Novel fabrication process of AlN ceramic matrix composites at low temperatures

Hesam Nasery; Martin Pugh; Mamoun Medraj

doi:10.1515/secm.2011.021

Home Novel fabrication process of AlN ceramic matrix composites at low temperatures

Article Open Access

Novel fabrication process of AlN ceramic matrix composites at low temperatures

Hesam Nasery , Martin Pugh and Mamoun Medraj

Published/Copyright: September 7, 2011

Download Article (PDF)

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal Science and Engineering of Composite Materials Volume 18 Issue 3

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Nasery, Hesam, Pugh, Martin and Medraj, Mamoun. "Novel fabrication process of AlN ceramic matrix composites at low temperatures" Science and Engineering of Composite Materials, vol. 18, no. 3, 2011, pp. 117-125. https://doi.org/10.1515/secm.2011.021

Nasery, H., Pugh, M. & Medraj, M. (2011). Novel fabrication process of AlN ceramic matrix composites at low temperatures. Science and Engineering of Composite Materials, 18(3), 117-125. https://doi.org/10.1515/secm.2011.021

Nasery, H., Pugh, M. and Medraj, M. (2011) Novel fabrication process of AlN ceramic matrix composites at low temperatures. Science and Engineering of Composite Materials, Vol. 18 (Issue 3), pp. 117-125. https://doi.org/10.1515/secm.2011.021

Nasery, Hesam, Pugh, Martin and Medraj, Mamoun. "Novel fabrication process of AlN ceramic matrix composites at low temperatures" Science and Engineering of Composite Materials 18, no. 3 (2011): 117-125. https://doi.org/10.1515/secm.2011.021

Nasery H, Pugh M, Medraj M. Novel fabrication process of AlN ceramic matrix composites at low temperatures. Science and Engineering of Composite Materials. 2011;18(3): 117-125. https://doi.org/10.1515/secm.2011.021

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2011-09-07

Published in Print: 2011-09-01

Articles in the same Issue

Original Articles
Novel fabrication process of AlN ceramic matrix composites at low temperatures
Characterization of Jetring yarn structure and properties
Frequency optimization of laminated skewed open cylindrical shells
Fabrication of electroless Ni plated Fe-TiC metal matrix composites
The composite wood by poplar wood impregnated with Na₂SiO₃-polyacrylamide hybrid solution
Non-linear buckling analysis of tapered curved composite plates
Fabrication and characterization of unidirectional CF/Al composites
Non-isothermal crystallization behavior of clay-reinforced polypropylene nanocomposites
Bond behavior of carbon-fiber yarn embedded in cement mortar
Optical limiters based on silver nanoparticles embedded in amorphous polystyrene
Physical and mechanical properties of concrete containing hematite as aggregates

Search journal Search the content of this journal

https://doi.org/10.1515/secm.2011.021

Keywords for this article

aluminum nitride; metal composite; physical properties; spontaneous infiltration

Creative Commons

BY-NC-ND 3.0

Articles in the same Issue

Original Articles
Novel fabrication process of AlN ceramic matrix composites at low temperatures
Characterization of Jetring yarn structure and properties
Frequency optimization of laminated skewed open cylindrical shells
Fabrication of electroless Ni plated Fe-TiC metal matrix composites
The composite wood by poplar wood impregnated with Na₂SiO₃-polyacrylamide hybrid solution
Non-linear buckling analysis of tapered curved composite plates
Fabrication and characterization of unidirectional CF/Al composites
Non-isothermal crystallization behavior of clay-reinforced polypropylene nanocomposites
Bond behavior of carbon-fiber yarn embedded in cement mortar
Optical limiters based on silver nanoparticles embedded in amorphous polystyrene
Physical and mechanical properties of concrete containing hematite as aggregates