Electrochemical synthesis of porous polyaniline for supercapacitor application
-
Ruvini L. Guniyangodage Dona
,
Nadeesha P.W. Rathuwadu
und
Kaveenga R. Koswattage
Abstract
Polyaniline (PANI) is a promising material for energy storage technologies such as supercapacitors due to its unique properties such as high conductivity, redox activity, excellent environmental stability, low cost, and easy preparation. However, enhancing the charge storage capability of PANI and improving the capacitance of PANI is a challenge. To address this challenge, a novel and facile electrochemical approach to synthesizing the porous PANI is proposed. This approach varies from conventional methods by eliminating the necessity for templates to form pores in the PANI matrix. Pore formation was facilitated using the readily available organic dye, methylene blue (MB). Electrochemical polymerization of PANI was carried out using cyclic voltammetry (CV) within the potential range of 0 V–1.4 V in a 0.1 M H2SO4 electrolyte containing 0.025 M MB. Characteristic redox peaks at approximately 0.5 V, 0.9 V, and 0.2 V confirmed the successful synthesis of PANI. The polymer was electrodeposited onto a stainless-steel (SS) substrate pre-adsorbed with MB and subsequently immersed in ethanol to extract the dye. Porous structures significantly enhance the surface area of the PANI matrix, facilitating rapid ion diffusion and improving charge storage capability. Synthesized material was structurally characterized by the Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), and X-ray diffraction (XRD). FTIR analysis confirmed the deposition of PANI on the electrode substrate. SEM images showed pore structures in the PANI matrix. EDX data showed the presence of elements N and C, confirming the deposition of PANI. The electrochemical characterization of the material was carried out using CV, electrochemical impedance spectroscopy (EIS), and galvanostatic charge-discharge (GCD) technique in 0.5 M H2SO4 electrolyte using a three-electrode configuration to illustrate the electrochemical performance of the material. The CV data showed a significant enhancement in the capacitance of porous PANI to 13 mF cm−2 at the 5 mV/s scan rate compared to the capacitance of PANI of 7.6 mF cm−2. The capacitive and diffusive contributions quantified using Dunn’s method were 24.8 % and 75.2 % respectively. GCD data showed an energy density of 2.056 μ Wh cm−2 at the power density of 0.034 mW cm−2 and a capacitance retention of 98 % after the 10 cycles. EIS data showed the enhancement of electrochemical performances with less charge transfer resistance for porous PANI. These results concluded the efficacy of the proposed electrochemical synthesis method in enhancing the charge storage capability of PANI for its potential for high-performance supercapacitor applications.
Funding source: Science and Technology Human Resource Development Project, Ministry of Education, Sri Lanka, funded by the Asian Development Bank
Award Identifier / Grant number: Grant No CRG-R2-SB-1
Acknowledgment
“This research was supported by the Science and Technology Human Resource Development Project, Ministry of Education, Sri Lanka, funded by the Asian Development Bank (Grant No CRG-R2-SB -1).”
-
Research ethics: Not applicable.
-
Informed consent: Not applicable.
-
Author contributions: All authors have accepted responsibility for the entire content of this manuscript and approved its submission. G.D.R.L. visualization, data curation, analysis, and writing. N.P.W.R. conceptualization, visualization, supervision, investigation, providing resources, reviewing and editing. K.R.K. conceptualization, funding acquisition, investigation and project administration.
-
Use of Large Language Models, AI and Machine Learning Tools: None declared.
-
Conflict of interest: The authors state no conflict of interest.
-
Research funding: This research was supported by the Science and Technology Human Resource Development Project, Ministry of Education, Sri Lanka, funded by the Asian Development Bank (Grant No CRG-R2-SB-1).
-
Data availability: The authors confirm that the data supporting the findings of this study are available within the article and its supplementary materials.
References
1. Olabi, A. G.; Abbas, Q.; Abdelkareem, M. A.; Alami, A. H.; Mirzaeian, M.; Sayed, E. T. Carbon-Based Materials for Supercapacitors: Recent Progress, Challenges and Barriers. Batteries. MDPI January 2023, 1, 19. https://doi.org/10.3390/batteries9010019.Suche in Google Scholar
2. Zhang, M.; Chen, Y.; Yang, D.; Li, J. High Performance MnO2 Supercapacitor Material Prepared by Modified Electrodeposition Method with Different Electrodeposition Voltages. J. Energy Storage 2020, 29, 101363. https://doi.org/10.1016/j.est.2020.101363.Suche in Google Scholar
