Article
Licensed
Unlicensed
Requires Authentication
Surface conditioning in machining processes
-
Volker Schulze
Volker Schulze has been a full professor for Manufacturing and Materials Technology at the Institute for Production Science at Karlsruhe Institute of Technology (KIT) since April 2010. Concurrently, he is director at the Institute of Applied Materials at KIT. He is a member of CIRP International Academy for Production Engineering and spokesperson of the Research Priority Program 2086 of DFG. His research interests include machining, additive manufacturing, heat treatment and mechanical surface treatments.
Published/Copyright:
November 25, 2020
Published Online: 2020-11-25
Published in Print: 2020-11-18
© 2020 Walter de Gruyter GmbH, Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Frontmatter
- Editorial
- Surface conditioning in machining processes
- Beiträge
- Concept for soft sensor structure for turning processes of AISI4140
- Temperature monitoring in the subsurface during single lip deep hole drilling
- Development of thin-film based sensors for temperature and tool wear monitoring during machining
- Metrological characterization of the thermomechanical influence of the cross-section of the undeformed chip on the surface properties in turning of the aluminum alloy EN AW-2017
- Potential of magnetic Barkhausen noise analysis for in-process monitoring of surface layer properties of steel components in grinding
Articles in the same Issue
- Frontmatter
- Editorial
- Surface conditioning in machining processes
- Beiträge
- Concept for soft sensor structure for turning processes of AISI4140
- Temperature monitoring in the subsurface during single lip deep hole drilling
- Development of thin-film based sensors for temperature and tool wear monitoring during machining
- Metrological characterization of the thermomechanical influence of the cross-section of the undeformed chip on the surface properties in turning of the aluminum alloy EN AW-2017
- Potential of magnetic Barkhausen noise analysis for in-process monitoring of surface layer properties of steel components in grinding
