Article
Publicly Available
Masthead
Published/Copyright:
March 1, 2014
Published Online: 2014-03-01
Published in Print: 2014-03-01
©2014 by Walter de Gruyter Berlin/Boston
Articles in the same Issue
- Masthead
- Masthead
- Original articles
- Synthesis and properties of new clay-reinforced aromatic polyimide/nanocomposite-based 3,3′,4,4′-benzophenonetetracarboxylic dianhydride and 1,3-bis(4-aminophenoxy)propane
- Microstructures and surface performance of laser melting deposited composites on a Ti alloy
- Synthesis of porous carbon nanotubes/activated carbon composite spheres and their application for vitamin B12 adsorption
- Energy absorption capacity of pseudoelastic fiber-reinforced composites
- Influence of fly ash particles on tensile and impact behaviour of aluminium (Al/3Cu/8.5Si) metal matrix composites
- Effect of paraffin application technique on the physical and mechanical properties of particleboard
- Thermal conductivity of flat-pressed wood plastic composites at different temperatures and filler content
- Morphology and properties of a photopolymer/clay nanocomposite prepared by a rapid prototyping system
- Tensile behavior of hybrid epoxy composite laminate containing carbon and basalt fibers
- Prediction of longitudinal modulus of aligned discontinuous fiber-reinforced composites using boundary element method
- Determination of the critical load and energy release rate in mode II delamination using a meshfree method
- Shear strength predicting of FRP-strengthened RC beams by using artificial neural networks
- Free vibration analysis of angle-ply laminate composite beams by mixed finite element formulation using the Gâteaux differential
- Nonlinear dynamic behavior of a long temperature-dependent FGM hollow cylinder subjected to thermal shocking
- Effect of stacking sequence and geometric scaling on the brittleness number of glass fiber composite laminate with stress raiser
- Fabrication of hemp fiber-reinforced green composites with organoclay-filled poly(butylene succinate) matrix by pultrusion process
- Correlation of the heater’s duty cycle and specific energy consumption, and reduction in energy consumption in the pultrusion process
Articles in the same Issue
- Masthead
- Masthead
- Original articles
- Synthesis and properties of new clay-reinforced aromatic polyimide/nanocomposite-based 3,3′,4,4′-benzophenonetetracarboxylic dianhydride and 1,3-bis(4-aminophenoxy)propane
- Microstructures and surface performance of laser melting deposited composites on a Ti alloy
- Synthesis of porous carbon nanotubes/activated carbon composite spheres and their application for vitamin B12 adsorption
- Energy absorption capacity of pseudoelastic fiber-reinforced composites
- Influence of fly ash particles on tensile and impact behaviour of aluminium (Al/3Cu/8.5Si) metal matrix composites
- Effect of paraffin application technique on the physical and mechanical properties of particleboard
- Thermal conductivity of flat-pressed wood plastic composites at different temperatures and filler content
- Morphology and properties of a photopolymer/clay nanocomposite prepared by a rapid prototyping system
- Tensile behavior of hybrid epoxy composite laminate containing carbon and basalt fibers
- Prediction of longitudinal modulus of aligned discontinuous fiber-reinforced composites using boundary element method
- Determination of the critical load and energy release rate in mode II delamination using a meshfree method
- Shear strength predicting of FRP-strengthened RC beams by using artificial neural networks
- Free vibration analysis of angle-ply laminate composite beams by mixed finite element formulation using the Gâteaux differential
- Nonlinear dynamic behavior of a long temperature-dependent FGM hollow cylinder subjected to thermal shocking
- Effect of stacking sequence and geometric scaling on the brittleness number of glass fiber composite laminate with stress raiser
- Fabrication of hemp fiber-reinforced green composites with organoclay-filled poly(butylene succinate) matrix by pultrusion process
- Correlation of the heater’s duty cycle and specific energy consumption, and reduction in energy consumption in the pultrusion process