3. Rodriguez-Romero, J.; Ruiz de Larramendi, I.; Goikolea, E. Nanostructured Manganese Dioxide for Hybrid Supercapacitor Electrodes. Batteries 2022, 8 (12), 263. https://doi.org/10.3390/batteries8120263.Suche in Google Scholar
4. Park, J. H.; Ko, J. M.; Ok Park, O. Carbon Nanotube/RuO[Sub 2] Nanocomposite Electrodes forS.percapacitors. J. Electrochem. Soc. 2003, 150 (7), A864. https://doi.org/10.1149/1.1576222.Suche in Google Scholar
5. Subramanian, V.; Hall, S. C.; Smith, P. H.; Rambabu, B. Mesoporous Anhydrous RuO2 as aS.percapacitor Electrode Material. Solid State Ionics 2004, 175, 511–515. https://doi.org/10.1016/j.ssi.2004.01.070.Suche in Google Scholar
6. Singh, A. K.; Sarkar, D.; Karmakar, K.; Mandal, K.; Khan, G. G. High-Performance Supercapacitor Electrode Based on Cobalt Oxide-Manganese Dioxide-Nickel Oxide Ternary 1D Hybrid Nanotubes. ACS Appl. Mater. Interfaces 2016, 8 (32), 20786–20792. https://doi.org/10.1021/acsami.6b05933.Suche in Google Scholar PubMed
7. Jang, G. S.; Ameen, S.; Akhtar, M. S.; Shin, H. S. Cobalt Oxide Nanocubes as Electrode Material for the Performance Evaluation of Electrochemical Supercapacitor. Ceram. Int. 2018, 44 (1), 588–595. https://doi.org/10.1016/j.ceramint.2017.09.217.Suche in Google Scholar
8. Dhas, S. D.; Maldar, P. S.; Patil, M. D.; Nagare, A. B.; Waikar, M. R.; Sonkawade, R. G.; Moholkar, A. V. Synthesis of NiO Nanoparticles for Supercapacitor Application as an Efficient Electrode Material. Vacuum 2020, 181, 109646. https://doi.org/10.1016/j.vacuum.2020.109646.Suche in Google Scholar
9. Yu, M.; Wang, W.; Li, C.; Zhai, T.; Lu, X.; Tong, Y. Scalable Self-Growth of Ni@NiO Core-Shell Electrode with Ultrahigh Capacitance and Super-Long Cyclic Stability for Supercapacitors. NPG Asia Mater. 2014, 6 (9), e129. https://doi.org/10.1038/am.2014.78.Suche in Google Scholar
10. Li, M.; Ai, T.; Kou, L.; Song, J.; Bao, W.; Wang, Y.; Wei, X.; Li, W.; Deng, Z.; Zou, X.; Wang, H. Synthesis and Electrochemical Performance of V2O5 nanosheets for Supercapacitor. AIP Adv. 2022, 12 (5). https://doi.org/10.1063/5.0086344.Suche in Google Scholar
11. Zhang, T.; Yue, H.; Gao, X.; Yao, F.; Chen, H.; Lu, X.; Wang, Y.; Guo, X. High-Performance Supercapacitors Based on Polyaniline Nanowire Arrays Grown on Three-Dimensional Graphene with Small Pore Sizes. Dalton Trans. 2020, 49 (10), 3304–3311. https://doi.org/10.1039/d0dt00100g.Suche in Google Scholar PubMed
12. Arena, A.; Scandurra, G.; Branca, C.; Ruggeri, M.; Federico, M.; Romano, V.; D’Angelo, G.; Ciofi, C. Polypyrrole Solid-State Supercapacitors Drawn on Paper. Nanomaterials 2023, 13 (23), 3040. https://doi.org/10.3390/nano13233040.Suche in Google Scholar PubMed PubMed Central
13. Ajeel, K. I.; Kareem, Q. S. Synthesis and Characteristics of Polyaniline (PANI) Filled by Graphene (PANI/GR) Nano-Films. J. Phys.: Conf. Series; Inst. Phys. Publ. 2019, 1234, 012020. https://doi.org/10.1088/1742-6596/1234/1/012020.Suche in Google Scholar
14. Xie, A.; Tao, F.; Sun, W.; Li, Y.; Jiang, C.; Hu, L.; Zhao, J.; Luo, S.; Yao, C. Design and Synthesis of Graphene/Porous Polyaniline Nanocomposite Using Attapulgite as Template for High-Performance Supercapacitors. J. Electrochem. Soc. 2017, 164 (2), H70–H77. https://doi.org/10.1149/2.1021702jes.Suche in Google Scholar
15. Gao, Y.; Li, X.; Gong, J.; Fan, B.; Su, Z.; Qu, L. Polyaniline Nanotubes Prepared Using Fiber Mats Membrane as the Template and Their Gas-Response Behavior. J. Phys. Chem. C 2008, 112 (22), 8215–8222. https://doi.org/10.1021/jp711601f.Suche in Google Scholar
16. Bhadra, S.; Singha, N. K.; Khastgir, D. Electrochemical Synthesis of Polyaniline and Its Comparison with Chemically Synthesized Polyaniline. J. Appl. Polym. Sci. 2007, 104 (3), 1900–1904. https://doi.org/10.1002/app.25867.Suche in Google Scholar
17. Shabani-Nooshabadi, M.; Karimian-Taheri, F. Electrosynthesis of a Polyaniline/Zeolite Nanocomposite Coating on Copper in a Three-Step Process and the Effect of Current Density on Its Corrosion Protection Performance. RSC Adv. 2015, 5 (117), 96601–96610. https://doi.org/10.1039/c5ra14333k.Suche in Google Scholar
18. Wang, J.; Polleux, J.; Lim, J.; Dunn, B. Pseudocapacitive Contributions to Electrochemical Energy Storage in TiO 2 (Anatase) Nanoparticles. J. Phys. Chem. C 2007, 111 (40), 14925–14931. https://doi.org/10.1021/jp074464w.Suche in Google Scholar
19. De Adhikari, A.; Shauloff, N.; Turkulets, Y.; Shalish, I.; Jelinek, R. Tungsten-Disulfide/Polyaniline High Frequency Supercapacitors. Adv. Electron. Mater. 2021, 7 (6). https://doi.org/10.1002/aelm.202100025.Suche in Google Scholar
Supplementary Material
This article contains supplementary material (https://doi.org/10.1515/pac-2024-0322).
© 2025 IUPAC & De Gruyter
