An Impingement Cooling Using Swirling Jets Induced by Helical Rod Swirl Generators

References

[1] Jaisankar S, Radhakrishnan TK, Sheeba KN. Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of twisted tapes. Appl Therm Eng 2009;29:1224–31.10.1016/j.applthermaleng.2008.06.009Search in Google Scholar

[2] Eiamsa-ard S, Nivesrangsan P, Chokphoemphun S, Promvonge P. Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics. Int Commun Heat Mass Transfer 2010;37:850–6.10.1016/j.icheatmasstransfer.2010.05.012Search in Google Scholar

[3] Manglik RM, Bergles AE. Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes: Part I-Laminar flows. Trans ASME J Heat Transfer 1993;115:881–9.10.1115/1.2911383Search in Google Scholar

[4] Eiamsa-ard S. Study on thermal and fluid flow characteristics in turbulent channel flows with multiple twisted tape vortex generators. Int Commun Heat Mass Transfer 2010;37:644–51.10.1016/j.icheatmasstransfer.2010.02.004Search in Google Scholar

[5] Sarkar A, Singh RP. Air impingement technology for food processing: visualization studies. LWT – Food Sci Technol 2004;37:873–9.10.1016/j.lwt.2004.04.005Search in Google Scholar

[6] Zhang X, Liu Z, Liu W. Numerical studied on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapes. Int J Therm Sci 2012;58:157–67.10.1016/j.ijthermalsci.2012.02.025Search in Google Scholar

[7] Eiamsa-ard S, Rattanawong S, Promvonge P. Turbulent convection in round tube equipped with propeller type swirl generators. Int Commun Heat Mass Transfer 2009;36:357–64.10.1016/j.icheatmasstransfer.2009.01.007Search in Google Scholar

[8] Hong Y, Deng X, Zhang T. 3D Numerical study on compound heat transfer enhancement of converging-diverging tubes equipped with twin twisted tapes. Chin. J Chem Eng 2012;20:589–601.Search in Google Scholar

[9] Kongkaitpaiboon V, Nanan K, Eiamsa-ard S. Experimental investigation of convective heat transfer and pressure loss in a round tube fitted with circular-ring turbulators. Int Commun Heat Mass Transfer 2010;37:568–74.10.1016/j.icheatmasstransfer.2009.12.016Search in Google Scholar

[10] Sarkar A, Nitin N, Karwe MV, Singh RP. Fluid flow and heat transfer in air jet impingement in food processing. J Food Sci 2004;69:CRH113–CRH122.10.1111/j.1365-2621.2004.tb06315.xSearch in Google Scholar

[11] Huang L, El-Genk MS. Heat transfer and flow visualization experiments of swirling, multi-channel, and conventional impinging jets. Int J Heat Mass Transfer 1998;47:583–600.10.1016/S0017-9310(97)00123-3Search in Google Scholar

[12] Wen MY, Jang KJ. An impingement cooling on a flat surface by using circular jet with longitudinal swirling strips. Int J Heat Mass Transfer 2003;46:4657–67.10.1016/S0017-9310(03)00302-8Search in Google Scholar

[13] Alekseenko SV, Bilsky AV, Dulin VM, Markovich DM. Experimental study of an impinging jet with different swirl rates. Int J Heat Fluid Flow 2007;28:1340–59.10.1016/j.ijheatfluidflow.2007.05.011Search in Google Scholar

[14] Lee DH, Won SY, Kim YT, Chung YS. Turbulent heat transfer from a flat to a swirling round impinging jet. Int J Heat Mass Transfer 2002;45:223–7.10.1016/S0017-9310(01)00135-1Search in Google Scholar

[15] Bakirci K, Bilen K. Visualization of heat transfer for impinging swirl flow. Exp Therm Fluid Sci 2007;32:182–91.10.1016/j.expthermflusci.2007.03.004Search in Google Scholar

[16] Nuntadusit C, Wae-hayee M, Bunyajitradulya A, Eiamsa-ard S. Visualization of flow and heat transfer characteristics for swirling impinging jet. Int Commun Heat Mass Transfer 2012;39:640–8.10.1016/j.icheatmasstransfer.2012.03.002Search in Google Scholar

[17] Nuntadusit C, Wae-hayee M, Bunyajitradulya A, Eiamsa-ard S. Heat transfer enhancement by multiple swirling impinging jets with twisted-tape swirl generators. Int Commun Heat Mass Transfer 2012;39:102–7.10.1016/j.icheatmasstransfer.2011.10.003Search in Google Scholar

[18] Yang HQ, Kim T, Lu TJ, Ichimiya K. Flow structure, wall pressure and heat transfer characteristics of impinging annular jet with/without steady swirling. Int J Heat Mass Transfer 2010;53:4092–100.10.1016/j.ijheatmasstransfer.2010.05.029Search in Google Scholar

[19] Nanan K, Wongcharee K, Nuntadusit C, Eiamsa-ard S. Forced convective heat transfer by swirling impinging jets issuing from nozzles equipped with twisted tapes. Int Commun Heat Mass Transfer 2012;39:844–52.10.1016/j.icheatmasstransfer.2012.05.002Search in Google Scholar

[20] Ianiro A, Cardone G. Heat transfer rate and uniformity in multichannel swirling impinging jets. Appl Therm Eng 2012;49:89–98.10.1016/j.applthermaleng.2011.10.018Search in Google Scholar

[21] Geers LFG, Tummers MJ, Bueninck TJ, Hanjalic K. Heat transfer correlation for hexagonal and in-line arrays of impinging jets. Int J Heat Mass Transfer 2008;51:5389–99.10.1016/j.ijheatmasstransfer.2008.01.035Search in Google Scholar

[22] Kline SJ, McClintock FA. Describing uncertainties in single-example experiments. Mech Eng 1953;75:3–8.Search in Google Scholar

[23] Zhou DW, Lee SJ. Forced convection heat transfer with impinging rectangular jets. Int J Heat Mass Transfer 2007;50:1916–26.10.1016/j.ijheatmasstransfer.2006.09.022Search in Google Scholar

[24] Hofmann HM, Kind M, Martin H. Measurements on steady state heat transfer and flow structure and new correlations for heat and mass transfer in submerged impinging jets. Int J Heat Mass Transfer 2007;50:3957–65.10.1016/j.ijheatmasstransfer.2007.01.023Search in Google Scholar

[25] Ashforth-Frost S, Jambunathan K, Whitney CF. Velocity and turbulence characteristics of a semiconfined orthogonally impinging slot jet. Exp Therm Fluid Sci 1997;14:60–7.10.1016/S0894-1777(96)00112-4Search in Google Scholar