Synthesis of carboxymethyl cellulose-β∼cyclodextrin-coated sulfaguanidine and its enhanced antimicrobial efficacy for paper protection
-
Yuxuan Li
Abstract
To enhance the strength and antimicrobial properties of paper cultural relics, and prolong the life of paper cultural relics, it is an urgent need to prepare new material for preservation and protection of paper. In this paper, CMC-β-CD-SG was synthesized with β-CD as carrier and sulfaguanidine as inclusion complex, the suitable conditions for the synthesis of CMC-β-CD-sulfaguanidine was obtained. By testing the effects of different mass concentrations of sulfaguanidine solution on the tensile strength, tearing degree, folding times, whiteness, gloss and antimicrobial properties of the paper, the suitable conditions for coating paper were found. The results show that when inclusion mass concentration of 3 mg/mL is coated on the paper, its mechanical properties are improved, the gloss is slightly increased, and the whiteness is basically unchanged. At the same time, the paper has certain antimicrobial properties, which is in line with the principle of “repairing the old as old”. CMC-β∼CD-SG studied in this paper exhibits properties of reinforcing, slow-releasing and antimicrobial activity for paper protection, which is an innovation of paper protection material, provides the theoretical basis and data reference, as well as a new research idea and technical approach for the development of products for paper protection.
Funding source: Undergraduate Training Program for Innovation and Entrepreneurship in 2024
Award Identifier / Grant number: No. 2024CXCY327
-
Research ethics: Not applicable.
-
Informed consent: Not applicable.
-
Author contributions: The authors have accepted responsibility for the entire content of this manuscript and approved its submission.
-
Use of Large Language Models, AI and Machine Learning Tools: None declared.
-
Conflict of interest: All other authors state no conflict of interest.
-
Research funding: This work was supported by Undergraduate Training Program for Innovation and Entrepreneurship in 2024, No. 2024CXCY327.
-
Data availability: The raw data can be obtained on request from the corresponding author.
References
Bao, Y., Ma, J., and Li, N. (2011). Synthesis and swelling behaviors of sodium carboxymethyl cellulose-g-poly(AA-co-AM-co-AMPS)/MMT superabsorbent hydrogel. Carbohydr. Polym. 84: 76–82, https://doi.org/10.1016/j.carbpol.2010.10.061.Search in Google Scholar
Castillo, I.F., De Matteis, L., Marquina, C., Guillén, E.G., de la Fuente, J.M., and Mitchell, S.G. (2019). Protection of 18th century paper using antimicrobial nano-magnesium oxide. Int. Biodeterior. Biodegrad. 141: 79–86, https://doi.org/10.1016/j.ibiod.2018.04.004.Search in Google Scholar
Chen, Q., Wen, W.Y., Qiu, F.X., Xu, J.C., Yu, H.Q., Chen, M.L., and Yang, D.Y. (2016). Preparation and application of modifed carboxymethyl cellulose Si/polyacrylate protective coating material for paper relics. Chem. Pap. 70: 946–959, https://doi.org/10.1515/chempap-2016-0029.Search in Google Scholar
Dahou, W., Ghemati, D., Oudia, A., and Aliouche, D. (2010). Preparation and biological characterization of cellulose graft copolymers. Biochem. Eng. J. 48: 187–194, https://doi.org/10.1016/j.bej.2009.10.006.Search in Google Scholar
Fan, S.S., Li, T.N., Lu, J.H., Chen, L.P., and Tian, H.D. (2021). Preparation and process optimization of chlorpheniramine maleate hydroxypropyl-β-cyclodextrin inclusion complexes. Chin. J. Pharmaceut. Sci. 11: 68–71.Search in Google Scholar
Fu, G., Chen, Z., Qi, Y., and Li, H. (2023). Response surface methodology optimization and antimicrobial activity of berberine modified trimethoprim carboxymethyl cellulose. Nord. Pulp Pap. Res. J. 38: 271–284, https://doi.org/10.1515/npprj-2022-0057.Search in Google Scholar
Gong, W.Q., Mu, H.L., Gao, H.Y., Zheng, Q., Fang, X.J., Chen, H. J. (2015). Preparation and antimicrobial effect of carvacrol-β-cyclodextrin inclusion complexes. J. Chin. Inst. Food Sci. Technol. 15: 114–119.Search in Google Scholar
Huang, J., Liang, G., Lu, G., and Zhang, J. (2018). Conservation of acidic papers using a dispersion of oleic acid-modifed MgO nanoparticles in a non-polar solvent. J. Cult. Heritage 34: 61–68, https://doi.org/10.1016/j.culher.2018.04.018.Search in Google Scholar
Li, Z.P., Ouyang, Y.Z., Zhang, A.H., and Wu, Y. (2003). Preparation and antibacterial test study of berberine β-cyclodextrin inclusion complex. Fine Chem. Intermed. 06: 46–48+62.Search in Google Scholar
Li, Q., Xi, S., and Zhang, X. (2014). Conservation of paper relics by electrospun PVDF fber membranes. J. Cult. Heritage 15: 359–364, https://doi.org/10.1016/j.culher.2013.09.003.Search in Google Scholar
Liu, Y., Wang, W., and Wang, A. (2010). Adsorption of lead ions from aqueous solution by using carboxymethyl cellulose-g-poly (acrylic acid)/attapulgite hydrogel composites. Desalination 259: 258–264, https://doi.org/10.1016/j.desal.2010.03.039.Search in Google Scholar
Nizam El-Din, H.M., Abd Alla, S.G., and El-Naggar, A.W.M. (2010). Swelling and drug release properties of acrylamide/carboxymethyl cellulose networks formed by gamma irradiation. Radiat. Phys. Chem. 79: 725–730.10.1016/j.radphyschem.2010.01.011Search in Google Scholar
