Coupling Network Computing Applications in Air-cooled Turbine Blades Optimization

References

[1] Chi Z, Kan R, Ren J, Jiang H. Experimental and numerical study of the anti-cross flows impingement cooling structure. Int J Heat Mass Transfer 2013;64:567–80.10.1016/j.ijheatmasstransfer.2013.04.052Suche in Google Scholar

[2] Jiang F, Wei-wei Z, Rongqiao W, Xiuli S, Zhiying C. Optimization design of the blade shroud based on ISIGHT software. J Aerosp Power 2011;26(4):745–51.Suche in Google Scholar

[3] Xujun H. Parametric expression of cooling structure of turbine blade and the optimization design of channels with ribs. Harbin Institute of Technology, 2011.Suche in Google Scholar

[4] Zhi T, Shengping H, Shujun H, Shuiting D, Guoqiang Xu, Hongwei Wu. Study on application of fluid network into the design of air system in engine. J Aerospace Power 2009;24(1):1–6.Suche in Google Scholar

[5] Li Z, Songling L, Huiren Z. Computation for the flow and heat transfer properties of a pin fin duct. J Propul Technol 2010;31(5):593–8.Suche in Google Scholar

[6] Wen G, Honghu Ji, Yi C, Hefu J, Yufang L. Optimized design approach for internal cooling structure in turbine blades. J Nanjing Univ Aeronaut Astronaut 2006;38(4):408–12.Suche in Google Scholar

[7] Martin TJ. Computer-automated multi-disciplinary analysis and design optimization of internally cooled turbine blades. The Pennsylvania State University Aerospace Engineering Department, 2001, 05.Suche in Google Scholar

[8] Dennis BH, Egorov IN, Sobieczky H, Dulikravich GS, Yoshimura S. Parallel thermo elasticity optimization of 3-D serpentine cooling passages in turbine blades. Int J Turbo Jet Engines 2004;21:57–68.10.1515/TJJ.2004.21.1.57Suche in Google Scholar

[9] Dennis BH, Egorov IN, Dulikravich GS, Yoshimura S. Optimization of a large number of coolant passages located close to the surface of a turbine blade. GT2003–38051.10.1115/GT2003-38051Suche in Google Scholar

[10] Verstraete T, Amaral S, Braembussche RV, Arts T. Design and optimization of the internal cooling channels of a high pressure turbine blade—Part II optimization. J Turbomach 2010;132:021014:1–9.10.1115/1.3104615Suche in Google Scholar

[11] Songtao W, Zhongran C, Fengbo W, Guotai F. Cooling structure design for turbine blades I: Parameterized design. J Eng Thermo Phys 2011;04:43–6.Suche in Google Scholar

[12] Han JC, Dutta S, Ekkad S. Gas turbine heat transfer and cooling technology. London: Taylor Francis, 2000.Suche in Google Scholar

[13] Li Z, Songling L, Gaowen L. Numerical simulation on heat transfer and pressure dropin pin-fin trapezoidal and rectangular duct. J Propul Technol 2004;25(2):107–10.Suche in Google Scholar

[14] Chupp RE, Helms HE, Mcfadden PW. Evaluation of internal heat transfer coefficients for jet array impingement cooled turbine airfoils. Aircraft 1969;6(3):203–8.10.2514/3.44036Suche in Google Scholar

[15] Zhenxia L, Lifen Z. Numerical study of heat transfer using heat-flow coupling method for turbine blade with air cooling. J Northwestern Polytech Univ 2007;25(2):315–19.Suche in Google Scholar

[16] Rui K, Wei C, Jing R, Hongde J. Aero-thermo dynamical characteristics in ribbed trapezoidal internal cooling system. J Eng Thermo Phys 2010;31(5):753–6.Suche in Google Scholar

[17] Xuewen W. Investigation of flow and heat transfer in a Pin-Fin trapezoidal duct. Northwestern Polytechnical University, 2006.Suche in Google Scholar

[18] Saxer-Felici H, Naik S, Gritsch M. Heat transfer characteristics of a blade trailing edge with pressure side bleed extraction. GT2013–95003.10.1115/GT2013-95003Suche in Google Scholar

[19] Kuahai Yu, Xi Y, Jun Ni, Zhufeng Y. Cooling passage design optimization of turbine blades based on response surface methodology. Acta Aeronauticaet Astronau Tica Sinica 2009;30(9):1630–4.Suche in Google Scholar

[20] Kuahai Yu, Zhufeng Y. Parametric modeling and multidisciplinary design optimization for cooling turbine blade. J Aerospace Power 2007;22(8):1346–51.Suche in Google Scholar