Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion
-
Hadi Fallah Moafi
and
Seyed Morteza Mostashari
Abstract
In this work, we investigated the effect of aluminum chloride hexahydrate as a flame retardant coating on the flammability of cellulosic and polyester (polyethylene terephthalate, PET) fibers. The samples were characterized by several techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, vertical flammability test, limiting oxygen index (LOI), thermogravimetric analysis (TGA)and differential thermogravimetric (DTG). Aluminum chloride hexahydrate <100 nm in size has been found to form continuous and dispersed particles coatings on the fibers surface which shows efficient flame retardant properties. The optimum loadings to impart flame retardant properties were about 8.73–9.93% for cellulosic fiber and 20.30–23.48% for polyester fiber. Flame retardant activity was tested by a vertical flammability tester and LOI. XRD results of ashes revealed that after combustion of the treated specimens, the existence of α-Al2O3 nanoparticles was detected in the ashes of treated samples. TGA/DTG of pure, treated fibers and the salt was accomplished, and thermograms were compared and discussed. The results obtained are in favor of the free radical theory and also the dust or wall effect theory.
Acknowledgments
The authors are grateful to University of Guilan for financial assistance of this research project.
References
[1] Kemmlein S, Hahn O, Jann O. Atmos. Environ. 2003, 37, 5485–5493.Search in Google Scholar
[2] Ike van der V, Jacob de B. Chemosphere 2012, 88, 1119–1153.10.1016/j.chemosphere.2012.03.067Search in Google Scholar
[3] Lewin M. Polym. Degrad. Stab. 2005, 88, 13–19.Search in Google Scholar
[4] Moafi HF, Shojaie AF, Zanjanchi MA. J. Therm. Anal. Calorim. 2011, 104, 717–724.Search in Google Scholar
[5] Charles QY, Qingliang H. J. Anal. Appl. Pyrol. 2011, 91, 125–133.Search in Google Scholar
[6] Klaus O, Andreas W, Thomas B, Eckhard S. Polym. Degrad. Stab. 2011, 96, 393–395.Search in Google Scholar
[7] Xing W, Jie G, Song L, Hu S, Lv X, Wang X, Hu Y. Thermochim. Acta. 2011, 513, 75–82.Search in Google Scholar
[8] Porter D, Metcalfe E, Thomas MJK. Fire Mater. 2000, 24, 45–52.Search in Google Scholar
[9] Morgan AB. Polym. Adv. Technol. 2006, 17, 206–217.Search in Google Scholar
[10] Okoshi M, Nishizawa H. Fire Mater. 2004, 28, 423–429.Search in Google Scholar
[11] Federico C, Galina L, Jenny A, Giovanni C, Jaime CG. Polym. Degrad. Stab. 2011, 96, 745–750.Search in Google Scholar
[12] Ray SS, Okamoto M. Prog. Polym. Sci. 2003, 281, 539–641.Search in Google Scholar
[13] Brancatelli G, Colleoni C, Massafra MR, Rosace G. Polym. Degrad. Stab. 2011, 96, 483–490.Search in Google Scholar
[14] Kashiqagi T, Shields JR. J. Appl. Polym. Sci. 2003, 89, 2072–2078.Search in Google Scholar
[15] Jenny A, Mihaela C, Giulio M. Carbohydr. Polym. 2011, 85, 599–608.Search in Google Scholar
[16] Mouzheng F, Baojun Q. Polym. Degrad. Stab. 2004, 85, 633–639.Search in Google Scholar
[17] Silvo H, Majda SS, Karin SK, Marjan B, Janez J, Miran G. Polym. Degrad. Stab. 2007, 92, 1957–1965.Search in Google Scholar
[18] Tang Y, Lewin M, Pearce E. Macromol. Rapid Comm. 2006, 27, 1545–1549.Search in Google Scholar
[19] Hao J, Lewin M, Wilkie CA, Wang J. Polym. Degrad. Stab. 2006, 91, 2482–2485.Search in Google Scholar
[20] Tang Y, Lewin M. Polym. Degrad. Stab. 2007, 92, 53–60.Search in Google Scholar
[21] Lewin M, Tang Y. Macromol. 2008, 41, 13–17.Search in Google Scholar
[22] U.S. Department of Commerce Standard for flammability of Children’s Sleepwear (DOC.FF 3-71), Federal Register, 36, No. 146, July 19, 1971.Search in Google Scholar
[23] Mostashari SM, Moafi HF. J. Therm. Anal. Cal. 2008, 93, 589–594.Search in Google Scholar
[24] Mostashari SM, Moafi HF, Mostashari SZ. J. Therm. Anal. Cal. 2009, 96, 535–540.Search in Google Scholar
[25] Mostashari SM, Moafi HF. Int. J. Polym. Mater. 2007, 56, 629–639.Search in Google Scholar
[26] Moafi HF, Shojaie AF, Zanjanchi MA. Chin. J. Chem. 2011, 29, 1239–1245.Search in Google Scholar
[27] Mostashari SM, Moafi HF. Int. J. Polym. Mater. 2007, 56, 127–134.Search in Google Scholar
[28] Mostashari SM, Moafi HF. J. Ind. Text. 2007, 37, 37–41.Search in Google Scholar
[29] Mostashari SM, Moafi HF. Chin. J. Chem. 2009, 27, 1–10.Search in Google Scholar
[30] Mostashari SM, Zanjanchi MA, Moafi HF, Mostashari SZ, Babaei Chaijan MR. Polym-Plast. Technol. Eng. 2008, 47, 307–312.Search in Google Scholar