Oshima, T., Kondo, K., Ohto, K., Inoue, K., and Baba, Y. (2008). Preparation of phosphorylated bacterial cellulose as an adsorbent for metal ions. React. Funct. Polym. 68: 376–383, https://doi.org/10.1016/j.reactfunctpolym.2007.07.046.Search in Google Scholar
Potthast, A. and Ahn, K. (2016). Critical evaluation of approaches toward mass deacidifcation of paper by dispersed particles. Cellulose 24: 323–332, https://doi.org/10.1007/s10570-016-1112-x.Search in Google Scholar
Zhang, L. (2013). Preparation and performance evaluation of a new organic guanidine fungicide. Chem. Ind. Times 27: 27–29.Search in Google Scholar
Zhao, G.W., Liao, Z.G., Liang, X.L., and Zhang, X.H. (2009). Preparation of essential oil/β-cyclodextrin inclusion complex of Xylocarum by saturated solution. Jiangxi Tradit. Chin. Med. 40: 73–75.Search in Google Scholar
Zhong, W.J., Shi, L., Liu, Y.L., Lin, X.Y., and Zhang, H.H. (2021). Preparation and characterization of amlodipine β-cyclodextrin inclusion complexes. China Pharm. Guide 18: 31–34.Search in Google Scholar
Zhou, Y.X., Tang, M.L., Yin, H.A., and An, L.Y. (2006). Study on the preparation process of β-cyclodextrin inclusion compound of volatile oil of Trichoderma chinensis and Trichoderma chinensis. Guangzhou Chem. 31: 20–23+36.Search in Google Scholar
© 2025 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Bleaching
- The effect of xylanase on the fine structure of a bleached kraft softwood pulp
- Mechanical Pulping
- Development of handsheet mechanical properties linked to fibre distributions in two-stage low consistency refining of high yield pulp
- Paper Technology
- Analysis of finger ridges in paper manufacturing and development of a qualitative model of their formation
- Paper Physics
- Microfibrillated cellulose coatings for biodegradable electronics
- Paper Chemistry
- Preparation of CMC-β-CD-sulfaguanidine and its application for protection of paper
- Drying characteristics and numerical simulation of tissue paper
- Hemicellulose as an additive in papermaking
- Coating
- Synthesis of carboxymethyl cellulose-β∼cyclodextrin-coated sulfaguanidine and its enhanced antimicrobial efficacy for paper protection
- Integrating barrier chemicals into coating systems for optimized white top testliner performance
- Printing
- Quantifying optical and mechanical contributions to dot gain
- Packaging
- The impact of cellulosic pulps on thermoforming process: effects on formation time and drainage efficiency
- Environmental Impact
- Assessing the impact of substituting hypo sludge (paper pulp) in cement and introducing natural fiber in the form of human hair to enhance compressive strength in concrete
- Recycling
- Atomization numerical simulation of high solids content bamboo pulping black liquor based on VOF model
- A review of the fractionation and properties of lignin derived from pulping black liquor and lignocellulose pretreatment
- Lignin
- In-situ construct dynamic bonds between lignin and PBAT by epoxidized soybean oil to improve interfacial compatibility: processing, characterization, and antibacterial activity for food packaging
- Separation of high-yield and high-purity lignin from Elm wood using ternary deep eutectic solvents
Articles in the same Issue
- Frontmatter
- Bleaching
- The effect of xylanase on the fine structure of a bleached kraft softwood pulp
- Mechanical Pulping
- Development of handsheet mechanical properties linked to fibre distributions in two-stage low consistency refining of high yield pulp
- Paper Technology
- Analysis of finger ridges in paper manufacturing and development of a qualitative model of their formation
- Paper Physics
- Microfibrillated cellulose coatings for biodegradable electronics
- Paper Chemistry
- Preparation of CMC-β-CD-sulfaguanidine and its application for protection of paper
- Drying characteristics and numerical simulation of tissue paper
- Hemicellulose as an additive in papermaking
- Coating
- Synthesis of carboxymethyl cellulose-β∼cyclodextrin-coated sulfaguanidine and its enhanced antimicrobial efficacy for paper protection
- Integrating barrier chemicals into coating systems for optimized white top testliner performance
- Printing
- Quantifying optical and mechanical contributions to dot gain
- Packaging
- The impact of cellulosic pulps on thermoforming process: effects on formation time and drainage efficiency
- Environmental Impact
- Assessing the impact of substituting hypo sludge (paper pulp) in cement and introducing natural fiber in the form of human hair to enhance compressive strength in concrete
- Recycling
- Atomization numerical simulation of high solids content bamboo pulping black liquor based on VOF model
- A review of the fractionation and properties of lignin derived from pulping black liquor and lignocellulose pretreatment
- Lignin
- In-situ construct dynamic bonds between lignin and PBAT by epoxidized soybean oil to improve interfacial compatibility: processing, characterization, and antibacterial activity for food packaging
- Separation of high-yield and high-purity lignin from Elm wood using ternary deep eutectic solvents
