Pre-Deformation Method for Manufactured Compressor Blade Based on Load Incremental Approach
-
Kang Da
,
Wang Yongliang
Abstract
The blade deformation caused by aerodynamic and centrifugal loads during operating makes blade configurations different from their stationary shape. Based on the load incremental approach, a novel pre-deformation method for cold blade shape is provided in order to compensate blade deformation under running. Effect of nonlinear blade stiffness is considered by updating stiffness matrix in response to the variation of blade configuration when calculating deformations. The pre-deformation procedure is iterated till a converged cold blade shape is obtained. The proposed pre-deformation method is applied to a transonic compressor rotor. Effect of load conditions on blade pre-deformation is also analyzed. The results show that the pre-deformation method is easy to implement with fast convergence speed. Neither the aerodynamic load nor centrifugal load can be neglected in blade pre-deformation.
Funding statement: This investigation was supported by National Natural Science Foundation of China (Grant No. 51606023 and 51436002), Natural Science Foundation of Liaoning Province, (Grant No. 2015020130), and Fundamental Research Funds for the Central Universities, (Grant No. 3132017015).
Nomenclature
- F
Load force
- U
Structural displacement
Load increment
Displacement increment
Stiffness matrix
- m
The number of load segments
- X
Node coordinates
Criteria for residual
- AL
Aerodynamic load
- CL
Centrifugal load
- CFD
Computational fluid dynamics
- CSD
Computational structural dynamics
- Subscript
- i
Iteration
- Superscript
- Hot
Hot blade
- Cold
Cold blade
References
1. Gaolian L. The generalized untwist problem of rotating blades: a coupled aeroelastic formulation. ASME Paper No. 94-GT-273, 1994.Suche in Google Scholar
2. Kallesøe BS, Hansen MH. Some effects of large blade deflections on aeroelastic stability. AIAA Paper No. AIAA-2009-839, 2009.10.2514/6.2009-839Suche in Google Scholar
3. Zheng Y, Tian X, Yang H. Impact of blade deflection on aerodynamic performance of a transonic fan. J Aerosp Power 2011;26(7):1621–1627. (Chinese)Suche in Google Scholar
4. Hazby H, Woods I, Casey M, Numakura R, Tamaki H. Effects of blade deformation on the performance of a high flow coefficient mixed flow impeller. ASME J Turbomach 2015;137(12):121005–121005-9.10.1115/GT2015-42079Suche in Google Scholar
5. Songbai W, Shaobin L, Xizhen S. Investigations on static aeroelastic problems of transonic fans based on fluid-structure interaction method. Proc Inst Mech Eng Part A J Power Energ 2016;230(7):685–695.10.1177/0957650916668456Suche in Google Scholar
6. Chen M. Development of fan/compressor techniques and suggestions on further researches. J Aerosp Power 2002;17(1):1–15. (Chinese)Suche in Google Scholar
7. Roberto B, Ernesto B. Recent advances in transonic axial compressor aerodynamics. Prog Aerosp Sci 2013;56(1):1–18.10.1016/j.paerosci.2012.05.002Suche in Google Scholar
8. Ohtsuka M. Untwist of rotating blades. ASME Paper No. 74-GT-2, 1974.10.1115/1.3445954Suche in Google Scholar
9. Gaolian L. A new generation of inverse shape design problem in aerodynamics and aerothermoelasticity: concepts, theory and methods. Aircraft Eng Aerosp Technol 2000;72(4):334–344.10.1108/00022660010340141Suche in Google Scholar
10. Mahajan AJ, Stefko GL. An iterative multidisciplinary analysis for rotor blade shape determination. AIAA Paper No. AIAA-93-2085, 1993.10.2514/6.1993-2085Suche in Google Scholar
11. Niu D, Chen W. Dimension conversion from hot state to cold state of the turbine components. J Aerosp Power 2006;21(1):190–194. (Chinese)Suche in Google Scholar
12. Sun S, Tang B, Zhang M. Back calculation for cold-state geometric shape of turbine blade based on modification of nodal coordinates and mesh smoothing. J Mech Eng 2014;50(10):143–148. (Chinese)10.3901/JME.2014.10.143Suche in Google Scholar
13. Zheng Y, Wang B, Yang H. Numerical study on blade un-running design of a transonic fan. J Mech Eng 2013;49(5):147–153. (Chinese)10.3901/JME.2013.05.147Suche in Google Scholar
14. Zheng Y, Wang B, Yang H, Shen Z. Blade untwist influencing factors of a transonic fan. Gas Turbine Exp Res 2013;26(5):7–11. (Chinese)Suche in Google Scholar
15. Puterbaugh SL, Brendel M. Tip clearance flow-shock interaction in a transonic compressor rotor. J Propul Power 1997;13(1):24–30.10.2514/6.1995-2459Suche in Google Scholar
16. Juan D, Feng L, Jingyi C, Chaoqun N, Christoph B. Flow structures in the tip region for a transonic compressor rotor. ASME J Turbomach 2013;135(3):031012–031012-11.10.1115/1.4006779Suche in Google Scholar
17. Sakulkaew S, Tan CS, Donahoo E, Cornelius C, Montgomery M. Compressor efficiency variation with rotor tip gap from vanishing to large clearance. ASME J Turbomach 2013;135(3):031030–031030-10.10.1115/GT2012-68367Suche in Google Scholar
18. Masato F, Kazuhisa S, Kazutoyo Y, Masahiro I. Unsteady flow behavior due to breakdown of tip leakage vortex in an axial compressor rotor at near-stall condition. ASME Paper No. 2000-GT-666, 2000.Suche in Google Scholar
© 2020 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Original Research Articles
- Investigation on Rotor-Labyrinth Seal System with Variable Rotating Speed
- Numerical Study on the Secondary Air Performance of the Film Holes for the Combined Impingement and Film Cooled First Stage of High Pressure Gas Turbine Nozzle Guide Vane
- Application and Design of Multi-Impingement Cooling Channel in Turbine Blade Trail Edge
- Pre-Deformation Method for Manufactured Compressor Blade Based on Load Incremental Approach
- Control of Supersonic Elliptic Jet with Ventilated Tabs
- Ceramic Matrix Composite Turbine Vane Thermal Simulation Test and Evaluation
- Investigation on Performance of Compressor Cascade with Tubercle Leading Edge Blade
- Numerical Study on Thermal Choke Behaviors Driven by Various Rocket Operations in an RBCC Engine in Ramjet Mode
Artikel in diesem Heft
- Frontmatter
- Original Research Articles
- Investigation on Rotor-Labyrinth Seal System with Variable Rotating Speed
- Numerical Study on the Secondary Air Performance of the Film Holes for the Combined Impingement and Film Cooled First Stage of High Pressure Gas Turbine Nozzle Guide Vane
- Application and Design of Multi-Impingement Cooling Channel in Turbine Blade Trail Edge
- Pre-Deformation Method for Manufactured Compressor Blade Based on Load Incremental Approach
- Control of Supersonic Elliptic Jet with Ventilated Tabs
- Ceramic Matrix Composite Turbine Vane Thermal Simulation Test and Evaluation
- Investigation on Performance of Compressor Cascade with Tubercle Leading Edge Blade
- Numerical Study on Thermal Choke Behaviors Driven by Various Rocket Operations in an RBCC Engine in Ramjet Mode
