Abstract
Polymeric epoxy-based nanocomposites have rapidly developed in high energy density and power industry components. The composite insulation undergoes harsh extreme temperature conditions and a high electric field with varying frequencies. This paper dissects the components of complex permittivity in epoxy/ZnO nano and micro composites that were synthesized using different methods, utilizing dielectric spectroscopy as per ASTM D150. The performance of the composites was studied by analyzing the spectra over a frequency range spanning from 1 mHz to 1 kHz. We presume interfacial polarization arises in the composites due to particle clustering. Furthermore, we evaluated the effect of varying filler concentration at 25, 50, 70, and 90 °C. The real permittivity positions the α-steps at 70 and 90 °C. The real and imaginary permittivities remain largely unpretentious by the synthesis method over the entire frequency range.
Funding source: Government of Gujarat’s Students Startup and Innovation Policy (SSIP)
Award Identifier / Grant number: SSIP/SOE/092020/003
Acknowledgments
The authors are grateful to Saurashtra University’s Department of Pharmaceutical Sciences for enabling us to work with the ultrasonic probe sonicator. We extend our thanks the High Voltage Laboratory, IITK, and Mr. Amrendra Kumar, Ph.D. scholar, Department of Electrical Engineering, IITK, for helping us to carry out the Broadband Dielectric Spectroscopy facility.
-
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: The authors are grateful to the Government of Gujarat’s Students Startup and Innovation Policy (SSIP), which granted part funding for this project (SSIP/SOE/092020/003).
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
1. Takahiro, I., Yoshiyuki, I., Masayoshi, N., Tetsuo, Y., Kazutoshi, T. G., Takashi, K. Potential applications in electric power and electronics sector. In Advanced Nanodielectrics: Fundamentals and Applications; Toshikatsu, T., Takahiro, I., Eds. Pan Stanford: Singapore, 2017; pp. 19–86.10.1201/9781315230740-2Suche in Google Scholar
2. Frechette, M., Preda, I., Castellon, J. Polymer composites with a large nanofiller content: a case study involving epoxy. IEEE Trans. Dielectr. Electr. Insulat. 2013, 21, 434–443; https://doi.org/10.1109/tdei.2013.004164.Suche in Google Scholar
3. Chen, Y., Wu, J. Investigation on relationship between breakdown strength enhancement of composites and dielectric characteristics of nanoparticle. IEEE Trans. Dielectr. Electr. Insulat. 2016, 23, 927–934; https://doi.org/10.1109/tdei.2015.005378.Suche in Google Scholar
4. Daily, C. S., Sun, W., Kessler, M. R., Xiaoli, T., Nicola, B. Modeling the interphase of a polymer-based nanodielectric. IEEE Trans. Dielectr. Electr. Insulat. 2014, 21, 488–496; https://doi.org/10.1109/tdei.2013.004181.Suche in Google Scholar
5. Iyer, G., Gorur, R. S., Richert, R., Schmidt, L. E. Dielectric properties of epoxy-based nanocomposites for high voltage insulation. IEEE Trans. Dielectr. Electr. Insulat 2011, 18, 659–666; https://doi.org/10.1109/tdei.2011.5931050.Suche in Google Scholar
6. Heid, T., Frechette, M., David, E. Nanostructured epoxy/POSS composites: enhanced materials for high voltage insulation applications. IEEE Trans. Dielectr. Electr. Insulat. 2015, 22, 1594–1604; https://doi.org/10.1109/tdei.2015.7116355.Suche in Google Scholar
7. Wang, Q., Chen, G. Effect of pre-treatment of nanofillers on the dielectric properties of epoxy nano-composites. IEEE Trans. Dielectr. Electr. Insulat. 2014, 21, 1809–1816; https://doi.org/10.1109/tdei.2014.004278.Suche in Google Scholar
8. Patel, R., Gupta, N. Effect of humidity on the complex permittivity of epoxy-based nanodielectrics with metal-oxide fillers. Int. Trans. Electr. Energy Syst. 2012, 23, 846–852; https://doi.org/10.1002/etep.1663.Suche in Google Scholar
9. Huang, X., Xie, L., Yang, K., Wu, C., Jiang, P., Li, S., Wu, S., Tatsumi, K., Tanaka, T. Role of interface in highly filled epoxy/BaTiO3 nanocomposites. Part I—correlation between nanoparticle surface chemistry and nanocomposite dielectric property. IEEE Trans. Dielectr. Electr. Insulat. 2014, 21, 467–479; https://doi.org/10.1109/tdei.2013.004165.Suche in Google Scholar