[31] Mostashari SM, Kamali Nia Y, Moafi HF. Combust. Explos. Shock Waves 2007, 43, 194–197.10.1007/s10573-007-0026-1Search in Google Scholar
[32] Mostashari SM, Mostashari SZ. J. Therm. Anal. Cal. 2009, 95, 187–192.Search in Google Scholar
[33] Mostashari SM, Baie S. J. Therm. Anal. Cal. 2008, 94, 97–101.Search in Google Scholar
[34] Chung C, Lee M, Choe EK. Carbohydr. Polym. 2004, 58, 417–420.Search in Google Scholar
[35] Chen R, Jakes K. Appl. Spectrosc. 2002, 56, 646–650.Search in Google Scholar
[36] Djebara M, Stoquert JP, Abdesselam M, Muller D, Chami AC. Nucl. Instrum. Methods Phys. Res. B 2012, 274, 70–77.10.1016/j.nimb.2011.11.022Search in Google Scholar
[37] Holland BJ, Hay NJ. Polymer 2002, 43, 1835–1847.10.1016/S0032-3861(01)00775-3Search in Google Scholar
[38] Jun SL, Hyun SK, Jun SL, No-Kuk P, Tae JL, Misook K. Ceram. Int. 2012, 38, 6685–6691.Search in Google Scholar
[39] Hongyu L, Guiling N, Zhihong G, Yuan L. Mater. Res. Bull. 2009, 44, 785–788.Search in Google Scholar
[40] Jolles ZE, Jolles GI. Plast. Polym. 1972, 40, 321.Search in Google Scholar
[41] Zhu P, Sui S, Wang B, Sun K, Sun G. J. Anal. Appl. Pyrolysis 2004, 71, 645–655.10.1016/j.jaap.2003.09.005Search in Google Scholar
[42] Sabyasachi G, Patrick R, Viktoriya S, Manfred H, Stefan R, Frederic V. Polym. Degrad. Stab. 2009, 94, 1125–1134.Search in Google Scholar
[43] Martin-Gullon I. J. Anal. Appl. Pyrolysis 2001, 58–59, 635–650.10.1016/S0165-2370(00)00141-8Search in Google Scholar
©2014 by De Gruyter
Articles in the same Issue
- Frontmatter
- Original articles
- Curing kinetics of styrene-(ethylene-butylene)-styrene (SEBS) copolymer by peroxides in the presence of co-agents
- Synthesis and properties of novel high thermally stable polyimide-chrysotile composites as fire retardant materials
- Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion
- Mechanical and morphological properties of high density polyethylene and polylactide blends
- Synthesis and characterization of magnetic Ni0.3 Zn0.7 Fe2 O4/polyvinyl acetate (PVAC) nanocomposite
- Effect of titanium nanofiller on the productivity and crystallinity of ethylene and propylene copolymer
- Mechanical properties of potassium hydroxide-pretreated Christmas palm fiber-reinforced polyester composites: characterization study, modeling and optimization
- Natural frequency response of laminated hybrid composite beams with and without cutouts
- Characterization of C2H2O4 doped PVA solid polymer electrolyte
- Development and characterization of homo, co and terpolyimides based on BPDA, BTDA, 6FDA and ODA with low dielectric constant
- Highly-filled hybrid composites prepared using centrifugal deposition
- Reinforcement of carboxylated acrylonitrile-butadiene rubber (XNBR) with graphene nanoplatelets with varying surface area
- Multiple melting behavior of poly(lactic acid)-hemp-silica composites using modulated-temperature differential scanning calorimetry
Articles in the same Issue
- Frontmatter
- Original articles
- Curing kinetics of styrene-(ethylene-butylene)-styrene (SEBS) copolymer by peroxides in the presence of co-agents
- Synthesis and properties of novel high thermally stable polyimide-chrysotile composites as fire retardant materials
- Flame-resistant polymeric composite fibers based on nanocoating flame retardant: thermogravimetric study and production of α-Al2O3 nanoparticles by flame combustion
- Mechanical and morphological properties of high density polyethylene and polylactide blends
- Synthesis and characterization of magnetic Ni0.3 Zn0.7 Fe2 O4/polyvinyl acetate (PVAC) nanocomposite
- Effect of titanium nanofiller on the productivity and crystallinity of ethylene and propylene copolymer
- Mechanical properties of potassium hydroxide-pretreated Christmas palm fiber-reinforced polyester composites: characterization study, modeling and optimization
- Natural frequency response of laminated hybrid composite beams with and without cutouts
- Characterization of C2H2O4 doped PVA solid polymer electrolyte
- Development and characterization of homo, co and terpolyimides based on BPDA, BTDA, 6FDA and ODA with low dielectric constant
- Highly-filled hybrid composites prepared using centrifugal deposition
- Reinforcement of carboxylated acrylonitrile-butadiene rubber (XNBR) with graphene nanoplatelets with varying surface area
- Multiple melting behavior of poly(lactic acid)-hemp-silica composites using modulated-temperature differential scanning calorimetry
