Article Open Access

Fabrication of electroless Ni plated Fe-TiC metal matrix composites

  • EMAIL logo and
Published/Copyright: September 7, 2011
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Science and Engineering of Composite Materials
From the journal Science and Engineering of Composite Materials Volume 18 Issue 3

Published Online: 2011-09-07
Published in Print: 2011-09-01

©2011 by Walter de Gruyter Berlin Boston

Articles in the same Issue

  1. Original Articles
  2. Novel fabrication process of AlN ceramic matrix composites at low temperatures
  3. Characterization of Jetring yarn structure and properties
  4. Frequency optimization of laminated skewed open cylindrical shells
  5. Fabrication of electroless Ni plated Fe-TiC metal matrix composites
  6. The composite wood by poplar wood impregnated with Na2SiO3-polyacrylamide hybrid solution
  7. Non-linear buckling analysis of tapered curved composite plates
  8. Fabrication and characterization of unidirectional CF/Al composites
  9. Non-isothermal crystallization behavior of clay-reinforced polypropylene nanocomposites
  10. Bond behavior of carbon-fiber yarn embedded in cement mortar
  11. Optical limiters based on silver nanoparticles embedded in amorphous polystyrene
  12. Physical and mechanical properties of concrete containing hematite as aggregates
https://doi.org/10.1515/secm.2011.024
Keywords for this article
composites; electroless nickel plating; powder metallurgy; sintering
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Original Articles
  2. Novel fabrication process of AlN ceramic matrix composites at low temperatures
  3. Characterization of Jetring yarn structure and properties
  4. Frequency optimization of laminated skewed open cylindrical shells
  5. Fabrication of electroless Ni plated Fe-TiC metal matrix composites
  6. The composite wood by poplar wood impregnated with Na2SiO3-polyacrylamide hybrid solution
  7. Non-linear buckling analysis of tapered curved composite plates
  8. Fabrication and characterization of unidirectional CF/Al composites
  9. Non-isothermal crystallization behavior of clay-reinforced polypropylene nanocomposites
  10. Bond behavior of carbon-fiber yarn embedded in cement mortar
  11. Optical limiters based on silver nanoparticles embedded in amorphous polystyrene
  12. Physical and mechanical properties of concrete containing hematite as aggregates
Downloaded on 10.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/secm.2011.024/html
Scroll to top button