Skip to main content
Article Publicly Available

Frontmatter

Published/Copyright: May 23, 2021
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Materials Testing
From the journal Materials Testing Volume 63 Issue 5

Published Online: 2021-05-23
Published in Print: 2021-05-26

© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany

Articles in the same Issue

  1. Frontmatter
  2. Materials testing for welding and additive manufacturing applications
  3. Fracture characterization and modeling of Gyroid filled 3D printed PLA structures
  4. Component-oriented testing and simulation
  5. Experimental and numerical investigation of cutting forces during turning of cylindrical AISI 4340 steel specimens
  6. Modeling and simulation in materials testing
  7. Mechanical behavior of composite parts joined through different processes
  8. Materials testing for welding and additive manufacturing applications
  9. Effect of TIG welding parameters in joining grade 2 pure titanium
  10. Materialography/chemical resistance testing
  11. Precipitated phase in the β phase of IN783 alloy
  12. Component-oriented testing and simulation
  13. Notch (stress concentration) factor estimation of a cylinder under internal pressure using different approaches
  14. Materials testing for joining and additive manufacturing applications
  15. Effect of fiber orientation angle on patch repaired composite plates
  16. Component-oriented testing and simulation
  17. A comparative analysis of the queuing search algorithm, the sine-cosine algorithm, the ant lion algorithm to determine the optimal weight design problem of a spur gear drive system
  18. Comparison of the arithmetic optimization algorithm, the slime mold optimization algorithm, the marine predators algorithm, the salp swarm algorithm for real-world engineering applications
  19. A novel hybrid marine predators-Nelder-Mead optimization algorithm for the optimal design of engineering problems
  20. Wear testing
  21. Wear behavior of rice straw powder in automotive brake pads
  22. Mechanical testing/chemical resistance testing
  23. Effects of MgO Powder addition on mechanical, physical and thermal properties of Al waste bagasse composite
  24. Wear testing
  25. Short term tribological behavior of ceramic and polyethylene biomaterials for hip prosthesis
  26. Production-oriented testing
  27. Experimental validation of the predicted peak cutting force for seafloor polymetallic sulfide
https://doi.org/10.1515/mt-2021-frontmatter5

Articles in the same Issue

  1. Frontmatter
  2. Materials testing for welding and additive manufacturing applications
  3. Fracture characterization and modeling of Gyroid filled 3D printed PLA structures
  4. Component-oriented testing and simulation
  5. Experimental and numerical investigation of cutting forces during turning of cylindrical AISI 4340 steel specimens
  6. Modeling and simulation in materials testing
  7. Mechanical behavior of composite parts joined through different processes
  8. Materials testing for welding and additive manufacturing applications
  9. Effect of TIG welding parameters in joining grade 2 pure titanium
  10. Materialography/chemical resistance testing
  11. Precipitated phase in the β phase of IN783 alloy
  12. Component-oriented testing and simulation
  13. Notch (stress concentration) factor estimation of a cylinder under internal pressure using different approaches
  14. Materials testing for joining and additive manufacturing applications
  15. Effect of fiber orientation angle on patch repaired composite plates
  16. Component-oriented testing and simulation
  17. A comparative analysis of the queuing search algorithm, the sine-cosine algorithm, the ant lion algorithm to determine the optimal weight design problem of a spur gear drive system
  18. Comparison of the arithmetic optimization algorithm, the slime mold optimization algorithm, the marine predators algorithm, the salp swarm algorithm for real-world engineering applications
  19. A novel hybrid marine predators-Nelder-Mead optimization algorithm for the optimal design of engineering problems
  20. Wear testing
  21. Wear behavior of rice straw powder in automotive brake pads
  22. Mechanical testing/chemical resistance testing
  23. Effects of MgO Powder addition on mechanical, physical and thermal properties of Al waste bagasse composite
  24. Wear testing
  25. Short term tribological behavior of ceramic and polyethylene biomaterials for hip prosthesis
  26. Production-oriented testing
  27. Experimental validation of the predicted peak cutting force for seafloor polymetallic sulfide
Downloaded on 24.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/mt-2021-frontmatter5/html?lang=en
Scroll to top button