Polypropylene + boehmite nanocomposite fibers
-
Lubica Škovranová
,
Rouven Streller
Abstract
The influence of nanosized filler particles on mechanical properties of composite fibers has some specific features related to the fiber matrix, its preparation and the filler content, as well as the orientation of the fibers at their drawing. This paper discusses the manner of dispersion of chemically unmodified boehmite type nanofiller, Disperal 40 (D40) or Disperal 60 (D60) in polypropylene (iPP) fibers, and the influence of filler and its particle size on the tenacity, modulus and elongation of the iPP fibers. It was found that filler D40 was effective in increasing the tenacity only up to a content of about 1 wt% and in fibers prepared only at higher drawing ratios. Transmission electron microscopy (TEM) pictures of the cut iPP+D40 or iPP+D60 fibers have shown the presence of aggregation of nanosized boehmite particles in all cases. A comparison of the effects of two different particle sized fillers on the mechanical properties of the isotactic PP (iPP) fibers showed that a small difference between the particle sizes of both kinds of filler plays some role regarding the tensile strength of the fibers. The iPP fibers containing a mixture of D40 and D60 showed some deviations from the expected sum of the effects of both fillers on their mechanical properties.
©2012 by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Masthead
- Masthead
- Review
- Influence of hydrostatic pressure and volumetric strain on the mechanical long term behavior of polymers
- Original Articles
- Dynamic pressure analysis as a tool for determination of sharkskin instability by extrusion of molten polymers
- Young’s modulus and prediction of plastics/elastomer blends
- Comparison of tribological performance of PEEK, UHMWPE, glass fiber reinforced PTFE and PTFE reinforced PEI composite materials under dry and lubricated conditions
- Study on the solidification kinetics of high-density polyethylene during thin-walled injection molding process
- The influence of level of interfacial healing on the weld-line strengths of injection molded parts
- Investigation on Nylon 66 silicate nanocomposites modified under gamma radiation
- Effect of mold surface antistiction treatment on microinjection replication quality using Cr-N/Zr-DLC thin-layer coating
- Estimation of thermal conductivity of PP/Al(OH)3/Mg(OH)2 composites
- Preparation and characterization of polyvinyl alcohol/carbon nanotube (PVA/CNT) conductive nanofibers
- Copolymerization of 5-norbornene-2-metheneoxy-trimethylsilyl with methyl 5-norbornene-2-carboxylate catalyzed by a novel Ni(benzocyclohexan-ketonaphthylimino)2/B(C6F5)3) system
- A modified polyurethane elastomer using polyfunctional HTPB synthesized by in-situ nitroxide mediated polymerization of 1,3-butadiene
- Preparation and characterizations of ternary biodegradable blends composed of polylactide, poly(ε-caprolactone), and wood flour
- Polypropylene + boehmite nanocomposite fibers
- Development of PCL-PEG nanofibrous mats as alternative carriers for recombinant Chinese hamster ovary cells
Artikel in diesem Heft
- Masthead
- Masthead
- Review
- Influence of hydrostatic pressure and volumetric strain on the mechanical long term behavior of polymers
- Original Articles
- Dynamic pressure analysis as a tool for determination of sharkskin instability by extrusion of molten polymers
- Young’s modulus and prediction of plastics/elastomer blends
- Comparison of tribological performance of PEEK, UHMWPE, glass fiber reinforced PTFE and PTFE reinforced PEI composite materials under dry and lubricated conditions
- Study on the solidification kinetics of high-density polyethylene during thin-walled injection molding process
- The influence of level of interfacial healing on the weld-line strengths of injection molded parts
- Investigation on Nylon 66 silicate nanocomposites modified under gamma radiation
- Effect of mold surface antistiction treatment on microinjection replication quality using Cr-N/Zr-DLC thin-layer coating
- Estimation of thermal conductivity of PP/Al(OH)3/Mg(OH)2 composites
- Preparation and characterization of polyvinyl alcohol/carbon nanotube (PVA/CNT) conductive nanofibers
- Copolymerization of 5-norbornene-2-metheneoxy-trimethylsilyl with methyl 5-norbornene-2-carboxylate catalyzed by a novel Ni(benzocyclohexan-ketonaphthylimino)2/B(C6F5)3) system
- A modified polyurethane elastomer using polyfunctional HTPB synthesized by in-situ nitroxide mediated polymerization of 1,3-butadiene
- Preparation and characterizations of ternary biodegradable blends composed of polylactide, poly(ε-caprolactone), and wood flour
- Polypropylene + boehmite nanocomposite fibers
- Development of PCL-PEG nanofibrous mats as alternative carriers for recombinant Chinese hamster ovary cells
