120627.Suche in Google Scholar
[13] L. S. Ma and D. W. Lee, “Exact solutions for nonlinear static responses of a shear deformable FGM beam under an in-plane thermal loading,” Eur. J. Mech. Solid., vol. 31, pp. 13–20, 2012. https://doi.org/10.1016/j.euromechsol.2011.06.016.Suche in Google Scholar
[14] C. L. Liao and Y. H. Dang, “Structural characteristics of spinning pretwisted orthotropic beams,” Comput. Struct., vol. 45, pp. 715–731, 1992. https://doi.org/10.1016/0045-7949(92)90490-q.Suche in Google Scholar
[15] G. J. Sheu and S. M. Yang, “Dynamic analysis of a spinning Rayleigh beam,” Int. J. Mech. Sci., vol. 47, pp. 157–169, 2005. https://doi.org/10.1016/j.ijmecsci.2005.01.007.Suche in Google Scholar
[16] J. R. Banerjee and H. Su, “Dynamic stiffness formulation and free vibration analysis of a spinning composite beam,” Comput. Struct., vol. 84, pp. 1208–1214, 2006. https://doi.org/10.1016/j.compstruc.2006.01.023.Suche in Google Scholar
[17] S. Na, H. Yoon, and L. Librescu, “Effect of taper ratio on vibration and stability of a composite thin-walled spinning shaft,” Thin-Walled Struct., vol. 44, pp. 362–371, 2006. https://doi.org/10.1016/j.tws.2006.02.007.Suche in Google Scholar
[18] X. Li, Y. H. Li, and Y. Qin, “Free vibration characteristics of a spinning composite thin-walled beam under hygrothermal environment,” Int. J. Mech. Sci., vol. 119, pp. 253–265, 2016. https://doi.org/10.1016/j.ijmecsci.2016.10.028.Suche in Google Scholar
[19] X. Li, Y. Qin, Y. H. Li, and X. Zhao, “The coupled vibration characteristics of a spinning and axially moving composite thin-walled beam,” Mech. Adv. Mater. Struct., vol. 25, pp. 722–731, 2017. https://doi.org/10.1080/15376494.2017.1308598.Suche in Google Scholar
[20] K. Zhu and J. Chung, “Nonlinear lateral vibrations of a deploying Euler–Bernoulli beam with a spinning motion,” Int. J. Mech. Sci., vol. 90, pp. 200–212, 2015. https://doi.org/10.1016/j.ijmecsci.2014.11.009.Suche in Google Scholar
[21] P. F. Pai, X. Qian, and X. Du, “Modeling and dynamic characteristics of spinning Rayleigh beams,” Int. J. Mech. Sci., vol. 68, pp. 291–303, 2013. https://doi.org/10.1016/j.ijmecsci.2013.01.029.Suche in Google Scholar
[22] C. An and J. Su, “Dynamic response of clamped axially moving beams: integral transform solution,” Appl. Math. Comput., vol. 218, pp. 249–259, 2011. https://doi.org/10.1016/j.amc.2011.05.035.Suche in Google Scholar
[23] J. Cho, H. Oh, and U. Lee. “Dynamics of an axially moving viscoelastic beam subject to axial tension,” in 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 2004.10.2514/6.2004-2022Suche in Google Scholar
[24] S. M. Bagdatli and B. Uslu, “Free vibration analysis of axially moving beam under non-ideal conditions,” Struct. Eng. Mech., vol. 54, pp. 597–605, 2015. https://doi.org/10.12989/sem.2015.54.3.597.Suche in Google Scholar
[25] Y. H. Li, L. Wang, and E. C. Yang, “Nonlinear dynamic responses of an axially moving laminated beam subjected to both blast and thermal loads,” Int. J. Non Lin. Mech., vol. 101, pp. 56–67, 2018. https://doi.org/10.1016/j.ijnonlinmec.2018.02.007.Suche in Google Scholar
[26] H. R. Öz and M. Pakdemirli, “Vibrations of an axially moving beam with time-dependent velocity,” J. Sound Vib., vol. 227, pp. 239–257, 1999. https://doi.org/10.1006/jsvi.1999.2247.Suche in Google Scholar
[27] M. H. Ghayesh and M. Amabili, “Steady-state transverse response of an axially moving beam with time-dependent axial speed,” Int. J. Non Lin. Mech., vol. 49, pp. 40–49, 2013. https://doi.org/10.1016/j.ijnonlinmec.2012.08.003.Suche in Google Scholar