10. Muhammad, A., Muhammad, A., Abraiz, K. Fabrication, mechanical, thermal, and electrical characterization of epoxy/silica composites for high-voltage insulation. Sci. Eng. Comp. Mat. 2017, 25, 753–759; https://doi.org/10.1515/secm-2015-0445.Suche in Google Scholar
11. Takahiro, I. Nanofiller dispersion for tailoring of nanocomposite dielectrics. In Tailoring of Nanocomposite Dielectrics: From Fundamentals to Devices and Applications; Toshikatsu, T., Alun, S., Eds. Pan Stanford: Singapore, 2017; pp. 41–85.10.1201/9781315201535-4Suche in Google Scholar
12. Abraiz, K., Muhammad, A., Muhammad, I. Long term accelerated aging investigation of an epoxy/silica nanocomposite for high voltage insulation. J. Polym. Eng. 2017, 38, 263–269; https://doi.org/10.1515/polyeng-2016-0233.Suche in Google Scholar
13. Mihir, V., Ritesh, P. Effect of size and shape of nanofillers on electrostatic and thermal behavior of epoxy-based composites. Polym. Polym. Compos. 2021, 29, S978–S988; https://doi.org/10.1177/09673911211032487.Suche in Google Scholar
14. Mihir, V., Ritesh, P. Influence of filler configurations on properties of epoxy-based nanocomposites. In Proceedings of 21st National Power Systems Conference (NPSC), Gandhinagar, India, December 17–19, 2021, 1–6.10.1109/NPSC49263.2020.9331845Suche in Google Scholar
15. Romana, Z., Nandini, G. Dielectric spectroscopy of epoxy-based barium titanate nanocomposites: effect of temperature and humidity. IET Nanodielectrics 2020, 3, 20–27; https://doi.org/10.1049/iet-nde.2019.0036.Suche in Google Scholar
16. Deng, W., Li, T., Li, H., Dang, A., Liu, X., Zhai, J., Wu, H. Morphology modulated defects engineering from MnO2 supported on carbon foam toward excellent electromagnetic wave absorption. Carbon 2023, 206, 192–200; https://doi.org/10.1016/j.carbon.2023.02.039.Suche in Google Scholar
17. Liang, H., Chen, G., Liu, D., Li, Z., Hui, S., Yun, J., Zhang, L., Wu, H. Exploring the ni 3d orbital unpaired electrons induced polarization loss based on ni single-atoms model absorber. Adv. Funct. Mater. 2023, 33, 1–9; https://doi.org/10.1002/adfm.202212604.Suche in Google Scholar
18. Zhao, Z., Zhang, L., Wu, H. Hydro/organo/ionogels: “controllable” electromagnetic wave absorbers. Adv. Mat. 2022, 26, 1–10; https://doi.org/10.1002/adma.202205376.Suche in Google Scholar PubMed
19. Schultz, J. W. Dielectric spectroscopy in analysis of polymers. In Encyclopedia of Analytical Chemistry; Wiley–Blackwell: New Jersey, 2004.Suche in Google Scholar
20. American Society for Testing and Materials (ASTM) International. Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation Pennsylvania; ASTM D150: United States, 2022.Suche in Google Scholar
21. Kavitha, D., Sindhu, T. K., Nambiar, T. N. P. Impact of permittivity and concentration of filler nanoparticles on dielectric properties of polymer nanocomposites. IET Sci. Meas. Technol. 2017, 11, 179–185; https://doi.org/10.1049/iet-smt.2016.0226.Suche in Google Scholar
22. Santanu, S., Thomas, M. J. Dielectric properties of epoxy nanocomposites. IEEE Trans. Dielectr. Insul. 2008, 15, 12–23; https://doi.org/10.1109/t-dei.2008.4446732.Suche in Google Scholar
23. Siny, P., Sindhu, T. K. Development of epoxy-aluminum nanocomposite dielectric material with low filler concentration for embedded capacitor applications. IEEE Trans. Dielectr. Insul. 2013, 21, 460–466.10.1109/TDEI.2013.004175Suche in Google Scholar
24. Wang, Z., Zhou, W., Dong, L., Sui, X., zuo, J., Cai, H., Liu, X., Chen, Q., Cai, J. Dielectric relaxation dynamics of Al/epoxy micro-composites. J. Alloys Compd. 2016, 689, 342–349; https://doi.org/10.1016/j.jallcom.2016.07.332.Suche in Google Scholar
25. Hardoň, S., Kúdelčík, J., Hornak, J., Michal, O., Totzauer, P., Trnka, P. The influence of ZnO nanoparticles in the epoxy resin on the complex permittivity and dissipation factor. In Proceedings of the 13th International Scientific Conference on Sustainable, Modern and Safe Transport (TRANSCOM 2019), Novy Smokovec, Slovak Republic, May 29–31, 2019, 30–33.10.1016/j.trpro.2019.07.006Suche in Google Scholar
