Identifizierung der Zementart in hydratisierten Betonen und Mörteln / Identification of the Type of Cement in Hardened Concretes and Mortars
-
F. Splittgerber
Abstract
Subject of this paper is the development of a method for the identification of the type of cement present in a hardened concrete or mortar. The method is based on the dehydration of the cement paste and the identification of the phases present after the dehydration. Considering clinker phases and real cements, the following possibilities for the identification of cements were worked out:
• differentiation between Portland cements and cements containing additions by the identification of the mineral phases which are typical for the type of the addition
• differentiation between ordinary and sulphate resistant Portland cements by the identification of the Ye'elimite phase after a dehydration at a temperature of 1100° C
• determination of the characteristic compressive strength of Portland cements by the evaluation of the Alite-content.
For an identification at least two dehydration temperatures have to be considered. The first temperature range is at about 1100 to 1200°C. It is important for the identification of the aluminates and ferrites. Temperatures from about 1400 to 1450°C are needed for the dehydration of the silicates. Because of the appearence of melting phases at temperatures above 1200°C, the Alite-content will be determined indirectly by the determination of the Belite-content and the content of free lime after a dehydration at 1100°C. At this temperature the free lime is considered to represent the difference in calcium oxide between the Alite and the Belite.
© 2014 by
Artikel in diesem Heft
- Inhalt / Contents
- Impressum
- Editorial
- Bohrwiderstandsmessungen, eine neue und standardisierbare Methode zur Bestimmung der Kohäsion von Naturstein: Entwicklung eines Prototypes und dessen Erprobung / Drilling force measurement system, a new standardisa i methodology to determine the stone cohesion: Prototype design and validation
- Das Konservieren von Baudenkmalen: eine neue Methode, um die Wirksamkeit einer stein festigenden Massnahme nachzuweisen / The conservation of monuments: A new method to evaluate consolidating treatments
- Anwendung einer geo-elektrischen Untersuchungsmethode für Mauerwerk im Rahmen eines Instandsetzungsvorhabens / Geo-Electrical Survey of Masonry for Restoration Projects
- Verstärken von Tragwerken und Baudenkmalen / Strengthening of Structures and Monuments
- Identifizierung der Zementart in hydratisierten Betonen und Mörteln / Identification of the Type of Cement in Hardened Concretes and Mortars
- Mitteilungen und Hinweise / Short Notes
- Firmenmitteilungen / Companies inform
- Neuerscheinungen / New Books
- WTA - News
- Veranstaltungskalender / Calendar of Events
- Stichwörter und Bezugsquellen
Artikel in diesem Heft
- Inhalt / Contents
- Impressum
- Editorial
- Bohrwiderstandsmessungen, eine neue und standardisierbare Methode zur Bestimmung der Kohäsion von Naturstein: Entwicklung eines Prototypes und dessen Erprobung / Drilling force measurement system, a new standardisa i methodology to determine the stone cohesion: Prototype design and validation
- Das Konservieren von Baudenkmalen: eine neue Methode, um die Wirksamkeit einer stein festigenden Massnahme nachzuweisen / The conservation of monuments: A new method to evaluate consolidating treatments
- Anwendung einer geo-elektrischen Untersuchungsmethode für Mauerwerk im Rahmen eines Instandsetzungsvorhabens / Geo-Electrical Survey of Masonry for Restoration Projects
- Verstärken von Tragwerken und Baudenkmalen / Strengthening of Structures and Monuments
- Identifizierung der Zementart in hydratisierten Betonen und Mörteln / Identification of the Type of Cement in Hardened Concretes and Mortars
- Mitteilungen und Hinweise / Short Notes
- Firmenmitteilungen / Companies inform
- Neuerscheinungen / New Books
- WTA - News
- Veranstaltungskalender / Calendar of Events
- Stichwörter und Bezugsquellen