[28] S. Guo, Y. He, D. Liu, J. Lei, L. Shen, and Z. Li, “Torsional vibration of carbon nanotube with axial velocity and velocity gradient effect,” Int. J. Mech. Sci., vol. 119, pp. 88–96, 2016. https://doi.org/10.1016/j.ijmecsci.2016.09.036.Suche in Google Scholar
[29] Y. H. Dong, Y. H. Li, D. Chen, and J. Yang, “Vibration characteristics of functionally graded graphene reinforced porous nanocomposite cylindrical shells with spinning motion,” Compos. B Eng., vol. 145, pp. 1–13, 2018. https://doi.org/10.1016/j.compositesb.2018.03.009.Suche in Google Scholar
[30] Y. H. Dong, B. Zhu, Y. Wang, Y. H. Li, and J. Yang, “Analytical prediction of the impact response of graphene reinforced spinning cylindrical shells under axial and thermal loads,” Appl. Math. Model., vol. 71, pp. 331–348, 2019. https://doi.org/10.1016/j.apm.2019.02.024.Suche in Google Scholar
[31] Y. Dong, X. Li, K. Gao, Y. Li, and J. Yang, “Harmonic resonances of graphene-reinforced nonlinear cylindrical shells: effects of spinning motion and thermal environment,” Nonlinear Dynam., vol. 99, no. 2, pp. 981–1000, 2020. https://doi.org/10.1007/s11071-019-05297-8.Suche in Google Scholar
[32] J. Shaw and S. W. Shaw, “Instabilities and bifurcations in a rotating shaft,” J. Sound Vib., vol. 132, pp. 227–244, 1989. https://doi.org/10.1016/0022-460x(89)90594-4.Suche in Google Scholar
© 2021 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Atomic, Molecular & Chemical Physics
- Chirp waveform control to produce broad harmonic plateau and single attosecond pulse
- Dynamical Systems & Nonlinear Phenomena
- Ion-acoustic stable oscillations, solitary, periodic and shock waves in a quantum magnetized electron–positron–ion plasma
- Nonlinear forced vibration of rotating composite laminated cylindrical shells under hygrothermal environment
- Vibration characteristics and stable region of a parabolic FGM thin-walled beam with axial and spinning motion
- Hydrodynamics
- Curvilinear flow of micropolar fluid with Cattaneo–Christov heat flux model due to oscillation of curved stretchable sheet
- Quantum Theory
- Accuracy of the typicality approach using Chebyshev polynomials
- Solid State Physics & Materials Science
- Impact of Sn ions on structural and electrical description of TiO2 nanoparticles
- The effect of non-bridging oxygen on the electrical transport of some lead borate glasses containing cobalt
- Thermodynamics & Statistical Physics
- Analytical solution for unsteady adiabatic and isothermal flows behind the shock wave in a rotational axisymmetric mixture of perfect gas and small solid particles
Artikel in diesem Heft
- Frontmatter
- Atomic, Molecular & Chemical Physics
- Chirp waveform control to produce broad harmonic plateau and single attosecond pulse
- Dynamical Systems & Nonlinear Phenomena
- Ion-acoustic stable oscillations, solitary, periodic and shock waves in a quantum magnetized electron–positron–ion plasma
- Nonlinear forced vibration of rotating composite laminated cylindrical shells under hygrothermal environment
- Vibration characteristics and stable region of a parabolic FGM thin-walled beam with axial and spinning motion
- Hydrodynamics
- Curvilinear flow of micropolar fluid with Cattaneo–Christov heat flux model due to oscillation of curved stretchable sheet
- Quantum Theory
- Accuracy of the typicality approach using Chebyshev polynomials
- Solid State Physics & Materials Science
- Impact of Sn ions on structural and electrical description of TiO2 nanoparticles
- The effect of non-bridging oxygen on the electrical transport of some lead borate glasses containing cobalt
- Thermodynamics & Statistical Physics
- Analytical solution for unsteady adiabatic and isothermal flows behind the shock wave in a rotational axisymmetric mixture of perfect gas and small solid particles