26. Saji, V. S. The impact of nanotechnology on reducing corrosion cost. In Corrosion Protection and Control Using Nanomaterials; Viswanathan, S. S., Ronald, C., Eds. Woodhead Publishing Limited: Sawston, 2012; pp. 3–15.10.1533/9780857095800.1.3Suche in Google Scholar
27. Dąda, A., Błaut, P., Kuniewski, M., Zydroń, P. Analysis of selected dielectric properties of epoxy-alumina nanocomposites cured at stepwise increasing temperatures. Energies 2023, 16, 1–20; https://doi.org/10.3390/en16052091.Suche in Google Scholar
28. Lian, Z., Chen, D., Li, S. Investigation on the corelation between dispersion characteristics at terahertz range and dielectric permittivity at low frequency of epoxy resin nanocomposites. Polymers 2022, 14, 1–20.10.3390/polym14040827Suche in Google Scholar PubMed PubMed Central
29. Soulintzis, A., Kontos, G., Karahaliou, P., Psarras, G. C., Georga, S. N., Krontiras, C. A. Dielectric relaxation processes in epoxy resin—ZnO composites. J. Polym. Sci. B Polym. Phys. 2009, 47, 445–454; https://doi.org/10.1002/polb.21649.Suche in Google Scholar
30. Drakopoulos, S. X., Patsidis, A. C., Psarras, G. C. Epoxy-based/BaTiO3 nanodielectrics: relaxation dynamics, charge transport and energy storage. Mater. Res. Bull. 2022, 145, 1–20; https://doi.org/10.1016/j.materresbull.2021.111537.Suche in Google Scholar
31. Kaufman, J. L., Tan, S. H., Lau, K., Shah, A., Gambee, R. G., Gage, C., MacIntosh, L., Dato, A., Saeta, P. N., Haskell, R. C., Monson, T. C. Permittivity effects of particle agglomeration in ferroelectric ceramic-epoxy composites using finite element modeling. AIP Adv. 2018, 8, 1–16; https://doi.org/10.1063/1.5053442.Suche in Google Scholar
32. Varakantham, S. R., Kliem, H. Dielectric relaxational phenomena in interacting composite structures. IEEE Trans. Dielectr. Insul. 2021, 28, 845–852; https://doi.org/10.1109/tdei.2020.009405.Suche in Google Scholar
© 2023 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Material Properties
- The degradation behaviors of optical cellulose triacetate films in alkali/acid solutions
- Exploration of dielectric spectra of variously synthesized epoxy/ZnO nanocomposites
- Preparation and Assembly
- Preparation and evaluation of polyvinyl alcohol hydrogels with zinc oxide nanoparticles as a drug controlled release agent for a hydrophilic drug
- PVA-borax/g-C3N4 nanocomposite hydrogel with excellent mechanical property and self-healing efficiency
- Fabrication and characterization of microencapsulated dimethyl adipate phase change material with melamine-formaldehyde shell for cold thermal energy storage in coating
- Preparation and performance of “three-layer sandwich” composite loose nanofiltration membrane based on mussel bionic technology
- Engineering and Processing
- Electrospinning and electrospun based polyvinyl alcohol nanofibers utilized as filters and sensors in the real world
- Synergistic effect of GMA and TMPTA as co-agent to adjust the branching structure of PLLA during UV-induced reactive extrusion
Artikel in diesem Heft
- Frontmatter
- Material Properties
- The degradation behaviors of optical cellulose triacetate films in alkali/acid solutions
- Exploration of dielectric spectra of variously synthesized epoxy/ZnO nanocomposites
- Preparation and Assembly
- Preparation and evaluation of polyvinyl alcohol hydrogels with zinc oxide nanoparticles as a drug controlled release agent for a hydrophilic drug
- PVA-borax/g-C3N4 nanocomposite hydrogel with excellent mechanical property and self-healing efficiency
- Fabrication and characterization of microencapsulated dimethyl adipate phase change material with melamine-formaldehyde shell for cold thermal energy storage in coating
- Preparation and performance of “three-layer sandwich” composite loose nanofiltration membrane based on mussel bionic technology
- Engineering and Processing
- Electrospinning and electrospun based polyvinyl alcohol nanofibers utilized as filters and sensors in the real world
- Synergistic effect of GMA and TMPTA as co-agent to adjust the branching structure of PLLA during UV-induced reactive extrusion